| Part |
Picture |
Description |
| RG5-3463-000CN |
Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat |
| RG5-3474-020CN |
Delivery assembly - Attaches to the lower center area of the internal chassis - Includes four White multi-ridged and two other delivery rollers and their associated springs |
| RG5-3475-000CN |
Separation guide assembly - Includes the face-up/face-down paper selection lever/deflector and Fuser Assembly exit roller assembly |
| RG5-3476-000CN |
Face-up/face-down shaft and media deflector |
| RG5-3478-000CN |
Paper guide - Inside spur assembly |
| RG5-3479-000CN |
Paper guide - Outside spur assembly |
| RG5-3484-070CN |
Paper pickup assembly |
| RG5-3485-030CN |
Feed assembly - Has idler roller, sensor flag and paper input sensor |
| RG5-3486-040CN |
Pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit |
| RG5-3488-000CN |
Input bin assembly - Paper input supply bin |
| RG5-3491-000CN |
Single sheet input slot - Manual feed tray |
| RG5-3497-000CN |
Laser/scanner assembly |
| RG5-3499-000CN |
Cable - From control panel to formatter board |
| RG5-3506-000CN |
DC controller/power supply board - 120VAC |
| RG5-3517-000CN |
HP Laserjet DC Controller Engine Board. DC controller motherboard assembly. |
| RG5-3519-000CN |
Pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit |
| RG5-3519-020CN |
Pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit |
| RG5-3519-070CN |
Tray 1 pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit |
| RG5-3520-000CN |
Paper guide - Tray 1 paper guide plate assembly |
| RG5-3520-060CN |
Paper guide - Tray 1 paper guide plate assembly |
| RG5-3521-020CN |
Tray 2 paper pickup roller assembly |
| RG5-3521-040CN |
Tray 2 paper pickup roller assembly |
| RG5-3522-030CN |
Paper feed roller assembly |
| RG5-3522-050CN |
Paper Feed Roller Assembly |
| RG5-3523-000CN |
Cable assembly for HP LaserJet 5000 Series |
| RG5-3524-000CN |
Registration roller assembly |
| RG5-3524-110CN |
Registration roller assembly |
| RG5-3524-130CN |
Registration Roller Assembly |
| RG5-3525-000CN |
Transfer guide assembly - Guides paper into transfer roller |
| RG5-3526-020CN |
Paper feed belt assembly |
| RG5-3542-000CN |
Upper delivery roller assembly - Paper output roller assembly - Includes right and left roller bushings, anti-static brush and delivery guide |
| RG5-3542-070CN |
Upper delivery roller assembly - Paper output |
| RG5-3542-090CN |
Upper delivery roller assembly - Paper output roller assembly - Includes right and left roller bushings anti-static brush and delivery guide |
| RG5-3543-000CN |
Main gear assembly |
| RG5-3544-000CN |
Paper pickup drive assembly |
| RG5-3545-000CN |
Power inlet assembly - A/C input and power switch |
| RG5-3547-080CN |
Front inner cover assembly - With tray 1 sensor arm, arm spring and tray 1 leaf spring |
| RG5-3548-060CN |
Transfer guide assembly - Includes the width adjuster for the drop down tray |
| RG5-3549-000CN |
Front cover assembly - Drop down paper tray assembly |
| RG5-3550-040CN |
Left side cover assembly |
| RG5-3551-100CN |
Rear cover assembly |
| RG5-3552-060CN |
Face up tray assembly - Drop down output tray with extension |
| RG5-3553-000CN |
Rear door sensor assembly - Arm and mount assembly |
| RG5-3554-000CN |
Face down bin full cable |
| RG5-3556-000CN |
Toner cartridge access door assembly |
| RG5-3556-040CN |
Toner cartridge access door assembly |
| RG5-3557-000CN |
Cable assembly - A 20-pin (F) connector to two 14cm (5.5in) cables with 7-pin (F) connectors, a 31.5cm (12.4in) cable with a 9-pin (F) connector, and a 39.4cm (15.5in) cable with a 3-pin (F) connector |
| RG5-3558-000CN |
Top of page sensor cable |
| RG5-3560-000CN |
Paper handling PCA |
| RG5-3561-000CN |
HP Cable for LaserJets, fuser cable. |
| RG5-3562-000CN |
Cable assembly - A 22-pin (F) connector to many cables: 32.4cm (12.8in) with 8-pin (F) connector, 34.9cm (13.8in) with 7-pin (F) connector, 40.3cm (15.9in) with 4-pin (F) connector, and 66.4cm (26.1in) with 3-pin (F) connector |
| RG5-3575-000CN |
Control panel cable |
| RG5-3579-000CN |
Transfer roller assembly |
| RG5-3579-020CN |
Transfer Roller Assembly |
| RG5-3603-000CN |
Laser/Scanner Assembly |
| RG5-3624-100CN |
Reversing assembly for Duplexer assembly |
| RG5-3644-030CN |
Pickup roller assembly - Includes the roller shaft with the paper pickup (D-shaped) roller, two hard plastic side cams, and bushings - Mounts in the top front of the 250-sheet paper feeder assembly base unit |
| RG5-3661-000CN |
Cable assembly for HP LaserJet 6L Series |
| RG5-3662-000CN |
Cable assembly for HP LaserJet 6L Series |
| RG5-3676-000CN |
Low voltage power supply - Includes power switch, AC receptacle, and DC power supply |
| RG5-3693-080CN |
Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate |
| RG5-3694-080CN |
Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate |
| RG5-3696-000CN |
AC power receptacle - Connector and housing assembly |
| RG5-3700-000CN |
Cable assembly - 3-pin (F) connectors on each end - 10.0cm (3.9in) long |
| RG5-3703-000CN |
Cable assembly - Large 6-pin (F) connector to both a 6.5cm (2.6in) grounding cable with a ring terminal and a 39.4cm (15.5in) cable with a small 6-pin (F) connector |
| RG5-3704-000CN |
Envelope feeder connector and cable |
| RG5-3705-000CN |
Cable assembly - A 6-pin (F) connector to both a 21.3cm (8.4in) cable with a 3-pin (F) connector and a 27.2cm (10.7in) cable with a 3-pin (F) connector |
| RG5-3706-000CN |
Feed/registration sensor assembly cable |
| RG5-3708-000CN |
Cable assembly - A 38-pin (F) connector to a 14cm (5.5in) ribbon cable with a 26-pin (F) connector, a 20cm (7.9in) ribbon cable with a 10-pin (F) connector, and a 34.6cm (13.6in) 2 wire cable with a 2-pin (F) connector |
| RG5-3709-000CN |
Main motor cable |
| RG5-3710-000CN |
Paper feeder module cable |
| RG5-3711-000CN |
Optical sensor cable |
| RG5-3712-000CN |
Lower tray connector and cable |
| RG5-3718-000CN |
Tray 1 pickup roller assembly - D-shaped roller with blue shaft lock latch |
| RG5-3721-000CN |
Delivery drive assembly |
| RG5-3723-000CN |
MP tray coupler gear and mounting plate |
| RG5-3768-000CN |
DC controller/power supply board - 240VAC |
| RG5-3821-000CN |
Lower tray logic PCA - With tray size switches for 500 sheet feeder. ( for 250 sheet feeder RG5-2685-000CN). |
| RG5-3822-000CN |
Paper feeder cable |
| RG5-3843-000CN |
2000 sheet paper tray paper pickup assembly - Not compatible with C3763A and C3773A Input Tray |
| RG5-3845-000CN |
2000 sheet paper tray (Tray 4) - Paper holder cassette ONLY |
| RG5-3849-000CN |
Middle paper limit plate |
| RG5-3850-000CN |
Front paper reference plate - Front paper limit plate for 2,000-sheet feeder |
| RG5-3851-000CN |
Paper deck drive assembly - Gear assembly that lifts the paper plate to the pickup roller |
| RG5-3852-000CN |
Cabinet stabilizer (outrigger) - With adjustable foot |
| RG5-3853-000CN |
Adjustable foot - Threaded attachment for leveling |
| RG5-3854-000CN |
Paper feed assembly - Vertical transfer unit for 2000 tray assembly - Transfers paper from pickup assembly up to the printer input has 2 connectors (for 3 connectors unit 2x500 tray unit order C4780-69503). |
| RG5-3876-000CN |
Cable assembly with ferrite - A 13-pin (F) connector, a 6-pin (F) connector, a 4-pin (F) connector, and three 3-pin (F) connectors - 38.4cm (15.1in) long |
| RG5-3908-000CN |
Paper deck PCA - Input tray controller PCA |
| RG5-3909-000CN |
Power supply cable - Between power supply and controller PCA |
| RG5-3919-000CN |
Main cable - Largest cable in C4781A |
| RG5-3922-000CN |
Cable assembly for HP Color LaserJet 8550 Series |
| RG5-4021-000CN |
Universal power supply |
| RG5-4110-000CN |
Fuser Assembly (for 100V to 120V operation) - Bonds toner to paper with heat |
| RG5-4111-000CN |
Fuser Assembly (For 220V to 240V operation) - Bonds toner to paper with heat |
| RG5-4119-000CN |
Delivery roller assembly - Lower face-down output roller assembly - Includes roller and holder Four used |
| RG5-4121-000CN |
Multi-purpose input tray cover assembly - Includes pull-out and flip-out tray extensions |
| RG5-4122-000CN |
Top cover asembly - Face-down output tray and toner cartridge access door |
| RG5-4123-000CN |
DIMM Cover Assembly - Right Side Cover - Includes I/O Cover |
| RG5-4123-140CN |
DIMM Cover Assembly - Right Side Cover - Includes I/O Cover on Right Rear, Optical Filter Cover on Right Front, Control Buttons and LEDs on top right side |
| RG5-4125-020CN |
Engine controller board - For 100V-127V operation |
| RG5-4126-000CN |
Multi-Purpose input tray (Tray 1) |
| RG5-4127-070CN |
Tray 2 pickup assembly |
| RG5-4128-000CN |
Multi-purpose tray pickup roller assembly - Includes pickup roller, roller cam, right and left cams, both round rollers and dowel pin |
| RG5-4129-000CN |
Registration assembly - Registration shutter and roller with holder frame assembly |
| RG5-4131-020CN |
Printer drive assembly |
| RG5-4132-170CN |
Fusing Roller Assembly (For 100V to 127V operation) - Bonds the toner to the paper with heat |
| RG5-4133-170CN |
Fusing Roller Assembly (For 220V operation) - Bonds the toner to the paper with heat |
| RG5-4134-000CN |
Fusing roller assembly (For 100V to 120V operation) - Includes heating element and fixing film sleeve |
| RG5-4134-040CN |
Fusing roller assembly (For 100V to 120V operation) - Includes heating element and fixing film sleeve |
| RG5-4135-040CN |
Fusing roller assembly (For 220V to 240V operation) - Includes heating element and fixing sleeve |
