Part |
Picture |
Description |
RG5-6151-000CN |
Delivery cover assembly - Left side cover of Delivery Feed assembly - Includes both fans - FM1 and FM6 |
RG5-6151-060CN |
Delivery cover assembly - Left side cover of Delivery Feed assembly - Includes both fans - FM1 and FM6 |
RG5-6152-000CN |
Delivery sensor assembly - Upper left paper output sensor assembly |
RG5-6152-050CN |
Delivery sensor assembly - Upper left paper output sensor assembly |
RG5-6153-000CN |
Humidity sensor assembly - Located between the two fans on upper right side of printer |
RG5-6153-030CN |
Humidity sensor assembly - Located between the two fans on upper right side of printer |
RG5-6159-000CN |
Rear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover |
RG5-6159-030CN |
Rear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover |
RG5-6178-030CN |
Transfer roller assembly |
RG5-6178-060CN |
Transfer roller - Primary transfer roller assembly |
RG5-6179-030CN |
Secondary Transfer assembly - Complete assembly - Transfer roller assembly at bottom of ITB assembly - T2 |
RG5-6179-060CN |
Transfer assembly - Secondary transfer assembly - Transfer assembly at bottom of ITB assembly - T2 transfer assembly |
RG5-6180-140CN |
Intermediate transfer belt assembly (ITB) |
RG5-6180-190CN |
Intermediate transfer belt assembly (ITB) |
RG5-6181-000CN |
Laser scanner assembly - Separate scanners used for each color tonner cartridge (four used) |
RG5-6181-050CN |
Laser scanner assembly - Separate scanners used for each color tonner cartridge - Four used |
RG5-6182-000CN |
Print image drum door - Door on front that covers all four print image drum cartridges |
RG5-6185-000CN |
Access door strut - Attached to right side of diverter door assembly |
RG5-6188-000CN |
Process cartridge drive assembly - Includes all eight developing and drum motors |
RG5-6188-090CN |
Process cartridge drive assembly - Includes all eight developing and drum motors |
RG5-6190-000CN |
Delivery feed assembly - Moves paper to the output tray after the Fuser Assembly - Mounts on the left side of print engine frame assembly |
RG5-6191-000CN |
Delivery cover assembly - Mounts on the upper left side of the print engine frame assembly |
RG5-6191-050CN |
Delivery cover assembly - Mounts on the upper left side of the print engine frame assembly |
RG5-6192-000CN |
Pin holder unit - Low voltage connector for the Intermediate Transfer Belt (ITB) assembly - Provides connection to the fan and thermistor inside the ITB assembly |
RG5-6192-020CN |
Pin holder unit - Low voltage connector for the Intermediate Transfer Belt (ITB) assembly - Provides connection to the fan and thermistor inside the ITB assembly |
RG5-6196-000CN |
Paper pickup assembly - Includes both pickup motors - No lower level parts available for this assembly |
RG5-6196-100CN |
Paper pickup assembly - Includes both pickup motors - No lower level parts available for this assembly |
RG5-6196-110CN |
Paper pick-up assy. |
RG5-6200-000CN |
DC Controller board kit - Includes DC Controller board, video board cable and video flat cable |
RG5-6200-03ACN |
Video board cable - Cable between main power supply and video controller PC Board |
RG5-6200-050CN |
Video board cable - Cable between main power supply and video controller PC Board |
RG5-6206-020CN |
Switch assembly - Custom/standard paper switch |
RG5-6206-030CN |
Switch assembly - Custom/standard paper switch |
RG5-6207-040CN |
Paper size sensing assembly |
RG5-6207-060CN |
Paper size sensing assembly |
RG5-6208-150CN |
Paper Input Unit (PIU) - PAPER PICK-UP ASSY.Paper pick-up assembly - For paper input tray 4 |
RG5-6208-180CN |
Paper Input Unit (PIU) - PAPER PICK-UP ASSY.Paper pick-up assembly - For paper input tray 4 |
RG5-6212-300CN |
2,000-sheet paper cassette tray (Tray 4) - Part number is for the paper tray ONLY |
RG5-6212-320CN |
2,000-sheet paper cassette tray (Tray 4) - Part number is for the paper tray ONLY |
RG5-6225-070CN |
Vertical registration assembly - For tray 4 |
RG5-6225-100CN |
Vertical registration assembly - For tray 4 |
RG5-6227-000CN |
Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine |
RG5-6227-040CN |
Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine |
RG5-6227-050CN |
Assy-Paper Path Connection |
RG5-6228-040CN |
2000-sheet feeder drive assembly |
RG5-6228-060CN |
Feed drive assembly - Includes the drive motor (M303), support bracket, and the four drive gears - Mounts in the 2,000-sheet paper feeder assembly |
RG5-6229-030CN |
Paper volume sensing assembly |
RG5-6229-040CN |
Paper volume sensing assembly |
RG5-6235-140CN |
Controller PC board - Tray 4 deck controller board - Controller PC Board - for 2000 sheet feeder - Uses data from volume and size PC boards to control paper tray |
RG5-6235-150CN |
Controller PC board |
RG5-6236-000CN |
Registration sensor board - Mounts on the sensor/feed shaft holder in the paper pickup and feed assembly |
RG5-6236-020CN |
Registration sensor board - Mounts on the sensor/feed shaft holder in the paper pickup and feed assembly |
RG5-6237-000CN |
Paper volume sensor board |
RG5-6237-020CN |
Paper volume sensor board |
RG5-6238-000CN |
Paper size PC board |
RG5-6238-020CN |
Paper size PC board |
RG5-6239-000CN |
LED board - Small PC board with two LEDs and a connector - For indicating the operating status |
RG5-6239-020CN |
LED board - Small PC board with two LEDs and a connector - For indicating the operating status |
RG5-6240-000CN |
Jetlink connector socket and cable |
RG5-6240-020CN |
Jetlink connector socket and cable |
RG5-6249-000CN |
Jetlink connector grounding cable |
RG5-6250-000CN |
Power supply assembly |
RG5-6250-040CN |
Power supply assembly |
RG5-6257-000CN |
Scanner controller ribbon cables (two cable set) - Interconnects the flatbed intermediate PC board (J504 and 502) to the scanner control PC board (J103 and J105) - Mounts towards the front of the scanner assembly |
RG5-6258-000CN |
Sensor crossmember assembly - Includes the Black plastic housing, document sensor (PS1), number 1 and 2 document size sensors (PS2 and PS3), home position detector sensor (PS5), and cable assembly - Mounts in the bottom right of the scanner assembly |
RG5-6258-040CN |
Sensor crossmember assembly - Includes the Black plastic housing, document sensor (PS1), number 1 and 2 document size sensors (PS2 and PS3), home position detector sensor (PS5), and cable assembly - Mounts in the bottom right of the scanner assembly |
RG5-6259-000CN |
Sensor assembly - Includes the support plate, number 3 document size sensor (PS4) and cable assembly - Mounts in the bottom of the scanner assembly toward the middle |
RG5-6260-000CN |
ADF intermediate PCB case assembly |
RG5-6260-020CN |
ADF intermediate PCB case assembly |
RG5-6263-000CN |
Flatbed scanner optical assembly - Includes the support structure, lamp assembly, charge-coupled devices (CCD) and lens assembly, flatbed analog board, drive belt, and cables - Scans and digitizes documents placed on the flatbed scanner |
RG5-6263-070CN |
Flatbed scanner optical assembly - Includes the support structure, lamp assembly, charge-coupled devices (CCD) and lens assembly, flatbed analog board, drive belt, and cables - Scans and digitizes documents placed on the flatbed scanner |
RG5-6266-000CN |
Lower delivery roller assembly - Includes the support bracket with metal plate and screw - Mounts on the left end of the scanner assembly (Does not include rollers RB2-7884-000CN) |
RG5-6266-030CN |
Lower delivery roller assembly - Includes the support bracket with metal plate and screw - Mounts on the left end of the scanner assembly (Does not include rollers RB2-7884-000CN) |
RG5-6272-000CN |
ADF base cover assembly - Bottom half of ADF assembly that sits on top of flatbed scanner |
RG5-6272-050CN |
ADF base cover assembly - Includes the large bottom rectangular support cover for the ADF assembly with front and rear tray guides, the ADF intermediate PC board, cables, sensors, and hinges |
RG5-6274-000CN |
ADF media width sensor assembly (includes the white sensor gear that mates with the rack gear) - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly (behind the copyboard cover assembly) |
RG5-6275-000CN |
Paper pickup assembly - Includes the pickup structure pieces, motors, gears, belts, rollers and sloenoid (Does NOT include the ADF main assembly) - Mounts on top of the ADF base assembly towards the left end |
RG5-6275-060CN |
Paper pickup assembly - Includes the pickup structure pieces, motors, gears, belts, rollers and sloenoid (Does NOT include the ADF main assembly) - Mounts on top of the ADF base assembly towards the left end |
RG5-6277-000CN |
Lower registration roller assembly - Includes a steel shaft with four gray rollers and a drive gear - Mounts in the lower center of the ADF paper pickup assembly |
RG5-6281-000CN |
Feed roller assembly - Includes a steel shaft with five rubber rollers, two bushings, a spring, and E clips - Mounts to the left of the paper pickup roller in the bottom of the ADF paper pickup assembly |
RG5-6281-020CN |
Feed roller assembly - Includes a steel shaft with five rubber rollers, two bushings, a spring, and 'E' clips - Mounts to the left of the paper pickup roller in the bottom of the ADF paper pickup assembly |
RG5-6283-000CN |
Pickup roller assembly - Includes a steel shaft with a rubber D shaped roller, drive gear, bushings, sesnor flag, and two retaining clips - Mounts in the bottom of the ADF paper pickup assembly |
RG5-6283-020CN |
Pickup roller assembly - Includes a steel shaft with a rubber 'D' shaped roller, drive gear, bushings, sensor flag, and two retaining clips - Mounts in the bottom of the ADF paper pickup assembly |
RG5-6285-000CN |
Photo-sensor assembly - Includes the sensor and mounting bracket - Paper pickup roller home position sensor - Activated by the sensor flag on the pickup roller assembly - Mounts on the front frame of the ADF paper pickup assembly |
RG5-6285-020CN |
Photo-sensor assembly - Includes the sensor and mounting bracket - Paper pickup roller home position sensor - Activated by the sensor flag on the pickup roller assembly - Mounts on the front frame of the ADF paper pickup assembly |
RG5-6286-000CN |
Shutter assembly - Long Black plastic shaft with two curved finger-like tangs - Acts as a paper stop and helps align paper entering the ADF assembly - Mounts just to the right of the paper pickup roller in the ADF paper pickup assembly |
RG5-6289-000CN |
24VDC solenoid assembly - Includes the solenoid and lever arm |
RG5-6289-020CN |
Solenoid (24 VDC) assembly - Includes the solenoid and lever arm |
RG5-6290-000CN |
Sensor flag - Sensor activator half of the sensor flag for detecting when the ADF input tray is empty - Flag part passes through the 'empty tray' photo-sensor |
RG5-6298-000CN |
Weight plate assembly - Solenoid activated plate assembly that drops down during the paper pickup process and pushes against the paper stack on the pickup rollers - Mounts in the ADF paper pickup assembly |
RG5-6304-000CN |
Upper registration roller guide assembly - Includes the steel shaft with four White rollers mounted in a support frame - Mounts in the lower center of the ADF main assembly |
RG5-6304-040CN |
Upper registration roller guide assembly - Includes the steel shaft with four White rollers mounted in a support frame - Mounts in the lower center of the ADF main assembly |
RG5-6305-000CN |
Registration flag and sensor holder assembly - Activates the document registration sensor on the sensor board on top of the registration guide assembly in the ADF main assembly |
RG5-6306-000CN |
Timing flag and sensor holder assembly - Activates the two document skew detection sensors and the timing detection sensor on the sensor board on top of the registration guide assembly in the ADF main assembly (three used) |
RG5-6306-020CN |
Timing flag and sensor holder assembly - Activates the two document skew detection sensors and the timing detection sensor on the sensor board on top of the registration guide assembly in the ADF main assembly (three used) |
RG5-6307-020CN |
ADF scanner (optical) assembly - Includes the chassis assembly, scanner lens assembly (includes the Charge Coupled Device (CCD)), the scanning lamp, ADF analog processor board, and ADF inverter board - Major portion of the ADF main assembly |
RG5-6311-000CN |
Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly |
RG5-6312-000CN |
ADF cooling fan assembly - Includes the fan assembly, fan housing, and interconnecting cable - Mounts on the left rear of the ADF base assembly |
RG5-6312-030CN |
ADF cooling fan assembly - Includes the fan assembly, fan housing, and interconnecting cable - Mounts on the left rear of the ADF base assembly |
RG5-6313-000CN |
Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly |
RG5-6313-030CN |
Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly |
RG5-6315-000CN |
Rear ADF cover assembly - Includes the rear ADF electronics cover and the two hinge covers |
RG5-6316-000CN |
ADF paper output tray - Includes the tray with pull-out extension - Receives scanned pages from the ADF assembly - Mounts on the left side of the ADF/scanner assembly |
RG5-6317-000CN |
Hinge cover assembly - Flexible hinge with four divisions - Mounts on the rear between the ADF assembly and the scanner assembly (two used) |
RG5-6318-000CN |
24VDC cooling fan assembly - Includes fan, filter and metal grill - Mounts on the rear support frame in the left rear corner of the scanner assembly |
RG5-6318-030CN |
24VDC cooling fan assembly - Includes fan, filter and metal grill - Mounts on the rear support frame in the left rear corner of the scanner assembly |
RG5-6320-000CN |
Flip down glass assembly - Flips down when scanning documents through the ADF assembly - Mounts on the bottom of the ADF optical assembly |
RG5-6380-000CN |
Laser/scanner assembly - Separate scanner used for each toner cartridge. |
RG5-6390-000CN |
Laser/scanner assembly - Separate scanner used for each toner cartridge. |
RG5-6391-100CN |
DC controller PC board |
RG5-6391-110CN |
DC controller PC board |