HP parts list for C8147A HP Deskjet 450cbi printer
C8111-67017Absorber - Ink container module - User can remove from the printer when the ink level is full and replace with a new one - Made of mostly plastic parts with a spong inside the container.
C8111-67026Absorber - Absorber for HP DeskJet 450 Series
C8111-67053Absorber - ASSY K ABSORBER SVC Ink container module - User can remove from the printer when the ink level is full and replace with a new one - Made of mostly plastic parts with a spong inside the container REPLACES C8111-67017
C8147A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C8147A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C8147A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C8147A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C8111-67055Carriage - Carriage assembly - Holds the ink cartridges
C8147A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C8147A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C8147A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C8147A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C8147A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C8147A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C8147A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C8147A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C6656ANCartridge - 56 Black InkJet Cartridge - 19 ml (North America)
C6657ANCartridge - 57 Tri-Color InkJet Print Cartridge - 17 ml - Prints approximately 500 pages (North America)
C8232ACase - Executive carrying case for DeskJet 450
C8242ACase - Carrying case for DeskJet 450 mobile printer
C8147A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C8111-67038Cleaner - Cleaning kit for HP DeskJet 450 Series
C8111-67043Cleaner - Printer rollers cleaning kit - Has double tape on both sides of the paper. Used to remove the paper dust and dirt on the rollers to improve pick performance. Comprised of 3 cleaning sheets, instructions, cardboard and 1 sheet of protected backing in one
C8147A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C8147A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C8147A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C8147A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C8147A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C8147A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C8147A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C8147A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
C8147A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
C8111-67046Plotter - Top case assembly - Without key pan
8120-8336Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan)
8120-8337Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia and New Zealand)
8120-8341Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8120-8345Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in South Africa and India)
8120-8900Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) Part 8120-8330 is no longer supplied. Please order the replacement, 8120-8900
8121-0022Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8121-0023Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal)
C8147A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
0950-4207Power Module - Power supply module or adapter - One end for connecting to the printer and other end for the power cord
C8112-80019Power Module - Power supply module or adapter - One end for connecting to the printer and other end for the power cord
C8147A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C8147A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C8147A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C8147A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C8147A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C8147A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C8147A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C8147A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C8147A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.