Part |
Picture |
Description |
RG5-6956-000CN |
E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board |
RG5-6957-000CN |
E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board |
RG5-6958-000CN |
Rotary motor assembly |
RG5-6959-060CN |
DC controller board |
RG5-6960-000CN |
High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer |
RG5-6964-000CN |
Carousel position and toner level photoelectric sensor PC board - L Shaped PC board with the two sensors |
RG5-6965-000CN |
Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assembly |
RG5-6967-000CN |
Registration sensor PC Board - Small board with flag activated photosensor |
RG5-6968-000CN |
Interconnecting feed drive PC board |
RG5-6969-000CN |
Feed drive board assembly |
RG5-6971-000CN |
Cable assembly (two 3-pin connectors and a spad lug) |
RG5-6974-000CN |
Cable assembly for HP Color LaserJet 1500 Series |
RG5-6979-000CN |
Connector pcb assy |
RG5-6979-020CN |
Pedestal connector assembly - Contains both power connectors located on both sides at rear of pedestal and Pedestal Controller PC board |
RG5-6981-000CN |
Cable holder assy |
RG5-6981-040CN |
Pedestal connector assembly - Jetlink connector assembly between HCI (High Capacity Input) assembly and printer engine |
RG5-6982-000CN |
Rear cover assy |
RG5-6982-020CN |
Rear cover assembly - Rear plastic pedestal cover with input side cover |
RG5-7106-000CN |
Cable assembly (two 2-pin connectors) |
RG5-7107-000CN |
Cable assembly (8-pin, red wire) |
RG5-7108-000CN |
Cable assembly (two 8-pin connectors, Purple wire) |
RG5-7109-000CN |
Cable assembly (two 7-pin connectors) |
RG5-7114-000CN |
Cable assembly (two 4-pin connectors) with shield |
RG5-7114-020CN |
Cable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller board |
RG5-7115-000CN |
Cable assembly (two 3-pin connectors) |
RG5-7117-000CN |
Cable assembly (two 3-pin connectors) |
RG5-7122-000CN |
Cable assembly - Y type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector |
RG5-7123-000CN |
Grounding cable assembly |
RG5-7124-000CN |
Sub-high voltage board - Small auxillary PC board |
RG5-7126-000CN |
Cable assembly (two 5-pin connectors) |
RG5-7128-000CN |
Cable assembly (four 3-pin connectors) |
RG5-7129-000CN |
Cable assembly (two connectors and two spade lugs) |
RG5-7130-000CN |
High voltage cable assembly |
RG5-7131-000CN |
E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board |
RG5-7132-000CN |
E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board |
RG5-7138-000CN |
Cable assembly for HP Color LaserJet 2820 Series |
RG5-7139-000CN |
Cable assembly for HP Color LaserJet 2500 Series |
RG5-7142-000CN |
Cable assembly for HP Color LaserJet 2500 Series |
RG5-7144-000CN |
Cable assembly (with seven connectors) |
RG5-7145-000CN |
Front cable assembly (six connectors) |
RG5-7146-000CN |
High voltage cable assembly (two 15-pin connectors and two 14-pin connectors) |
RG5-7149-000CN |
Connector assembly - Includes the 14-pin (F) interface connector and cable assembly |
RG5-7150-000CN |
Connector assembly - Includes the 14-pin (F) interface connector and cable assembly |
RG5-7154-000CN |
Fuser Assembly cable (for 110VAC to 127VAC operation) |
RG5-7155-000CN |
Fuser Assembly cable (for 220VAC to 240VAC operation) |
RG5-7156-000CN |
Cable assembly (two 2-pin connectors) |
RG5-7160-000CN |
Upper cable assembly (seven connectors) |
RG5-7161-000CN |
Cable assembly (two 3-pin connectors and a spad lug) |
RG5-7162-000CN |
Fusing film assembly (for 110VAC to 127VAC operation) - Includes the heater assembly and the fusing film tube |
RG5-7162-030CN |
Fusing film assembly (for 110VAC to 127VAC operation) - Includes the heater assembly and the fusing film tube |
RG5-7163-000CN |
Fusing film assembly (for 220VAC to 240VAC operation) - Includes the heater assembly and the fusing film tube |
RG5-7163-030CN |
Fusing film assembly (for 220VAC to 240VAC operation) - Includes the heater assembly and the fusing film tube |
RG5-7379-000CN |
ADF main assembly - Includes the main assembly structure pieces, ADF scanner (optical) assembly, registration guide assembly, release handle, and various other components - Mounts in the top of the ADF paper pickup assembly |
RG5-7379-040CN |
ADF main assembly - Includes the main assembly structure pieces, ADF scanner (optical) assembly, registration guide assembly, release handle, and various other components - Mounts in the top of the ADF paper pickup assembly |
RG5-7380-000CN |
ADF scanner (optical) assembly - Includes the chassis assembly, scanner lens assembly (includes the Charge Coupled Device (CCD)), the scanning lamp, ADF analog processor board, and ADF inverter board - Major portion of the ADF main assembly |
RG5-7380-020CN |
ADF scanner (optical) assembly - Includes the chassis assembly, scanner lens assembly (includes the Charge Coupled Device (CCD)), the scanning lamp, ADF analog processor board, and ADF inverter board - Major portion of the ADF main assembly |
RG5-7433-000CN |
Cable assembly - Connects between the Interconnecting feed drive PC board and the printer connector |
RG5-7450-110CN |
LaserJet 4650 Fuser Assembly - For 110 VAC operation - Bonds toner to paper with heat |
RG5-7450-130CN |
LaserJet 4650 Fuser Assembly - Bonds toner to paper with heat - For 110VAC operation |
RG5-7451-130CN |
LaserJet 4650 Fuser Assembly - Bonds toner to paper with heat - For 220VAC operation |
RG5-7452-000CN |
Fuser drive assembly |
RG5-7453-000CN |
Paper pickup assembly - Tray 2 paper pickup assembly |
RG5-7455-000CN |
LaserJet 4650 Image Transfer Belt - Electrostatic transfer belt assembly with cleaning cloth |
RG5-7459-120CN |
Tray 2 paper cassette assembly |
RG5-7466-000CN |
Paper pickup drive assembly - Tray 2 paper pickup drive assembly |
RG5-7467-000CN |
Drum drive assembly - For magenta and cyan cartridges |
RG5-7468-000CN |
Drum drive assembly - For black cartridge |
RG5-7469-000CN |
Drum drive assembly - For yellow cartridge |
RG5-7470-030CN |
DC controller PC board |
RG5-7471-000CN |
Environment/humidity sensor cable - From environment/humidity sensor to DC controller board |
RG5-7475-000CN |
Laser/scanner assembly - Separate scanner used for each toner cartridge |
RG5-7480-000CN |
Fuser drawer fusing cable |
RG5-7494-000CN |
Rear cover - Rear of printer cover |
RG5-7518-000CN |
Paper feeder driver PCA assembly - Driver PC board for 2 X 500 feeder tray assembly |
RG5-7523-000CN |
Outrigger stabilizer assembly - Side stabilizer leg with adjustable foot - Six used |
RG5-7529-000CN |
Paper pickup assembly - 2 X 500 sheet feeder upper paper pickup assembly - Paper pickup assembly for upper paper cassette |
RG5-7530-000CN |
Paper pickup assembly - 2 X 500 sheet feeder lower paper pickup assembly - Paper pickup assembly for lower paper cassette |
RG5-7531-000CN |
Drive assembly - 2 X 500 paper pickup feeder drive assembly - Includes motor and both solenoids |
RG5-7532-000CN |
Outrigger stabilizer assembly - Side stabilizer leg with adjustable foot - Six used |
RG5-7534-050CN |
Paper cassette - Lower 500 sheet paper cassette - Bottom paper cassette of 2 X 500 sheet feeder/tray assembly |
RG5-7535-000CN |
Paper cassette - Upper 500 sheet paper cassette - Top paper cassette of 2 X 500 sheet feeder/tray assembly |
RG5-7535-050CN |
Paper cassette - Upper 500 sheet paper cassette - Top paper cassette of 2 X 500 sheet feeder/tray assembly |
RG5-7541-000CN |
Feed drive assembly - Includes the metal plate, drive motor, pickup drive solenoid, and drive gears - For the 500-sheet paper feeder assembly - Mounts on the left side of the feeder base assembly |
RG5-7541-020CN |
Feed drive assembly - Includes the metal plate, drive motor, pickup drive solenoid, and drive gears - For the 500-sheet paper feeder assembly - Mounts on the left side of the feeder base assembly |
RG5-7542-000CN |
Controller PC board - For the 500-sheet paper feeder assembly - Includes the control circuitry and paper size detection sensor fingers - Mounts on the left side of the feeder base assembly |
RG5-7567-000CN |
Top cover assembly (Graphite Black plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly |
RG5-7569-000CN |
Right side cover assembly (Light Gray plastic) - Includes the DIMM memory door |
RG5-7570-000CN |
Control panel assembly (mechanical only) - Includes the Rotate Carousel, Cancel Job and the Go buttons, plus the various indicator light pipes - All switches and LEDs are on the formatter PC board |
RG5-7570-020CN |
Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board - Mounts to the top of the right cover assembly |
RG5-7571-000CN |
Left side cover assembly (Alloy Gray plastic) - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board) |
RG5-7572-110CN |
Fuser Assembly - For 110V to 127V AC operation - Bonds the toner to the paper with heat |
RG5-7573-000CN |
Fuser Assembly - For 220V to 240V AC operation - Bonds the toner to the paper with heat |
RG5-7573-110CN |
Fuser Assembly - For 220V to 240V AC operation - Bonds the toner to the paper with heat |
RG5-7576-000CN |
Separation upper guide assembly - Ribbed plastic channel with pivot pins on each end and two pinch rollers for the paper delivery roller |
RG5-7577-000CN |
Lower guide assembly - Includes the support structure, delivery roller, drive gear, paper photo-sensor, sensor flags, and upper separation guide |
RG5-7577-030CN |
Lower guide assembly - Includes the support structure, delivery roller, drive gear, paper photo-sensor, sensor flags, and upper separation guide - Mounts on the rear of the fuser support frame assembly |
RG5-7579-000CN |
Main drive (right side plate) assembly - Includes the right side plate front assembly (with main motor, clutch, and gears) and the right side plate rear assembly (with drive gears) |
RG5-7579-070CN |
Main drive (right side plate) assembly - Includes the right side plate front assembly (with main motor, clutch, and gears) and the right side plate rear assembly (with drive gears) |
RG5-7580-000CN |
Right side plate rear assembly - Includes the rear half of the metal right side plate and the two associated gears |
RG5-7580-020CN |
Right side plate rear assembly - Includes the rear half of the metal right side plate and the two associated gears |
RG5-7581-000CN |
Right side plate front assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side |
RG5-7581-060CN |
Right side plate front assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side |
RG5-7584-000CN |
Paper guide assembly - Paper width adjustable guide assembly for the multipurpose front input tray (tray 1) |
RG5-7585-000CN |
Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender - Mounts on front of printer (on the front frame assembly) |
RG5-7587-000CN |
Carousel (rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables |
RG5-7587-090CN |
Carousel (rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables |
RG5-7589-000CN |
Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft |
RG5-7592-000CN |
Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears |
RG5-7593-000CN |
Rotary motor assembly - (DCM703) Rotates the four color toner cartridges in the carousel to position one of them for printing |
RG5-7595-000CN |
Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear |
RG5-7597-000CN |
Top cover assembly - Includes the rear cover with molded-in face-down output tray and the lift-up toner cartridge / imaging drum and transfer assembly cartridge access door - Does NOT include the upper front cover |