C6450-80023Absorber - Spittoon sponge - Located in bottom of spittoon
C6464A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C6464A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C4549-40027Actuator - Clutch actuator - Pulls the clutch against the drive gear which starts the media picking process
C6464A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C2128-40055Adjuster - PPS adjuster - Used to adjust the distance between the pivot and the pen
C4549-40028Arm - Lever arm - Used to lift the pressure plate lifter
C6464A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
5063-1256Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2162-60009Cable - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
C2950ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C6518ACable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
C6464A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C6464A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C6464A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C6464A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C6464A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C6464A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2128-40015Cap - Left lifter cap - Holds the pressure plate lifter in place
C2128-40032Cap - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
C6464A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C6464A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C6464A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C6464A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C6464A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C6464A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C6464A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C6464A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C6464A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
5183-5267Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
C4562-60065Chassis - Chassis assembly - The large plastic item that forms the base of the print mechanism
C6464A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C2162-00011Clip - ESD clip - Protects stepper motor from ESD damage
C6464A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C6464A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C6464-40002Cover - I/O cover - Allows access to logic PCA I/O port connector
C6464-40005Cover - Top cover assembly (Glacier Gray) - Does not include keypad assembly or carriage access door
C6464A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C6464A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C6464A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C6464A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6464A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C6464A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2162-20005Rod - Carriage rod - Supports horizontal carriage movement
C6464A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C6464A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-40011Spitton - Spittoon - Holds ink expelled from cartridge during refresh cycle
C6464A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C2124-00001Spring - Encoder spring - Provides tension for encoder strip
C2124-00009Spring - Spring - Installed in spittoon assembly
C2124-20008Spring - Limiter spring - Provides tension for rotation limiter
C2128-00002Spring - Kicker spring - Provides tension for the kicker
C2128-00006Spring - Separator spring - Provides pressure between the separator assembly and the center drive roller
C2145-00017Spring - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
C2162-20004Spring - Pivot spring - Provides tension for pivot to return to upright position
C2162-67806Spring - Preloader - Applies downward pressure on drive shaft
C2164-00016Spring - Sled bias spring - Holds sled in position in service station
C6464A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C2162-67802Stop - Paper width adjustment stop - Adjusts for input paper width
C4549-40017Stop - Right wall stop - Maintains alignment of small media sizes in the input tray
C6464-60018Stop - Output tray extender, length adjustment, and paper catch - Blue
C4562-60018Storage System - Garage assembly - Holds print cartridge when not in use - Also referred to as a 'cartridge humidor'
C2124-80008Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C6464A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.