HP parts list for Q8134A HP DeskJet F380 All-In-One Printer
C8974-80013Absorber - Bottom absorber - Absorbs excess ink during the cleaning process
C8974-80014Absorber - Absorber - Located on the left paper path
C8974-80015Absorber - Absorber - Located on the right paper path
C8974-80016Absorber - Color ink absorber - Absorbs excess color ink during the cleaning process
C8974-80024Absorber - Black ink absorber - Absorbs excess ink from black cartridges
Q8134A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
Q8134A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
Q8134A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
Q8134A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
8121-0868Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
Q8134A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
Q8134A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
Q8134A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
Q8134A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
Q8134A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
Q8134A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
Q8134A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
US284ECare Pack - HP Basic Installation Service for one consumer printer with wireless capability
US285ECare Pack - HP Premium Installation Service with wireless network setup for up to three PCs and/or printers
Q8130-60005Carriage - Carriage assembly - Holds and positions print cartridges
Q8134A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
Q8134A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
Q8134A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
Q8134A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
Q8134A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
Q8134A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
Q8134A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
Q8134A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C9351ANCartridge - 21 Black InkJet Print Cartridge - 5ml - Prints approximately 150 pages (North America)
C9352ANCartridge - 22 Tricolor InkJet Cartridge - 5ml - Prints approximately 165 color graphics pages (North America)
Q8134A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
Q8134A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
Q8130-60001Control Panel - Control panel assembly - Does NOT include the language specific overlay
Q8134A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
Q8130-60003Cover - Document Lid assembly - Covers scanner
Q8134A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
Q8134A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
Q8134A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
Q8134A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
Q8134A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
Q8134A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
Q8134A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
Q8134A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
Q3434-60031Platen - Platen assembly - Provides printing surface for the carriage assembly
8121-1011Power Cord - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (Denmark)
8121-1014Power Cord - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (Brazil, Thailand, and Philippines)
8121-1015Power Cord - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (Europe)
8121-1017Power Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For 240V in UK, Singapore, Malaysia, and Hong Kong, Opt. 955)
8121-1021Power Cord - AC power cord (Black) - 3-conductor, 0.5m (19.6in) long (Argentina)
8121-1022Power Cord - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (Switzerland)
8121-1023Power Cord - AC power cord (Black) - 3-conductor, 0.5m (19.6in) long
8121-1028Power Cord - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (for South Africa and Bhutan)
8121-1032Power Cord - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (Israel)
Q8134A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
0957-2119Power Module - Power module (universal / worldwide) - Input voltage 100-240VAC, 50/60Hz, 600mA - Output voltage 15/32VDC, 20W - Requires a separate, detachable AC power cord with C13 connector
0957-2146Power Module - Power module - 90-264VAC input, 47/63Hz - 32VDC output, 40W - Has a 3-pin C6 (male) connector for AC input - Requires a power cord with a 3-pin C5 (female) output connector
Q8134A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
Q8134A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
Q8134A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
Q8134A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
Q8134A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C9050-60008Retainer - Trailing felx and retainer assembly - Routes flex cable between the carriage and the head driver PCA
Q8134A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
Q8134A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C8974-40046Separator - Separation pad for HP DeskJet F4180 Series
Q8134A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
Q8134A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
Q8134A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position