C5870-80007Absorber - Spittoon sponge - Absorbs excess ink from cartridges
C6413A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C6413A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C6413A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C6409-40021Adjuster - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel
C6413A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C6413A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C6413A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C6413A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C6413A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C6413A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C6413A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C6413A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C6413A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C6411-40008Cover - Main logic PCA cover - Has cut outs for the USB interface socket, parallel interface socket, and power module socket
C6413A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C6413A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C6413A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C6413A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6413A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
C4557-40014Plate - Back Plate - Holds Latch Spring, Knob and Latch Components of Rear Cleanout Assembly
C6409-40028Plate - Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt
C6455-60057Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly
8120-8336Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan)
8120-8337Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia and New Zealand)
8120-8341Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8120-8345Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in South Africa and India)
8120-8346Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China)
8120-8900Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) Part 8120-8330 is no longer supplied. Please order the replacement, 8120-8900
8121-0022Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8121-0023Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal)
C6413A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
C6409-60014Power Module - Power supply module - 100V/240V, 50/60Hz - Requires separate AC power cord - For worldwide use
C6413A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C6413A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C6413A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C6413A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
J3263-61001Print Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network
J3263-69001Print Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network
J3263APrint Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN
J3265APrint Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4101-61011Print Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector
C6411-69007Printer - Replacement DeskJet 830C/832C printer - Does not include power module or power cord - Configured for English font
5183-5268Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C6413A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C4557-20002Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide
C4557-40015Roller - Rear roller (Black) - Between paper and rear paper guide
C4557-60025Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
C5870-40030Roller - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel
C5870-60092Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA
C6409-60037Roller - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel
C6426-60049Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings
C6413A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C6413A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C4557-60011Separator - Separator pad for HP DeskJet 700 Series
C6413A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C6413A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60021Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6413A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C4557-20027Shaft - Cartridge latch shaft near top of carriage
C4557-40066Shaft - Drive shaft with molded gears on each end
C6413A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6413-40006Stop - Fine paper length adjuster (Periwinkle) - Holds paper firmly against the back of the paper input tray
C4557-80001Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C5870-00004Strip - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion
C6409-00008Support - Upper paper guide support - Base for upper paper guide
J4153ASwitch - JetDirect Auto Switch - Share one parallel device between two computers or access two parallel devices with one computer - Bidirectional IEEE 1284 compatible - Includes one 1.8m (6ft) bidirectional parallel cable
J4154ASwitch - JetDirect Auto Switch - Share one parallel device between four computers or access four parallel devices with one computer - Bidirectional IEEE 1284 compatible - Includes one 1.8m (6ft) bidirectional parallel cable
C6413A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.