HP parts list for C5876A HP DeskJet 890Cxi Color Inkjet Printer
C2145-60071Absorber - Blotter (absorber) assembly - Includes frame and blotter pads
C2145-80021Absorber - Blotter pad - Cleans the ink cartridge before being capped - Narrow pad for black ink cartridge (one per package)
C2145-80022Absorber - Blotter pad - Cleans the ink cartridge before being capped wide pad for color ink cartridge (one per package)
C5876A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C5876A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C2145-40046Actuator - Door actuator - Actuates access door open switch
C5876-40008Actuator - Power button actuator - Power button/arm from front panel
C5876-40009Actuator - Reset actuator - Reset button/arm from front panel
C5876A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C2145-40059Adjuster - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
C2145-40090Adjuster - Pivot stop adjuster - Installed near left end of carriage plate
C4555-40043Adjuster - Z axis service station adjustment (ZASSA)
C2145-40020Arm - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
C4602-40039Arm - Clutch actuator arm - Used to engage the pivot gears
C5876A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
5063-1256Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2950ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C4602-60018Cable - Power supply cable with ferrite - Has 12-pin (F) connectors - 8.2cm (3.2in) long
C4602-80004Cable - Head drive flex cable - 43.2cm (17in) long
C5876-60103Cable - Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
C5876A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C5876A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C5876A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C5876A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C5876A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C5876A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2128-40015Cap - Left lifter cap - Holds the pressure plate lifter in place
C2128-40032Cap - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
C5876A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C2145-67851Carriage - Carriage assembly - Does not include trailing cable
C5876A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C5876A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C5876A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C5876A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C5876A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C5876A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C5876A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C5876A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C4602-40002Cover - Top cover - Does not include carriage access door
C4602-60025Cover - Base Assembly - Bottom Cover - With Four Rubber Feet
C4602-80007Cover - Power supply cover - Shields and protects power supply PC board
C5876A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C5876A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C5876A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C5876A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C2145-40083Preloader - Carriage pre-loader - Holds the carriage against the carriage rod
C4555-67805Preloader - Drive roller pre-loader - Applies tension to the drive roller shaft
C4531-60014Pressure Assembly - Pressure plate assembly - Lifts paper stack to be printed
C4602-69801Print Mechanism - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
C5876A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C6429-60225Print Mechanism - DeskJet 970Cxi - Does not include power cord - Configured for English font
5183-5268Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C5876A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2145-20019Retainer - Washer retainer - Holds carriage rod lubrication washers in place
C2145-20007Rod - Carriage rod - Shaft that the carriage assembly rides on
C5876A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C5876A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60020Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6450-60021Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C4602-60026Service Parts - Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
C5876A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C2145-00042Stiffener - Encoder stiffener - Prevents oscillation of encoder strip
C2145-80016Strip - Encoder strip - Carriage position sensor reference
C2145-40151Support - Chimney wall - Wall support of spittoon
C4602-40044Support - I/O deck - Holds wings and single sheet width adjuster
9301-1717Tool - 35cc syringe - For use with carriage slider rod lubricant
C5876A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
C4602-60037Tray - I/O deck - Holds wings and single sheet width adjuster
C5876A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
C5876A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.