HP parts list for L2526A HP photosmart c8180 all-in-one printer
L2526A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
CB057-60070AC Adapter - Power module - Input voltage 100-240VAC 50-60Hz - Output voltage 32VDC 1.56mA 50 watt - Requires separate AC power cord (Worldwide)
L2526A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
L2526A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
0957-2230Adapter - PS PWR-SPLY-AC-DC ADAPTER;50W ROHS Power Adapter AC-to-DC PWR-SPLY-AC-DC ADAPTER;50W ROHS Power module - Input voltage 100-240VAC 50/60Hz - Output voltage 32VDC 1.56A 50 watts - Requires separate 3-wire AC power cord with C-14 connector.
L2526A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
L2526A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
L2526A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
L2526A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
L2526A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
L2526A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
L2526A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
L2526A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
L2526A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
L2526A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
L2526A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
L2526A-Arm_PickupArm Pick Up - Paper detection arm - for registration plate on picking up paper
L2526A-Arm_PlateArm Plate - Lever arm - used to lift the pressure plate lifter
L2526A-Arm_SensingArm Sensing - Arm assembly senses paper in bottom tray
L2526A-Arm_TensionArm Tension - Tension arm - maintains tension on carriage belt
L2526A-Belt_ADFBelt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit
L2526A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
L2526A-Belt_DuplexBelt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
L2526A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
L2526A-Belt_ScannerBelt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
L2523-60033Bezel - Bezel assembly - Plastic cover over the control panel
L2523-60089Bezel - CD/DVD drive bay bezel - For the Photosmart C8180 All-in-One printer series
L2523-60107Bezel - Front faceplate (bezel) assembly - For the Photosmart C8180 All-in-One printer series (French)
L2523-60110Bezel - Front faceplate (bezel) assembly - For the Photosmart C8180 All-in-One printer series (English and Traditional Chinese)
L2526A-BezelBezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
L2526A-Bracket_LeftBracket Left - Left bracket - carriage rod adjustment bracket (left)
L2526A-Bracket_RightBracket Right - Right bracket - carriage rod adjustment bracket (right)
L2526A-Bracket_TensionBracket Tension - Belt tension bracket - holds the carriage belt idler pulley
8121-0789Cable - USB interface cable - Type 'A' connector to type 'B' connector - 2m (6.5ft) long
8121-0868Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
L2523-60017Cable - Scanner motor cable - Connects ECU to scanner motor
Q6264ACable - Hi-speed USB interface cable - Type 'A' connector to type 'B' connector - 1.8m (6ft)
Q8180-60007Cable - Carriage assembly flex cable for PhotoSmart C62XX Series, PhotoSmart C81X0 Series, PhotoSmart C51XX Series
L2526A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
L2526A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
L2526A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
L2526A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
L2526A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
L2526A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
L2526A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
UG606ECare Pack - HP 2 year Care Pack w/Next Day Exchange for Printers
UG609ECare Pack - HP 3 year Care Pack w/Next Day Exchange for Printers
UH610ECare Pack - HP 4 year Care Pack w/Next Day Exchange for Printers
US284ECare Pack - HP Basic Installation Service for one consumer printer with wireless capability
US285ECare Pack - HP Premium Installation Service with wireless network setup for up to three PCs and/or printers
C9087-60020Carriage - Carriage assembly - Holds and positions print cartridges
L2526A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
L2526A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
L2526A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
L2526A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
L2526A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
L2526A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
L2526A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
L2526A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
L2526A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
L2523-40014Chassis - Midchassis - For the Photosmart C8180 All-in-One printer series
L2526A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
Q6260ACleaner - Cleaning Kit - For InkJet printers and All-in-Ones - Kit includes Pouch, 10 swabs, 10 dry cloths, 5 pre-moistened cloths, 20ml bottle of cleaning solution, and user guide
L2526A-Clutch_ADFClutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder
L2526A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
L2523-60025Control Panel - Control panel assembly - Enables user interaction and communication with printer
L2526A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
L2523-60087Cover - Document cover - Plastic lid that covers scanner glass
L2526A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
L2526A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
L2526A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
L2526A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
L2526A-DisplayDisplay - Status led display (LCD display assembly).
Q8180-60008Door - Cleanout assembly door - Rear access door that provides access to paper jams
L2526A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
L2526A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
L2526A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
L2523-10002Drive Assembly - 8X max CD-R/CD-RW optical disk drive - With LightScribe
L2523-60073Drive Assembly - 8X max DVD�R/RW optical disk drive - With LightScribe
L2523-61001Drive Assembly - Optical drive replacement kit - For the Photosmart C8180 All-in-One printer series
L2526A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
L2526A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
Q5582ADuplexer - Two-sided printing accessory (duplexer) - For Photosmart 3200, 3300, 8250, C5100, C6100, C7100 series printers - Includes user guide
C8980-80048Encoder - Encoder for PhotoSmart C62XX Series, PhotoSmart C81X0 Series, PhotoSmart C51XX Series
C8980-80079Encoder - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
L2526A-EncoderEncoder - Encoder spring - provides tension for encoder strip
L2526A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
L2526A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
L2526A-Extender_ADFExtender ADF - Paper extension for the automatic document feeder (ADF) input tray
L2526A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
L2526A-Feed_RollersFeed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
L2526A-Feed_Rollers_ADFFeed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.
L2526A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
L2526A-FormatterFormatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
L2526A-Front_PanelFront Panel - Front panel assembly - includes lcd and actuator buttons
L2526A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
L2526A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
L2526A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
L2526A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
L2526A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
L2526A-Hinge_CvrHinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.
L2523-60037Holder - PS C8180 Slide Negative Holder Assembly / Slide and negative film holder assembly - For the Photosmart C8180 All-in-One printer series.
L2526A-HolderHolder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
L2526A-IdlerIdler - Scanner belt idler assembly - maintains scannter belt tension.
L2523-60121Ink Delivery System - Ink delivery system - Carries ink from ink supply station to ink cartridges
L2526A-Ink_DLVRYInk Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
L2523-90106Manual - Setup guide - For the Photosmart C8180 All-in-One printer series (English and Spanish)
L2523-90107Manual - Setup guide - For the Photosmart C8180 All-in-One printer series (English and French)
L2523-90108Manual - Setup guide - For the Photosmart C8180 All-in-One printer series (English, Spanish, and Portuguese)
L2523-90117Manual - Setup guide - For the Photosmart C8180 All-in-One printer series (English and Traditional Chinese)
L2523-90121Manual - Basics guide - For the Photosmart C8180 All-in-One printer series (English and French)
L2523-90122Manual - Basics guide - For the Photosmart C8180 All-in-One printer series (Spanish)
L2523-90124Manual - Basics guide - For the Photosmart C8180 All-in-One printer series (Portuguese)
L2523-90141Manual - Basics guide - For the Photosmart C8180 All-in-One printer series (English)
L2523-90142Manual - Basics guide - For the Photosmart C8180 All-in-One printer series (English and Traditional Chinese)
L2523-90144Manual - Basics guide - For the Photosmart C8180 All-in-One printer series (Korean)
L2523-90149Manual - Setup guide - For the Photosmart C8180 All-in-One printer series (Korean)
L2526A-Motor_ADFMotor ADF - ADF motor unit - drives ADF rollers on the feeder assembly
L2526A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
L2526A-Motor_ScannerMotor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
L2526A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
L2523-40016Multifunction - Rear case assembly - For the Photosmart C8180 All-in-One printer series
L2523-40018Multifunction - Left side case assembly - For the Photosmart C8180 All-in-One printer series
L2526A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
L2523-60070Pad - Ps c8180 carrier white background assembly Document backing - White backing material that is attached to the underside of the document lid - Provides white background for scanned material
L2526A-Pad_ADFPad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
L2526A-Pad_TrayPad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
51634YPaper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
C7890-60004Paper - Media starter kit - Includes five sheets of 10cm (4in) x 15cm (6in) HP Advanced photo paper
C7891-60007Paper - Media starter kit - Includes five sheets of 10cm (4in) x 15cm (6in) HP Advanced photo paper
Q5458APaper - Paper (Glossy) for DeskJet 300, DeskJet 640 Series, Designjet 30gp, DesignJet 130 Series
Q6568APaper - Paper (Glossy) for DeskJet 660 Series, DeskJet 300, DesignJet 1055 Series, DeskJet 5550 Series
Q6569APaper - Premium Plus Soft-Gloss Photo Paper (Matte) - A size (8.5 x 11-inches) - 25 sheets (North America)
Q7853APaper - Paper (Glossy) for Business Inkjet 1200 Series, OfficeJet Pro K550 Series, Business Inkjet 2800 Series, DeskJet 9800
L2526A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
L2526A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
L2526A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
L2526A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
L2523-60021Plotter - Right side case assembly - For the Photosmart C8180 All-in-One printer series
Q3093-40033Plug - RJ45 Plug - Inserted into the RJ45 socket when not in use (For use in Europe)
8121-0889Power Cord - Power cord (Black) - 2-wire, 18 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For 120V in North America, Opt. 953)
8121-0891Power Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For 240V in China)
8121-0892Power Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (Opt. 952)
8121-0893Power Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For 240V in UK, Singapore, Malaysia, and Hong Kong, Opt. 955)
8121-0895Power Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Europe, Opt. 954)
8121-0897Power Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Korea, Opt. 958)
8121-0969Power Cord - Power cord (Black) - 2-wire, 18 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (USA and Canada, Opt. 953)
8121-1055Power Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Japan)
L2526A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
L2526A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
L2526A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
L2526A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
C8770APrint Mechanism - Print Head Printhead 006L2 for HP photosmart C6180 C7280 C8180 for HP Printer use for HP 02 Ink
L2526A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
L2526A-PulleyPulley - Paper pick up tray motor pulley.
L2523-90008Reference - Optical drive replacement instructions - For the Photosmart C8180 All-in-One printer series
L2526A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
L2526A-Rod_CarriageRod Carriage - Carriage rod - shaft that the carriage assembly rides on
L2526A-Rod_ScannerRod Scanner - Scanner rod - shaft that the scanner assembly rides on
L2526A-Roller_ADFRoller ADF - Feeder ADF roller for picking up paper from ADF unit.
L2526A-Roller_PickupRoller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
L2526A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
Q8253-60003Scanner - Scanner assembly - For the Photosmart C8180 All-in-One printer series
L2526A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
L2526A-Scanner_BeltScanner Belt - Scanner belt attaches from the scanner to the scanner motor.
L2526A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
L2526A-Scanner_UnitScanner Unit - Scanner unit includes the entire scanner base but not the ADF portion.
L2526A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
L2526A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
L2526A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
L2526A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
L2526A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C9087-60023Service Station - Service station assembly - For conditioning the ink cartridges when the carriage is in its home position
L2526A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
L2526A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
L2526A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
L2526A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
L2526A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C8980-00029Spring - Spring for PhotoSmart C62XX Series, PhotoSmart C81X0 Series, PhotoSmart C51XX Series
L2526A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
CC564-60047Stop - Paper output tray extension stop - Stops the paper as it exits the printer
L2526A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
CC247-60043Tray - Output paper tray - Collects printed paper
Q7057-00009Tray - Output tray - Surface where the printed film is collected
Q7057-40034Tray - Output paper tray - Collects printed paper
Q7057-60003Tray - Upper photo paper tray - For Photosmart All-in-One printers
Q7057-60005Tray - Input tray assembly - Holds paper supply for printer
Q7057-60006Tray - ASSY-TRAY-LOWER, Lower photo paper tray - For Photosmart All-in-One printers
L2526A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
L2526A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
L2526A-Tray_BaseTray Base - Tray base- bottom base of the paper input tray.