C6490-80022Absorber - Service station absorber (sponge) - Soaks up used ink during cartridge cleaning
C9052A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C9052A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C8963-40144Actuator - Door actuator - Connects to the ink cartridge access door
C9052A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
5188-6700Adapter - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
C9052A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C6518ACable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
C9052A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C9052A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C9052A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C9052A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C9052A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C9052A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C9052A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C8963-60009Carriage - Carriage assembly - Holds and positions print cartridges
C9052A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C9052A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C9052A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C9052A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C9052A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C9052A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C9052A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C9052A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C8765WNCartridge - 94 Black print cartridge (small body) - Prints approximately 450 pages at 5% coverage (North America)
C8766WNCartridge - 95 Tri-color Print Cartridge - Print cartridge volume 7ml - Prints 260 pages at 15% coverage (North America)
C9363WNCartridge - 97 Tri-color Print Cartridge - Prints approximately 450 pages at 15% coverage (North America)
C9052A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C9052A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C9052A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C9052A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C9052A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C9052A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C9052A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
Q5712ADuplexer - Auto-duplexer (not wide format) - HP Auto Two-Sided Printing Accessory (Duplexer) - Prints on both sides of paper without flipping pages manually for select OfficeJet 7000 Series; Photosmart 2600 2700 8100 8400 Series; and DeskJet 6500 6800 series printers.
C8963-80014Encoder - Encoder strip (clear strip with position marks) - Used by the sensor in the carriage assembly to determine position
C8963-80074Encoder - Encoder strip (clear strip with position marks) - Used by the sensor in the carriage assembly to determine position
C9052A-EncoderEncoder - Encoder spring - provides tension for encoder strip
C9052A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
C9052A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C9052A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C9052A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
J6035CPC Board Interface - JetDirect 175X Fast Ethernet external print server - Has on 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
J6061-61011PC Board Interface - Jtdrct 802.11b ext wrls pt server us, JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server
J6061APC Board Interface - HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable
J7942APC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module
J7942GPC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module
C9052A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
0950-4476Power Module - Power module (universal / worldwide) - Input voltage 100-240VAC 1500mA - Output voltage 32VDC 1560mA - Requires a separate detachable AC power cord with C13 connector
0957-2105Power Module - PWR-SPLY-AC-DC ADAPTER; 50W ROHS Power module - Input voltage 100-240VAC 50/60Hz - Output voltage 32VDC 1.56A 50 watts - Requires separate 3-wire AC power cord with C-13 connector (not included).
0957-2109Power Module - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
0957-2110Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2197Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
C9052A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C9052A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
0957-2192Power Supply - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
5188-5673Power Supply - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A
C9052A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C9052A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C9052A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C9052A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C9052A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C9052A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C9052A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C8963-60006Service Station - Service station assembly - For conditioning the ink cartridges when the carriage is in its home position
C9052A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C9052A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C9052A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.