HP parts list for CQ114A HP scitex fb500 industrial printer
CH971-62824Accessory - Adhesive backed ruler - English metric ruler - 2.5m (98-inches) long and can be cut down for the 1.6m (64-inches) size - This is the ruler located with the N-up alignment pins
CH971-63114Accessory - High Density Polyethylene (HDPE) funnel - 32Oz capacity - Facilitates emptying ShopVac waste ink into waste ink bottle
CQ114-60115Accessory - Components kit - For the Scitex FB500/FB700 printer
CQ114-67145Accessory - Complete accessory table - The input and output accessory tables are identical - For the Scitex FB500 printer
CQ114-67157Accessory - Media spool accesory - For the Scitex FB500 roll-to-roll accessory - Does not include media collets.
CQ114-67186Accessory - Accessory fasteners - Collection of various fasteners used in multiple locations on the tables and the roll-to-roll accessory - For the Scitex FB500/FB700 printers
CQ114-67068Actuator - Lifting actuator for the rail - For the Scitex FB500/FB700 printer
CQ114-67082Actuator - Lifting motor/actuator - For the service station
CQ114-67094Actuator - 75mm stroke actuator assembly - This is the actuator and all associated bracketry and hardware plus the lift encoder reader and strip - Used for the input and output media hold-down rollers and the alignment bar - For the Scitex FB500/FB700/FB950 printers
CQ114-67168ADF Roller Kit - Drain fitting kit - Includes the elbow on the service station basin, the spigot on the printer frame, and associated hardware - Does not include the hose between the basin and the spigot
CQ114-20075Airflow Guide - Air valve/manifold assembly - Mounts on the rear of the carriage above the trolley - For the Scitex FB500/FB700 printer
CQ114-67010Airflow Guide - Air valve/manifold assembly - Mounts on the rear of the carriage above the trolley - For the Scitex FB500/FB700 printer
CQ114-67004Bar - Media alignment bar - For the Scitex FB500 printer
CQ114-67020Bar - Axis alignment bar - Bar with adjustment screws to control the Y-axis alignment of the printheads on the carriage - For the Scitex FB500/FB700 printer
CQ114-67071Bar - Anti-static ionizer bar - For the Scitex FB500 printer
CQ114-67135Bar - 18-inch long roller bar - Used on the standard input table - For the Scitex FB500/FB700 printer
CQ114-67140Bar - 32-inch long roller bar - Used on the standard output and accesory tables - For the Scitex FB500/FB700 printer
CQ114-67155Bar - Take-up dancer roller bar (roll-to-roll accessory) - The dancer bar is the movable bar when the take-up system is operational
CQ114-67027Bearing - Linear bearings - For rail up/down motion - For the Scitex FB500/FB700/FB950 printer
CQ114-67055Bearing - Bearing assembly - Includes the drive roller bearing, block, and retaining ring - For the Scitex FB500/FB700 printer
CQ114-67056Bearing - Bearing assembly - Includes the idler roller bearing, block, and retaining ring - For the Scitex FB500/FB700 printer
CH971-90710Belt - Carriage drive timing belt - Located between the carriage drive motor and the carriage drive shaft. Carriage Drive Timing Belt For HP DJ H35100 H35500 H45500 H45100 and similar Scitex Designjet model family types.
CH980-00015Belt - Carriage Timing Belt Scitex FB700 FB500 series. BELT TIMING SMM_P.HTD. 104_GROOVE 312PITCH_LENGTH.
CQ114-67022Belt - Main carriage belt (blue belt) - Includes the metal clips that attach to the belt and secure the belt to the carriage - For the Scitex FB500 printer
CQ114-67063Belt - Media belt - For the Scitex FB500 printer
CQ114-67079Belt - Service station wiper drive belt - For the Scitex FB500/FB700 printer
CQ114-67172Belt - Motor belt - Drive belt between the take-up motor and the take-up spool shaft on the roll-to-roll accessory - For the Scitex FB500/FB700 printers
CQ114-67107Bezel - Front bezel - Bezel that surrounds the LCD along with the HP insignia - For the Scitex FB500/FB700 printer
CQ114-67077Blade - Doctor blade - For cleaning the service station wiper - For the Scitex FB500/FB700 printer
CQ114-67167Blade - Service station wiper blade - For the Scitex FB500/FB700 printer
CH971-91400Blower Assembly - Belt vacuum blower assembly - Includes one blower - Used to suck down media to belt - For the FB500/FB700/FB950/FB910
CH154-67014Bottle - Waste ink bottle - One gallon bottle with warning label for collection of UV liquid wastes
CH154-67015Bottle - Flush bottle - Squeeze bottle with label for UV flush
CH154-00009Bracket - Bracket - Attaches the ionizer bar to the back of the rail - Used on Scitex FB500/FB950 printers
CH971-57219Bracket - Carriage drive bracket - For use with Designjet H series and Scitex FB910/FB950 printers
CQ114-00076Bracket - Mounting bracket - For the outer cover on the input user side - For the Scitex FB500/FB700 printer
CQ114-00077Bracket - Mounting bracket - For the outer cover on the input service side - For the Scitex FB500/FB700 printer
CQ114-67044Bracket - Chain bracket - Mounts to the top of the trolley plate for attaching the umbilical track - For the Scitex FB500/FB700 printer
CQ114-67130Bracket - Corner bracket - Located at the top of the table stand - Two are used per table
CQ114-67148Bracket - Foam-roller bracket - Positions the roll-to-roll accessory foam rollers on the belt surface - Located on the user-side for the Scitex FB500/FB700 printer
CQ114-67149Bracket - Foam-roller bracket - Positions the roll-to-roll accessory foam rollers on the belt surface - Located on the service-side for the Scitex FB500/FB700 printer
CQ114-67151Bracket - Supply bracket assembly - Located on user-side - Supports the media supply spool and holds the foam rollers when they are not in use - For the Scitex FB500/FB700 printer
CQ114-67152Bracket - Supply bracket assembly - Located on service-side - Supports the media supply spool and holds the foam rollers when they are not in use - For the Scitex FB500/FB700 printer
CQ114-67153Bracket - Take-up bracket assembly - Located on the user-side - Includes the parts related to the dancer bar assembly - For the Scitex FB500/FB700 printer
CQ114-67154Bracket - Take-up bracket assembly - Located on the service-side - Includes the parts related to the dancer bar assembly - For the Scitex FB500/FB700 printer
CQ114-67173Bracket - Dancer bar bracket - Small bracket that locks the dancer bar on the roll-to-roll accessory into its high position - For the Scitex FB500/FB700 printers
CQ114-67201Bracket - Spacer/bracket - Bridges the gap between the carriage proper and the lamp housings - For the Scitex FB500/FB700 printers
CQ114-67180Brush - Ionizer brush - Used to clean the points on the anti-static ionizer bar
CQ114-67207Bumper - Adhesive-backed foam bumper - Used for the carriage drive idler
CH971-50014Cable - Cable assembly - Braided ribbon cable from OHS board to I/O board - For the Scitex FB500/FB700/FB910/FB950 printers
CQ114-67006Cable - Carriage valve cable - Cable from headboard to the valve/manifold assembly - For the Scitex FB500/FB700 printer
CQ114-67031Cable - UV power output cable - Cable from the UVPS to the external connector on the electronics assembly for the track UV power cable - The external connector is integrated with this cable
CQ114-67033Cable - Cable assembly - Cable in the electronics assembly that goes from the AC distribution board to the 24 VDC vacuum power supply and to the service station ShopVac - For the Scitex FB500/FB700 printer
CQ114-67035Cable - Cable assembly - Cable that goes from the AC distribution board to the ATX power supply - For the Scitex FB500/FB700 printer
CQ114-67036Cable - Ribbon cable - Ribbon cable from the I/O board to the motor driver board - For the Scitex FB500/FB700 printer
CQ114-67039Cable - Cable assembly - Cable goes from the OHS board to the external 4-pin connector in the ink rack area for the white ink homogenizer
CQ114-67051Cable - Serial data cable - Touch-sensitive data transmission cable - Located between the LCD control panel and the I/O board
CQ114-67052Cable - VGA cable - Located between the LCD control panel and the motherboard - For the video display
CQ114-67061Cable - Tray fan cable - Cable assembly used in the belt vacuum table - For the Scitex FB500 printer
CQ114-67087Cable - Service station lifting encoder cable - For the Scitex FB500/FB700 printer
CQ114-67098Cable - Main AC input cable assembly - Includes the filtered AC inlet and cable/connector to the AC distribution board - For the Scitex FB500/FB700 printer
CQ114-67099Cable - Cable assembly - Cable runs from the back of the I/O board (J28) to many internal components, including the ebox fans, on/off switch, UVPS cable connect sense, and foot switch - For the Scitex FB500 printer
CQ114-67101Cable - Cable harness - Includes all six pump cables - Located from the OHS board to the ink pumps - For the Scitex FB500/FB700 printer
CQ114-67105Cable - Cable assembly - Cable in the electronics assembly that goes from the AC distribution board to the relays on the I/O board (this is power cable to the Ionizer) - For the Scitex FB500/FB700 printer
CQ114-67147Cable - AC power distribution cable - Cable goes from the AC distribution board to the output for the roll-to-roll accessory (the external outlet for the RTR connection is integrated to the cable) - For the Scitex FB500/FB700 printer
CQ114-67164Cable - Exhaust fan cable - This cable runs inside the main output-side door and provides power to the three enclosure fans in the cover - It connects to a cable that comes from J7 of the I/O board - For the Scitex FB500/FB700 printer
CQ114-67170Cable - High resolution read-head interface connector - The read-head cable inserts into this connector - For the Scitex FB500/FB700 printers
CQ114-67179Cable - Interface cable - Cable that goes from the electronics assembly to the encoder interface connector - For the Scitex FB500/FB700 printers
CQ114-67194Cable - Web cam and extension cable - For the Scitex FB500/FB700 printers
CQ114-67195Cable - Interface cable - This is a 71cm (28-inch) long braided cable that connects from the rail to the media vacuum table main frame - Includes fastners - For the Scitex FB500/FB700 printers
CQ114-67196Cable - Grounding cable - This is a 320cm (126-inch) long braided cable that connects from the service side endcap to the chassis - For the Scitex FB500/FB700 printers
CQ114-67202Cable - Camera assembly - Includes cables and metal housing - For the Scitex FB500/FB700 printers
CQ114-67203Cable - Camera flex cable assembly - Replacement pair of the 46cm (18-inch) flex cables connecting the camera assembly to the headboard
CQ114-67109Carriage - Carriage drive assembly - Includes bracket, motor, drive shaft, timing belt, and all related fasteners - For the Scitex FB500/FB700 printer
CQ114-67131Caster - Table caster assembly - Includes wheel with threaded shaft, mounting bracket, black hand knob, wingnut, and related fasteners - Used on all sizes/versions of the media support
CQ114-67045Clamp - Clamp kit - Clamp parts used at rail/track attachment and at the track/carriage attachment - For the Scitex FB500/FB700 printer
CQ114-67181Cleaner - Cleaner - Includes only one unit - Chemswab for cleaning the encoder ring
CQ114-67054Control Panel - Touch-sensitive LCD control panel - For the Scitex FB500/FB700 printer
L1Q41-67084Control Panel - FrmLcdU FRONT LCD PANEL
CQ114-67065Coupler - Coupler kit - Includes eight screws and two new interlock keys - Located between the media drive motor/reducer and the media drive roller - For the Scitex FB500/FB700 printer
CQ114-67021Cover - Carriage cover - For the Scitex FB500/FB700 printer
CQ114-67114Cover - Cable cover - Box like enclosure located in the interior surface of the output side (service end corner of the frame) - For the Scitex FB500/FB700 printer
CQ114-67132Cover - Vertical leg cover - The same cover is used on both left and right sides - Used on all sizes/versions of the media support - For the Scitex FB500/FB700 printer
CQ114-67171Cover - Roll-to-roll belt cover - Sheet metal cap that covers the belt, gears, and pulleys in the roll-to-roll accessory - Loacted in the takeup motor area - For the Scitex FB500/FB700 printers
CQ114-67204Cover - Service station shift covers - Pair of metal covers that deflect ink from the service station wiper rails
CQ114-67192Door - Service access door assembly - Includes the door, window, latch, hinge, door switch, and related fasteners - Found on the service-end enclosure - For the Scitex FB500/FB700 printers
CQ114-67197Door - Output-side main center door - This is the sheet metal enclosure only - For the Scitex FB500 printer
CQ114-67198Door - Input-side main center door - This is the sheet metal enclosure only - For the Scitex FB500 printer
CH154-67012Enclosure - Window enclosure - Includes pushnuts - Replacement UV-blocking windows used only on the center output-side door - For the Scitex FB500/FB700/FB950
CQ114-00067Enclosure - Enclosure user endcap - Sheet metal enclosure only - For the Scitex FB500/FB700 printer
CQ114-00068Enclosure - Enclosure service endcap - Sheet metal enclosure only - For the Scitex FB500/FB700 printer
CQ114-00072Enclosure - Belt cover enclosure - Located on the service end, output side of the printer - For the Scitex FB500/FB700 printer
CQ114-00073Enclosure - Belt cover enclosure - Located on the user end, output side of the printer - For the Scitex FB500/FB700 printer
CQ114-00074Enclosure - Belt cover enclosure - Located on the service end, input side of the printer - For the Scitex FB500/FB700 printer
CQ114-00075Enclosure - Belt cover enclosure - Located on the service end, output side of the printer - For the Scitex FB500/FB700 printer
CQ114-67040Enclosure - OHS sheet metal enclosure - For the Scitex FB500/FB700 printer
CQ114-67088Enclosure - Service station enclosure - Includes both the foam insulation within the box and all related fasteners - Enclosure that surrounds the service station ShopVac - For the Scitex FB500/FB700 printer
CH154-67005Encoder - Encoder strip actuator assembly - Includes bracket - Used in all lifting assemblies and service station - For the Scitex FB950 printer
CH971-91407Encoder - Media drive encoder - Attaches to the belt drive motor on the service end of the printer - Does not include the high-resolution encoder - For the Scitex FB500/FB700/FB950/FB910
CH971-91425Encoder - Mylar encoder strip and foam tape - It is long enough for a 2.5m (98-inch) printer and can be trimmed down for smaller printers - Part requires you to reuse the existing aluminum bar from the old strip
CQ114-67064Encoder - High resolution encoder - This is the read-head and cable for the high-resolution encoder on the user-end of the media belt/vacuum table - For the Scitex FB500/FB700 printer
CH971-91513Fan - Fan assembly - Cools the electronics box in the printer
CH971-91596Fan - UV lamp housing cooling fan - For the Scitex FB500/FB700/FB950, and Designjet H-series printers
CH971-91599Fan - Fan assembly - Located on the top enclosure and end enclosures - For the Scitex FB500/FB700, also the Designjet H-Series
CQ114-67007Fan - Cooling fan - For the back of carriage - For the Scitex FB500/FB700 printer
CQ114-67016Filter - Overfill filter and tubing assembly - For the Scitex FB500/FB700 printer
CQ114-67028Filter - Filter media - For the cooling fans on the electronics assembly - For the Scitex FB500/FB700 printer
CQ114-67188Filter - Replacement filter - Includes media and mesh used inside the ShopVac, as well as related fasteners - For the Scitex FB500/FB700 printers
CH971-91594Glass Assembly - Quartz lamp glass - Inserts below the left or right lamp housing - For the FB500/FB700/FB950 also the Designjet H-Series
3160-4231Guard - Fan finger guard assembly - 92.2mm, 30 ppi filter - Includes fan guard with integrated filter holder - Used on the Scitex FB950/FB500/FB700 electronics box intake fan
CQ114-67205Guard - Belt edge guard - Found on the service end, inside the main cover, in line with the printing path of the carriage - Used to keep the end of the belt from ever interfering with carriage travel - For the Scitex FB500/FB700 printers
CH971-90811Hardware - Carriage drive motor - For Scitex printers Scitex Color Span Carriage Drive Motor unit.
CQ114-67014Hardware - Trolley assembly (upper and lower plates) - For the Scitex FB500/FB700 printer
CQ114-67015Hardware - Upper trolley plate with wheels - For the Scitex FB500/FB700 printer
CQ114-67024Hardware - Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly to components on the service end of the printer - Only the loom bundle is available, the individual cables are not orderable - For the Scitex FB500 printer
CQ114-67025Hardware - Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly to components on the user end of the printer excluding devices in the user-end removable enclosure - For the Scitex FB500 printer
CQ114-67026Hardware - Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly and components in the user-end removable enclosure and to the OHS board - For the Scitex FB500/FB700 printer
CQ114-67073Hardware - Float switch assembly - Includes brackets - Used in the service station - For the Scitex FB500/FB700/FB950 printer
CQ114-67085Hardware - Drain hose - Runs from the elbow fitting on the service station basin to the spigot on the printer enclosure - For the Scitex FB500/FB700 printer
CQ114-67089Hardware - ShopVac for the service station - For the Scitex FB500/FB700 printer
CQ114-67092Hardware - Light-blocking skirt - Used on the main cover - For the Scitex FB500 printer
CQ114-67096Hardware - White-ink homogenizer (shaker) assembly - Mounts on the ink rack - For the Scitex FB500/FB700 printer
CQ114-67133Hardware - Metal transition piece - Attached to the input and output tables to bridge from the table to the printer belt
CQ114-67142Hardware - Complete standard output table assembly - For the Scitex FB500 printer
CQ114-67143Hardware - Table top assembly - For the output and accessory tables - For the Scitex FB500 printer
CQ114-67158Hardware - Media collet assembly - The collet is for 3-inch cardboard cores only - This is a single media collet used on the media spools in the roll-to-roll accessory - Two collets are used per spool - For the Scitex FB500 printer
CQ114-67169Hardware - Light-trapping louvre assembly - Found in the light-blocking tray on the user end of the printer - For the Scitex FB500/FB700 printers
CQ114-67213Hardware - Complete track (Igus) assembly - Includes all tubes, cables, and related hardware - For the Scitex FB500 printers
CQ114-67159Holder - Spool holder assembly - Spool-holding puck with bearings found on the RTR accessory - Holds the media spool in place between the user-end and service-end bracket assemblies
CQ114-67017Housing - Service-side lamp housing - It does not include a bulb - For the Scitex FB500 printer
CQ114-67018Housing - User-side lamp housing - It does not include a bulb - For the Scitex FB500 printer
CQ114-67111Idler - Idler assembly - Located on the service-end of the rail - For the Scitex FB500/FB700 printer
CQ114-67156Idler - Take-up idler assembly - This is the fixed roller bar for the Scitex FB500 roll-to-roll accessory - The fixed roller remains stationary when the take-up system is operational
CQ114-67225Idler - Frm Carr_Idlr Adv U Scitex Fb700 Scitex Fb500
CQ114-67038Ink Delivery System - Ink-delivery-system (IDS) vacuum assembly (silver box) - With external white air filter - For the Scitex FB500/FB700 printer
CQ114-67106Ink System - Ink pump assembly - Includes tubing quick disconnect to box check valve and Torx fasteners for installation - For the Scitex FB500/FB700 printer
CQ114-67214Ink System - Ink tube kit - Bundle of four ink tubes (CMYK) for replacement in the ALT Igus assembly only - For the Scitex FB500 printers
CQ114-67215Ink System - Ink tube kit - Includes two ink tubes (lm-lc/white) and both air tubes (vacuum/ pressure) for replacement in the ALT Igus assembly only - For the Scitex FB500 printer
CQ114-67240Ink System - Frm,Fb500,Igus,4_Ink_Tube,Alt
CQ114-67241Ink System - Frm,Fb500,Igus,2_Ink-2_Air_Tube,Alt
CQ114-67141Input Assembly - Standard input table assembly - For the Scitex FB500 printer
CQ114-67217Kit - Hardware kit - This kit complements the Uptime Kit
CH154-67091Lamp - UV bulb/lamp - For use with Designjet H-Series and Scitex FB950/FB500/FB700 printers
CH231ALamp - UV bulb/lamp - For use with Designjet H-Series and Scitex FB950/FB500/FB700 printers
CQ114-67093Lamp - LED lamp assembly - Located in the service station area
CQ114-67086Latch - Latch mechanism - For securing the service station basin/tray to the frame mount - For the Scitex FB500/FB700 printer
CQ114-67136Latch - Table latch kit - Used to replace any single latch and/or receiver piece for connecting tables together or for connecting a table to the printer - For the Scitex FB500/FB700 printer
CQ114-67137Latch - Slam latch kit - Includes fasteners, brackets and offset plates as well as the two latches and connecting cable - For the Scitex FB500 media support tables.
CQ114-67037Module - Ink-delivery-system (IDS) vacuum accumulator module - Resembles a blue filter housing - For the Scitex FB500/FB700 printer
CH154-67008Motor - Media drive motor/reducer assembly - For the Scitex FB950/FB500/FB700 printer
CH971-54440Motor - MOTOR ASSEMBLY Only. - Drives carriage with timing belt ASSY MTR XENA/ATHENA CARRIAGE_DRVLF.
CH971-91533Motor - Service station wiper motor - Moves the wiper head in the Y axis - For the Scitex FB500/FB700/FB950, also the Designjet H-Series
CH971-91561Motor - Takeup motor and switch assembly - Used for the roll-to-roll accessory - For the Scitex FB500/FB700/FB910/FB950
CH971-62834Mount - Flush panel mount - Recessed plastic hand-hold as used in the enclosures - For the Scitex FB910/FB950/FB500/FB700
CQ114-67075Mount - Service station frame mount assembly - This is the part that stays in place on the printer chassis when the tray/basin is opened - For the Scitex FB500/FB700 printer
CH971-91405Pad - Leveling pad - For Scitex FB500/FB700/FB950/FB910 printers
CH971-91389PC Board - Motor driver board (motor control board) - Located in the electronics assembly - For the Scitex FB500/FB700/FB91O/FB950 printers
CH971-91512PC Board - Power distribution board - Routes inbound AC to the various printer power supplies - For the Scitex FB500/FB700, and the Designjet H-Series
CQ114-67030PC Board - I/O board assembly - Includes the metal bracket - For the Scitex FB500/FB700 printer
CQ114-67043PC Board - OHS circuit board - Communicates with the ink profilers and the I/O board and powers the ink pumps - For the Scitex FB500/FB700 printer
CH971-91402Pin - Alignment pin assembly - These pins are used to set position of multiple sheets - For the Scitex FB500/FB700/FB950/FB910
8120-6899Power Cord - Power Cord for DesignJet 4020, DesignJet 4520
8120-6903Power Cord - Power cord (Black) - 12 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P locking-type male plug, and IEC C19 straight female receptacle (for 250VAC in the United States, Canada, and Japan) - (Feller and Neumayer L6/20-SJT3X12AWG-C19/4.5M)
CH154-50005Power Cord - AC power cord - 4.6 meters (15 feet) long - AC power cord from the electronics assembly to the service station ShopVac - For Scitex FB500/FB700/FB950
CQ114-67034Power Cord - Power cable - Goes from the AC distribution board to the UVPS (One wire goes to the UVPS, the other wire goes to the AC relay) - For the Scitex FB500 printer
CQ114-67211Power Cord - Power cable - Long power cable that goes from the electronics board to the LCD - Includes an additional short extension, to facilitate disconnecting the cable from the LCD if the endcap needs to be completely detached from the printer
CH971-91083Power Supply - Power supply and power plug adapter kit - Needed to implement the external auxiliary power source for IDS vacuum
CH971-91507Power Supply - UV power supply - For the Scitex FB500, also used in some models of the Designjet H-Series
CQ114-67032Power Supply - Power supply unit - 24/38 VDC dual-channel power supply located in the electronics assembly - For the Scitex FB500/FB700 printer
CQ114-67070Power Supply - Power supply - For the anti-static ionizer bar, mounted to the rail - For the Scitex FB500/FB700 printer
CQ114-67100Power Supply - Electronics box power supply - 24 VDC - Located in the electronics assembly, for the IDS vacuum pump only - For the Scitex FB500/FB700 printer
CQ114-67146Power Supply - ATX power supply - 12 VDC - Used in the electronics assembly - For the Scitex FB500/FB700 printer
CH104-67002Pressure Assembly - Vacuum/pressure assembly - Pressure pump for the Ink Delivery System (IDS) - Located on the OHS assembly
CQ114-67019Printhead - Printhead - For the Scitex FB500/FB700 printer / FRM Printhead.
L1Q41-67065Printhead - Master printhead - Does not include any thermistors. For HP Scitex FB500 and FB700.
CH971-91586Relay - AC relay - Located in the main electronics box
CQ114-67005Reservoir - Carriage ink reservoir - Includes the reservior assembly, tubing, attachment plates, and associated hardware - For the Scitex FB500/FB700 printer
CQ114-67209Restraint - Repackaging kit - Includes the carriage restraint and instructions - For the Scitex FB500 printer
CQ114-67066Ring - Media encoder ring - Includes a high accuracy dial indicator required for replacement of the part - High resolution media drive encoder ring, located on the user end of the drive roller.
CQ114-67216Ring - O-ring set - Pair of the small O-rings used between the printhead and the ink barbs on the bottom of the carriage - For the Scitex FB500/FB700 printers
CQ114-67060Roller - Media idler roller - Located on the input side - For the Scitex FB500 printer
CQ114-67095Roller - Media hold-down roller - For the Scitex FB500 printer
CQ114-67134Roller - Roller table - 162.5cm (64in) x 45.7cm (18in) size - Sheet metal cover used for the standard input table only - For the Scitex FB500 printer
CQ114-67139Roller - Roller table - 162.5cm (64in) x 81.3cm (32in) size - Sheet metal cover used for the standard output table and the accesory table - For the Scitex FB500 printer
CQ114-67150Roller - Foam roller assembly - For the roll-to-roll accessory - For the Scitex FB500 printer
CH980-00076Screw - Screws PPH SEMS M4 0.7_Pitch ST 12MM_LG
CQ114-67108Screw - Rubber screws - Set of 2 rubber screws to fasten blower to blower plate in the media belt vacuum trays - For the Scitex FB500/FB700 printer
CH971-57774Sensor - Sensor flag - Home sensor flag that attaches to the rail at the service end - For the Scitex FB500/FB700/FB950 printers
CH971-91406Sensor - Media thickness sensor assembly - Calibrated in the factory - For the Scitex FB950/FB910/FB500/FB700 printer
CQ114-67009Sensor - Carriage home sensor kit - Includes mounting bracket and cable does not include the flag attached to the rail - For the Scitex FB500/FB700 printer
CQ114-67023Sensor - Optical media-out detection sensor - Located on the input side of the printer - Two are used on the printer, one at center and one at the user end - For the Scitex FB500/FB700/FB950 printer
CQ114-67074Sensor - Complete service station assembly - For the Scitex FB500/FB700/FB950 printer
CQ114-67078Sensor - Service station height sensor - A part of the wiper assembly - For the Scitex FB500/FB700 printer
CQ114-67162Sensor - Main carriage drive encoder sensor - Includes integrated cable mounting bracket and associated hardware - For the Scitex FB500/FB700 printer
L1Q41-67081Sensor - FRM CARRIADE ENCO HP SCITEX FB500 550 750 models and compatible units. From Carriage Encoder/Braket;
CQ114-00069Service Parts - Encl,Printer,Kaa,Center,Input
CQ114-00070Service Parts - Encl,Printer,Kaa,Center,Door
CQ114-60135Service Parts - Assy,Profiler,Kaa,White Ink Enable
CQ114-67059Service Parts - Frm,Fb500,Media Drv Rllr
CQ114-67076Service Station - Service station tray/basin assembly - This is the part that opens out from the printer when the clasp is released - For the Scitex FB500/FB700 printer
CQ114-67110Shaft - Carriage drive shaft - Shaft is knurled to prevent pulley from slipping on the shaft - For the Scitex FB500/FB700/FB910/FB950 printer
CQ114-67163Shield - Exhaust fan shield - Light-blocking shield for each of the enclosure fans except for the service endcap - For the Scitex FB500/FB700 printer
CQ114-67185Shield - Light-blocking shield - Used with the pair of fans in the service endcap
CQ114-67144Spring - Gas shock kit - Gas shock and associated brackets/fasteners found on the accessory tables only - For the Scitex FB500 printer
CQ114-67190Spring - Main cover gas spring - Includes only one spring - Used to hold open the main cover
8120-6895Strip - Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has a stripped end for power input and straight C19 (F) receptacle for power output
CQ114-67072Strip - Stainless-steel strips - Set of three - The carriage wheels run along the strips - Used on the rail
CQ114-67083Strip - Lifting encoder strip assembly - Includes the minimum/maximum flag assembly used in the service station - For the Scitex FB500/FB700/FB950 printer
CQ114-67129Support - Table support structure and wheels - For either of the Scitex FB500 accessory tables
CQ114-67138Support - Table support structure and wheels - For either of the Scitex FB500 accessory tables
CH971-91469Switch - On/Off switch - Located on the electronics assembly - For the Scitex FB500/FB700/FB950/FB910 printers
CQ114-67193Switch - Door switch - Switch used on the main cover and service door, the service station latch-closed detection, and the service station wiper home switch - For the Scitex FB500/FB700 printers
CQ115-67051Tape - Foam tape - 175cm (69-inch) long - Located on top of the rail that cushions the track assembly (Igus) - This length is for any 2.5m (98-inch) printer, but may be cut down to shorter lengths for use on other machines
CQ114-67160Tensioner - Supply tensioner (clutch) - The supply tensioner prevents the media supply roll from unspooling - Used in the service-end supply bracket of the roll-to-roll accessory - For the Scitex FB500/FB700 printer
CQ114-67011Thermistor - Thermistor assembly - Includes a new O-ring for the reservoir - This is an assembly of the three thermistors pre-installed into the top half of the ink reservoir - For the Scitex FB500/FB700 printer reservoir Hp Fb 500 700 550 750
CH971-55984Tool - Head height gauge tool - This go/no-go gauge is used to set the printhead height to 0.085-inches above the surface of the media
CH971-91572Tool - Belt tension tool kit - Fixture used to measure tension on the media belt - Requires a dial indicator (not included) - For the Scitex FB500/FB700/FB950/FB910
CQ114-67003Tool - Fasteners tool kit - Collection of various fasteners used in multiple locations on the printer - For the Scitex FB500/FB700 printer
CQ114-67174Tool - Torque wrench tool - With long 5mm hex key, used to remove/install the media drive motor-roller coupler
CQ114-67175Tool - Hex key (Allen wrench) tool - Suitable for accessing the printhead adjustment plate fasteners
CQ114-67176Tool - Measurement tool - Standard dial indicator suitable for both carriage sabre angle and belt tension measurement
CQ114-67177Tool - Torque screwdriver - Includes hex key bits 2, 2.5, 3, 4, 5, 6(mm), and torx T25 - Used for adjusting carriage fasteners - Accepts standard 1/4-inch bits
CQ114-67189Tool - Spacer tool - This is a service tool used to set the correct gap between the media drive high-resolution encoder read-head and the encoder ring on the drive roller
CQ114-67210Tool - Alignment tool - For RTR accessory installation
CQ114-67062Tray - Vacuum tray - With blowers and cabling used in the belt vacuum table - For the Scitex FB500 printer
CQ114-67127Tube - Tubes assembly - Two short tubes used with the headboard pressure sensor and the air manifold - For the Scitex FB500/FB700 printer
CQ114-67208Tube - Tube menders kit - Collection of plastic barbs that are used to join the ends of tubes (ink tubes, air vacuum tube, and air pressure tubes) together
CQ114-67113Wheel - Wheel assembly - Includes the fasteners for attachment to printer - Used for moving the printer four wheels are used per printer
CQ114-67090Window - UV-blocking input side windows - Includes pushnuts for attachment to enclosure - For the Scitex FB500/FB700 printer
Repair It
Exchange It
View Supplies
Service Manual