| Part |
Picture |
Description |
| RM1-5697-000CN |
Power on/off switch assembly |
| RM1-5698-000CN |
Control panel assembly - Control buttons and display located on top of the printer |
| RM1-5700-000CN |
Toner sensor holder assembly |
| RM1-5705-000CN |
Rear pre-exposure PC board assembly |
| RM1-5714-000CN |
Fusing connecting cable assembly |
| RM1-5718-000CN |
Interlock switch (SW3) cable assembly |
| RM1-5719-000CN |
Connecting cable assembly - Connects the 24V interlock switch (SW3) with the low voltage power suply (LVPS)PCA |
| RM1-5721-000CN |
Rear cable assembly - Connects the DC controller board with the upper high voltage power supply |
| RM1-5723-000CN |
Front cable assembly - Connects the fuser functions with the DC controller PCA |
| RM1-5724-000CN |
High voltage power supply cable assembly |
| RM1-5730-000CN |
Duplexing unit cable assembly |
| RM1-5731-000CN |
Pick-up motor (M13) cable assembly |
| RM1-5732-000CN |
5V interlock door switch (SW2) assembly |
| RM1-5737-000CN |
Multipurpose/tray 1 sensor cable assembly - For duplex models only |
| RM1-5740-000CN |
Sensor cable assembly |
| RM1-5741-000CN |
Sensor cable assembly |
| RM1-5742-000CN |
Lifter cable assembly |
| RM1-5743-000CN |
Control panel cable assembly |
| RM1-5743-020CN |
control panel cable Assy |
| RM1-5746-000CN |
Cartridge fan (FM2) cable assembly |
| RM1-5749-000CN |
Connecting cable assembly |
| RM1-5750-000CN |
Present sensor cable assembly - For the multi-purpose/tray 1 (simplex models only) |
| RM1-5752-000CN |
Motor/sensor cable assembly |
| RM1-5758-000CN |
DC controller PCA assembly |
| RM1-5758-060CN |
Assembly DC Controller PCB |
| RM1-5763-000CN |
Low voltage power supply PCA assembly - For 110 VAC |
| RM1-5763-010CN |
LV Power Supply PCB Assy |
| RM1-5764-000CN |
Low voltage power supply PCA assembly - For 220 VAC operation |
| RM1-5764-010CN |
L.V. Power Supply Pcb Assy, 220v |
| RM1-5771-000CN |
Toner remain PCA assembly |
| RM1-5773-000CN |
Paper pick-up motor (M13) assembly |
| RM1-5776-000CN |
Main DC Motor assymotor M3-M6 - CLJ CP4025 / CP4525 / CM4540 / M651 / M680 series |
| RM1-5777-000CN |
ITB motor (M1) assembly - Drives the ITB and residual toner feed screw |
| RM1-5778-000CN |
Fuser motor (M2) assembly - Drives the fuser sleeve, pressure roller, fuser pressure roller, and primary transfer roller disengagement - CLJ CM3530 / CP3525 / CP4525 / CP4025 / CM4540 / M575 / M551 series |
| RM1-5779-000CN |
Lower high voltage power supply PCB assembly - Includes FFC DCC to high voltage power supply cables |
| RM1-5781-000CN |
Upper high voltage power supply PCB assembly |
| RM1-5785-000CN |
DC controller PCA assembly |
| RM1-5785-050CN |
Assy-Dc Controller Pcb |
| RM1-5786-000CN |
Control panel assembly - Control buttons and display located on the right front upper part of the printer |
| RM1-5799-000CN |
Connecting cable assembly - Connects the developing disengagement motor connector (J38), laser driver PCA connector (J72), developing disengagement sensor connector (J87) to the DC controller PC board and the high-voltage power supply PC board |
| RM1-5800-000CN |
Primary-transfer-roller disengagement sensor - For the 3 x 500-sheet paper tray 5 feeder only |
| RM1-5801-000CN |
Lower main cable assembly |
| RM1-5803-000CN |
Duplexing cable assembly - Connects to the reverse motor, duplex reverse solenoid and the upper high voltage power supply PCB |
| RM1-5804-000CN |
Feed cable assembly - Connects the pick-up motor drive assembly to the DC controller PCB |
| RM1-5807-000CN |
Switch cable assembly - Connects the (J43) right door switch to the connector (J147) on the DC controller PCB |
| RM1-5811-000CN |
Control panel cable assembly |
| RM1-5812-000CN |
Connecting cable assembly - Connects the duplex pick-up sensor connector (J74), density detect assembly (J83), multipurpose-tray pick-up solenoid (J52), and the media sensor intermediate connector (J77) to the DC controller PC board |
| RM1-5814-000CN |
Control panel cable assembly |
| RM1-5815-000CN |
Sensor cable assembly - Tray media feed sensor |
| RM1-5816-000CN |
Interlock switch cable assembly - Connects the 5 V laser and 24 V interlock switches (SW1) and (SW2) and the power switch (SW3) with the power supply unit and the DC controller PC board |
| RM1-5821-000CN |
Cooling fan - Provides air to the cartridge area |
| RM1-5825-000CN |
Sub PS AD cable assembly |
| RM1-5826-000CN |
DC Sub-controller cable assembly |
| RM1-5827-000CN |
DC cable assembly |
| RM1-5832-000CN |
Interlock switch cable assembly - For switches (SW1) and (SW2) |
| RM1-5839-000CN |
1x500-sheet paper feeder driver PC Board |
| RM1-5853-000CN |
Paper sensor PCA assembly - Cassette paper pick-up sensor - Connects to the DC controller PCA |
| RM1-5854-000CN |
1 x 500-sheet paper feeder PCA assembly |
| RM1-5894-000CN |
Bin sensor PCA - For the Stapler stacker multi-bin mailbox |
| RM1-5896-000CN |
Stapling mailbox bin solenoid (SL3) assembly |
| RM1-5913-000CN |
Lifter base assembly |
| RM1-5914-000CN |
Lifter assembly - One required for each cassette |
| RM1-5919-000CN |
Paper pick-up assembly - For the 1x500-sheet paper cassette feeder |
| RM1-5928-000CN |
500-sheet paper input tray cassette - Pull out cassette that the paper is loaded into - Use as the 2, 3, 4, and 5 paper input tray cassette |
| RM1-5929-000CN |
Paper pick-up assembly - For the 1 x 500-sheet paper tray assembly |
| RM1-5929-030CN |
Paper pick-up assembly - For the 1 x 500-sheet paper tray assembly |
| RM1-5931-000CN |
Cassette right rail assembly |
| RM1-5932-000CN |
Cassette left rail assembly |
| RM1-5934-000CN |
1 X 500-sheet paper feeder pick-up drive assembly |
| RM1-5935-000CN |
3 X 500-sheet paper feeder pick-up drive assembly |
| RM1-5936-000CN |
1 X 500-sheet paper feeder right door assembly |
| RM1-5937-000CN |
3 X 500-sheet paper feeder right door assembly |
| RM1-5941-000CN |
Paper pick-up drive assembly - For the 1x500 sheet feeder assembly |
| RM1-5942-000CN |
Paper pick-up drive assembly - For the 3x500 sheet feeder assembly |
| RM1-5949-000CN |
Lower duplexing tray assembly - Attaches to the paper delivery cover |
| RM1-5950-000CN |
Fuser fan cover assembly - Plastic cover located next to the rear cover assembly |
| RM1-5953-000CN |
Front internal small cover assembly - Located on the upper right side of the front door assembly |
| RM1-5958-000CN |
3 x 500-sheet paper feeder PCA assembly |
| RM1-5990-000CN |
Upper cartridge guide assembly |
| RM1-6002-000CN |
Registration sensor assembly |
| RM1-6005-000CN |
Duplex reverse drive assembly - Used for duplex models only |
| RM1-6007-000CN |
Right door assembly - For used with duplex models only |
| RM1-6007-360CN |
Right Door Assy duplex |
| rm1-6010-000cn |
Separation Roller assembly tray 2 |
| RM1-6012-000CN |
Waste toner cover assembly |
| RM1-6018-000CN |
Intermediate transfer belt (ITB) guide rail assembly |
| RM1-6019-000CN |
Intermediate transfer belt (ITB) guide rail assembly |
| RM1-6035-000CN |
Paper Tray pick up roller assembly. |
| RM1-6036-000CN |
Auto-close assembly |
| RM1-6037-000CN |
Intermediate transfer belt (ITB) guide rail (R1) assembly |
| RM1-6039-000CN |
Lifter drive assembly |
| RM1-6040-000CN |
Toner feed assembly |
| RM1-6040-010CN |
Toner feed assembly |
| RM1-6043-000CN |
Multi-porpuse/tray 1 lifter plate assembly |
| RM1-6045-000CN |
Multi-purpose/tray 1 assembly |
| RM1-6065-000CN |
Formatter board metal case |
| RM1-6066-000CN |
Formatter metal case cover |
| RM1-6074-000CN |
Fussing motor (M4) assembly - Drives the fuser pressure and delivery rollers, pressurizes and depressurizes the pressure roller, and engages and disengages the primary transfer roller |
| RM1-6075-000CN |
Fuser motor (M4) - Pressurizes and depressurizes the pressure roller and engages and disengages the primary transfer roller |
| RM1-6076-000CN |
Drive Assembly for HP Color LaserJet Professional CP5225 Printer |
| RM1-6076-020CN |
Assy-Fixing Drive |
| RM1-6088-000CN |
DC motor assembly - Includes motors (M1, M2, M3) |
| RM1-6089-000CN |
Main drive motor assembly |
| RM1-6104-000CN |
Right door assembly - Pull-down access door - Use for duplex model only |
| RM1-6104-570CN |
Right door assy |
| RM1-6105-000CN |
Paper pick-up assembly - For duplex models only |
| RM1-6105-060CN |
Pickup Assembly for HP Color LaserJet Professional CP5225 Printer |
| RM1-6105-070CN |
Paper Pick Up Assy |
| RM1-6106-000CN |
Paper pick-up assembly - For simplex models only |
| RM1-6106-060CN |
Pickup Assembly for HP Color LaserJet Professional CP5225 Printer |
| RM1-6106-080CN |
Paper Pick Up Assy |
