Part |
Picture |
Description |
RH7-5312-020CN |
Solenoid (24 VDC) assembly - Activates the paper feed shutter assembly - Mounts on the rear frame of the ADF paper pick-up assembly towards the right |
RH7-5315-000CN |
24V DC Solenoid - Engages the pickup roller gear/clutch assembly |
RH7-5345-000CN |
Paper feed clutch - For Tray 2 |
RH7-5346-000CN |
Paper feed roller clutch - For Tray 2 |
RH7-5355-000CN |
Paper pick-up solenoid |
RH7-5357-000CN |
Tray 1 solenoid - Engages Tray 1 pickup roller |
RH7-5358-000CN |
Paper feed assembly clutch (CL101) - Electro mechanical clutch that connects to the white 30-tooth gear |
RH7-6017-000CN |
Power switch (rocker) |
RH7-6020-000CN |
On/off rocker switch for power switch assembly - 250V, 16A |
RH7-6051-000CN |
Microswitch with lever activator |
RH7-7045-000CN |
Thermistor assembly - Includes cable |
RH7-7054-000CN |
Thermistor assembly - Includes cable |
RH7-7105-000CN |
Surface temperature sensor - Fuser temperature sensor on opposite side of gear assembly of Fuser Assembly |
RH7-7106-000CN |
Thermal switch - Fuser assembly thermal switch located on opposite side of gear assembly of Fuser Assembly |
RK2-0029-000CN |
Flex cable - Has two 14-pin (M) edge connectors |
RK2-0062-000CN |
DC stepper motor assembly - Drives all rollers and Fuser Assembly via the gear train on the right side plate |
RK2-0063-000CN |
DC stepper motor assembly - Drives all rollers and Fuser Assembly via the gear train on the right side plate |
RK2-0064-000CN |
24VDC Solenoid for HP LaserJet 3380 Series |
RK2-0107-000CN |
Stepping Motor - Main drive motor for the printer |
RK2-0185-000CN |
Flat flexible cable (FFC) |
RK2-0232-000CN |
Scanner control panel assembly - Includes the display and all the number and function keys mounted on a circuit board (Does NOT include the top cover) |
RK2-0236-000CN |
Flexible flat cable (FFC) assembly - Interconnects the control panel to the printer formatter board |
RK2-0269-000CN |
Paper pick-up solenoid |
RK2-0270-000CN |
Tray 2 pick-up solenoid - Mounts on the paper pick-up drive assembly |
RK2-0272-000CN |
Main motor - M101 FOR HEWLETT PACKARD LASERJET MODELS. |
RK2-0273-000CN |
Main motor - M101 FOR HEWLETT PACKARD LASERJET MODELS. |
RK2-0274-000CN |
Toner cartridge motor - Motor on front right side of printer (M102) |
RK2-0275-000CN |
Toner cartridge motor (M102) - Mounts on the front right side of the printer |
RK2-0276-000CN |
Tray 1 solenoid - Engages tray 1 pick-up roller |
RK2-0278-000CN |
Cooling fan on left side of printer - FN101 |
RK2-0280-000CN |
Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area |
RK2-0288-000CN |
Ribbon cable - Between DC Controller board (J81) and power supply board (J51) |
RK2-0290-000CN |
Ribbon cable - Between DC Controller board (J80) and power supply board (J50) |
RK2-0349-000CN |
Paper feed assembly clutch (CL101) - Electro mechanical clutch that connects to the white 30-tooth gear |
RK2-0359-000CN |
Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up. |
RK2-0360-000CN |
Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up. |
RK2-0418-000CN |
DC stepper motor assembly - Drives all rollers and Fuser Assembly via the main drive gear assembly - Mounts on the inside rear of the right side plate assembly |
RK2-0419-000CN |
DC stepper motor assembly - Drives all rollers and Fuser Assembly via the main drive gear assembly - Mounts on the inside rear of the right side plate assembly |
RK2-0420-000CN |
24V DC Solenoid (SL3) - Engages the 'normal' and 'reverse' ratchet gears on the duplex drive gear assembly - Mounts on the right side plate assembly |
RK2-0424-000CN |
24V DC Solenoid (SL1) - Engages the pickup roller gear/clutch assembly for tray 2 (250-sheet tray) - Mounts on the right side plate assembly |
RK2-0428-000CN |
Fan assembly - Includes the small cooling fan and cable - Mounts in the fan housing / air flow guide on the right side plate assembly |
RK2-0469-000CN |
Ribbon cable - Flat cable between DC Controller Board and engine power supply board - J81 to J51 |
RK2-0470-000CN |
Ribbon cable - Flat cable between DC Controller Board and engine power supply board - J80 to J50 |
RK2-0472-000CN |
DC Controller fan (FN104) - Provides air to the DC controller area |
RK2-0473-000CN |
Stepper motor (M104) - Crossing motor located in the paper reversing assembly |
RK2-0474-000CN |
Stepper motor (M105) - Motor that drives the reversing roller located in the paper reversing assembly |
RK2-0475-000CN |
Stepper motor (M106) - Paper delivery motor located in the paper reversing assembly |
RK2-0485-000CN |
Solenoid - Reversing unit face up solenoid - SL105 |
RK2-0486-000CN |
Solenoid - Reversing unit separation roller solenoid - SL106 |
RK2-0507-000CN |
Stapler mechanism |
RK2-0523-000CN |
Electric stepper motor - Fuser drive assembly motor - Motor M2 |
RK2-0526-000CN |
Tray 1 paper pickup solenoid - Solenoid SL1 |
RK2-0528-000CN |
Tray 2 paper pickup solenoid - Solenoid SL2 |
RK2-0534-000CN |
Microswitch - Door open switch - SW501 |
RK2-0535-000CN |
Microswitch (SW2) |
RK2-0571-000CN |
Cooling fan - Main cooling fan FM1 - Located in lower right front side |
RK2-0573-000CN |
Cooling fan - Fan FM2 - Located on lower left side of printer |
RK2-0777-000CN |
Stepping motor - Main drive motor for the printer - Motor M1 |
RK2-0799-000CN |
Stepping Motor - Main drive motor for the printer - Mounts on the upper front of the internal right frame assembly |
RK2-0910-000CN |
Duplexer solenoid - Solenoid SL3 |
RK2-0911-000CN |
Duplexer solenoid - Solenoid SL3 |
RK2-0912-000CN |
Main cooling fan - Fan FM1 |
RK2-1053-000CN |
Flexible flat cable - 21 pin connector |
RK2-1054-000CN |
21-pin flat flexible cable |
RK2-1055-000CN |
Flexible flat cable - 23 pin connector |
RK2-1056-000CN |
23-pin flat flexible cable |
RK2-1062-000CN |
DC stepper motor - Provides power for mechanical movement parts in 500 sheet feeder assembly - Located on right side of feeder assembly |
RK2-1065-000CN |
Stepping motor, dc |
RK2-1067-000CN |
Duplexer fan - Cooling fan inside plastic cover of mechanical section of duplexer assembly |
RK2-1069-000CN |
Light guide module - Provides light source used by sensors in duplexer assembly |
RK2-1089-000CN |
FAN Low voltage power supply cooling fan - Located on upper right side of printer above low voltage power supply |
RK2-1090-000CN |
Right fan (FM1) assembly |
RK2-1091-000CN |
Cooling fan - Fan located on upper left side of printer. |
RK2-1092-000CN |
Cooling Fan (Fm3) |
RK2-1096-000CN |
Solenoid - Located on right front side of printer chassis |
RK2-1097-000CN |
Control panel assembly - Includes the plastic shell and the control panel PC board - (Does NOT include overlays) - Mounts to the top right side of printer |
RK2-1103-000CN |
Switch cassette size detect |
RK2-1209-000CN |
Control panel electronics assembly - Control panel display and buttons assembly (English) - Does not include cover plastic |
RK2-1214-000CN |
Scanner cable - Flat cable from document scanner assembly |
RK2-1281-000CN |
Electromagnetic clutch (CL2) |
RK2-1283-000CN |
Cable flat, 15p |
RK2-1284-000CN |
Rear cooling fan - 2-wire, 92mm x 92mm x 25mm, 12VDC, 0.30A (black) |
RK2-1285-000CN |
Front cooling fan - Mounts on the front part of the printer on top of the tray 3 - Does not include housing |
RK2-1331-000CN |
Stepping motor - Main drive motor for the printer - Motor M1 |
RK2-1378-000CN |
Fuser cooling fan (FM2) - Provides air to the fuser area |
RK2-1488-000CN |
Main motor (M1) - DC motor located on the inner left side of the printer |
RK2-1489-000CN |
Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly |
RK2-1490-000CN |
Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly. |
RK2-1492-000CN |
Solenoid (SL2) - For tray 2 - Mounts on the main drive assembly |
RK2-1497-000CN |
Cooling fan - Located on the right side of the printer. |
RK2-1499-000CN |
Cooling fan (FM2) - Located on the left side of the printer - Small fan that cools the fuser assembly and print cartridge area |
RK2-1567-000CN |
MOTOR, DC DC Motor - Provides power for drive assembly - Located on the right side of printer - Motor (M1) |
RK2-1587-000CN |
Multipurpose paper input tray solenoid (SL2) |
RK2-1589-000CN |
Fan assembly - For the LaserJet P2010 printer series |
RK2-1988-000CN |
Cooling fan (FN101) - Fan that cools the cartridge and power supply area |
RK2-1989-000CN |
Cooling fan (FN103) - Fan that cools the cartridge area |
RK2-1991-000CN |
Cooling fan (FN301) - Fan that cools the cartridge and laser/scanner area |
RK2-1992-000CN |
Cooling fan (FN102) - Exhausts heat from toner cartridges |
RK2-2015-000CN |
Duplex Reverse Motor (M1501) - For 24 Vac |
RK2-2016-000CN |
Duplexer Cooling Fan (Fn1501) - Provides Air To The Duplexer Area For Cooling |
RK2-2025-000CN |
Stepping Motor (M1103) - Located On The Stapler/Stacker Area - For 24 Vac |
RK2-2027-000CN |
Stepping Motor (M1101) - Located On The Stapler/Stacker Area - For 24 Vac |
RK2-2082-000CN |
Cooling fan - Fan (FM1) - Located on upper left rear side of the printer |
RK2-2139-000CN |
Stepping Motor (M1502) - Located On The Duplexer Area - For 24 Vac |
RK2-2162-000CN |
Stepping Motor (M1800) - Located On The Envelope Feeder Area - For 24 Vac |
RK2-2276-000CN |
Cooling fan (FM1) - Provides air to the right side of the printer |
RK2-2415-000CN |
Development disengagement stepping DC motor (M10) - Disengages the developer from the primary charge roller |
RK2-2416-000CN |
Low voltage power supply fan (FM1) |
RK2-2418-000CN |
Cartridge area cooling fan (FM2) Fuser area cooling fan (FM4) |
RK2-2727-000CN |
Delivery Fan (FM3) - Provides air to the paper delivery area |
RK2-2728-000CN |
Delivery Fan (FM3) - Provides air to the paper delivery area |