C5870-80007Absorber - Spittoon sponge - Absorbs excess ink from cartridges
C6414H-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C6414H-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C6414H-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
5188-6700Adapter - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
C6409-40021Adjuster - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel
C6414H-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C6414H-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C6414H-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C6414H-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C6414H-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C6414H-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C6414H-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C6414H-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C6414H-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C6458ACartridge - Top/front access door assembly - Print cartridge access door with Strawberry colored window - Replaces the existing door
C6459ACartridge - Top/front access door assembly - Print cartridge access door with Lime colored window - Replaces the existing door
C6460ACartridge - Top/front access door assembly - Print cartridge access door with Tangerine colored window - Replaces the existing door
C6461ACartridge - Top/front access door assembly - Print cartridge access door with Grape colored window - Replaces the existing door
C6462ACartridge - Top/front access door assembly - Print cartridge access door with Blueberry colored window - Replaces the existing door
C6411-40008Cover - Main logic PCA cover - Has cut outs for the USB interface socket, parallel interface socket, and power module socket
C6414H-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C6414H-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C6414H-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C6414H-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6414H-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
C4557-40014Plate - Back Plate - Holds Latch Spring, Knob and Latch Components of Rear Cleanout Assembly
C6409-40028Plate - Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt
C6455-60057Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly
8120-8336Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan)
8120-8337Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia and New Zealand)
8120-8341Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8120-8345Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in South Africa and India)
8120-8346Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China)
8120-8900Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) Part 8120-8330 is no longer supplied. Please order the replacement, 8120-8900
8121-0022Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8121-0023Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal)
C6414H-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
0957-2340Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
C6414H-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
5183-5268Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C6414H-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C4557-20026Retainer - Felt retainer - Holds the lubricating felt to the side of the carriage
C6409-80030Retainer - Left carriage retainer - Protects the carriage assembly from damage during shipment
C6409-20004Rod - Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel
C4557-20002Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide
C4557-40015Roller - Rear roller (Black) - Between paper and rear paper guide
C4557-60025Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
C5870-40030Roller - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel
C5870-60092Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA
C6409-60037Roller - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel
C6426-60049Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings
C6414H-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C6414H-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C4557-60011Separator - Separator pad for HP DeskJet 700 Series
C6414H-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C6414H-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60021Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6414H-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C4557-20027Shaft - Cartridge latch shaft near top of carriage
C4557-40066Shaft - Drive shaft with molded gears on each end
C6414H-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6410-40006Stop - Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray
C4557-80001Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C5870-00004Strip - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion
C6409-00008Support - Upper paper guide support - Base for upper paper guide
C6414H-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.