HP parts list for C5325A HP printer/scanner/copier 370
C3801-80059Absorber - Spittoon sponge - Absorbs excess ink from black cartridges
C3801-80060Absorber - Spittoon sponge - Absorbs excess ink from color cartridges
C3801-80061Absorber - Spittoon sponge - Located in bottom of spittoon
C5325A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C5325A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C5325A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C5325A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
C5325A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
C5325A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
C5325A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
C5325A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
C5325A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
C5325A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
C5325A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
C5325A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
C5325A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
C3801-60040Arm - Tension arm - Maintains tension on carriage belt
C5325A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
5063-1256Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
8121-1037Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long
C2950ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C3801-80007Cable - Ribbon cable - Has 30-pin (M) connectors - 13.3cm (5.2in) long
C3801-80020Cable - Cable assembly - Has 3-pin (F) connectors - 25.0cm (9.8in) long
C3801-80029Cable - Cable assembly - Has 3-pin (F) connectors - 18.1cm (7.1in) long
C3801-80069Cable - Cable assembly - Has 14-pin (F) connectors - 40.6cm (16in) long
C3801-80072Cable - Cable assembly - Has 5-pin (F) connectors - 11.8cm (4.6in) long
C3801-80073Cable - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long
C3803-60013Cable - Rear panel power socket/power cable assembly - C14 (M) power socket to an 18cm (7.1in) cable with a 3-pin (F) connector and a 22.3cm (8.8in) ground wire with a ring terminal
C5316-80002Cable - Ribbon cable - Has 15-pin (M) edge connectors - 17.2cm (6.8in) long
C6680-80003Cable - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long miniconnector
C5325A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C5325A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C5325A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C5325A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C5325A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C5325A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C3801-40158Cap - Cap - Holds left end of carriage rod in print mechanism
C3801-40159Cap - Cap - Holds right end of carriage rod in print mechanism
C5325A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C6659-60042Carriage - Carriage assembly with four flexible cables
C5325A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C5325A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C5325A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C5325A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C5325A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C5325A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C5325A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C5325A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
5183-5267Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
C5325A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
1400-2186Clamp - Clamp - Holds the cable for the print mechanism paper detect sensor to the back, left, rear of the print mechanism
C3801-40020Clamp - Clamp - Holds carriage trailing cable in place
C3801-60126Clutch - Clutch assembly - Used to prevent reversal of the starwheel shaft and output roller - Located on left end of starwheel assembly
C5325A-Clutch_ADFClutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder
C5325A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C5324-60001Control Panel - Control panel panel assembly - Does NOT include the overlay (Note: requires special removable tool for replacement)
C5325A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C5324-40013Cover - Rear cover plate - Covers the left side (rear view) empty port slot
C5324-60009Cover - Scanner cover assembly (Upper ADF) - Has soft yellow plastic rollers - Helps to feed documents over the scanner assembly
C6659-60038Cover - Scanner cover assembly (Upper ADF) - Covers the scanner glass - Helps to feed documents over the scanner assembly - Has hard black plastic rollers
C5325A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C5325A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C5325A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C3801-60052Deflector - Paper deflector - Directs paper from the media chassis to the print section of the printer chassis assembly
C5325A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6659-60052Deflector - Control panel/keypad and display assembly (Old style) - Has male male pin connector for control panel cable - No longer available - Order New style main logic PC board, New style control panel, New style control panel cable
C5324-60111Door - Print cartridge access door (Flint Gray) - Large lift-up door on top of the printer/scanner/copier
C5325A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C5325A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C5325A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C3801-60051Drive Assembly - Pick roller assembly - Long shaft with multiple rollers - Used in automatic sheet feeder
C5324-60010Drive Assembly - Media chassis assembly (Paper drive) - Moves paper from ADF assembly to scanner assembly - Includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C5325A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C5325A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C5325A-Feed_RollersFeed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
C5325A-Feed_Rollers_ADFFeed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.
C3828AFilm - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832AFilm - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834AFilm - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C3835SFilm - HP Premium Trans Film 250 Sht Value Pack
C3836AFilm - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets
C3837AFilm - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series
C6051AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053AFilm - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C3801-40100Flag - Paper detect flag - Mounts on bottom of media chassis - Used to detect edge of paper
C3801-40119Flag - Paper detect flag - Located on the back, left, rear of the print mechanism - Used to detect edge of paper
C5325A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
C5324-69006Print Mechanism - Print mechanism assembly - Includes motors, carriage drive belt, carriage assembly, service station, sled, starwheel assembly, and pen driver PC board
C5325A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C5325A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C6659-69002Scanner - Line interface unit (LIU) - Plug-in fax/phone line module - Does NOT come with LIU to wall socket cable (for Israel, Korea, and Taiwan)
C5325A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C5325A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
C5325A-Scanner_UnitScanner Unit - Scanner unit includes the entire scanner base but not the ADF portion.
1990-1972Sensor - Optical sensor for HP OfficeJet 700 Series
C5325A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
C5325A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C5325A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C5325A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C5325A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6659-10101Service Manual - Service manual, technical support solutions guide and user's guide CD-ROM for print/scan/copy 370/380, OfficeJet 500/520/570/580/590/600/610/630/635/700/710/720/725, fax 910/920, OfficeJet Pro 1150/1170/1175, color copier 140/150
C5324-60003Service Station - Print cartridge service station assembly
C5325A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position