C6450-80052Absorber - Spittoon sponge - located in bottom of spittoon
C6450B-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C6450B-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C6450B-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C2128-40055Adjuster - PPS adjuster - Used to adjust the distance between the pivot and the pen
C4549-40028Arm - Lever arm - Used to lift the pressure plate lifter
C6450B-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
5063-1256Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2162-60009Cable - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
C2950ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C6450B-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C6450B-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C6450B-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C6450B-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C6450B-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C6450B-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2128-40015Cap - Left lifter cap - Holds the pressure plate lifter in place
C2128-40032Cap - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
C6450B-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C6450-60101Carriage - Carriage assembly - Includes flex cable and bushings
C6450B-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C6450B-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C6450B-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C6450B-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C6450B-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C6450B-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C6450B-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C6450B-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
5183-5267Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
C4562-60065Chassis - Chassis assembly - The large plastic item that forms the base of the print mechanism
C6450B-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C2162-00011Clip - ESD clip - Protects stepper motor from ESD damage
C6450B-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C6450B-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C4549-40001Cover - Top cover - Main upper housing with molded input tray - Does NOT include cartridge access top cover - Quartz Gray
C5884-40009Cover - I/O cover - Allows access to logic PCA I/O port connector - Quartz Gray
C5884-60002Cover - Top cover assembly - Includes top cover and keypad assembly - Does NOT include carriage access door
C6450B-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C6450B-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C6450B-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C6450B-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6450-69103Print Mechanism - Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station operations
C6450B-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C6450B-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2162-20005Rod - Carriage rod - Supports horizontal carriage movement
C6450B-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C6450B-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60020Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6450-60021Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C4562-60045Service Station - Service station assembly - Includes motor
C6450B-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C6450-60102Sled - Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges
C6450B-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C4549-40025Slider - Rear slider - Prevents the carriage from tilting forward
C6450B-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.