Part |
Picture |
Description |
RM1-1018-000CN |
Duplexer slot cover assembly - Removable lower rear cover for Duplexer attachment slot |
RM1-1019-000CN |
Reversing separation guide assembly |
RM1-1022-000CN |
Reversing assembly - Reverses paper orientation of output tray |
RM1-1027-000CN |
Guide assembly - Guide that protects the large flat cable between the Scanner Controller PCA to the Formatter PCA |
RM1-1029-000CN |
Lifter drive assembly support - Tray 2 paper pickup lifter drive support assembly |
RM1-1029-040CN |
Lifter drive assembly support - Tray 2 paper pickup lifter drive support assembly |
RM1-1033-000CN |
Lower right cover assembly - Smaller plastic piece below upper right cover - Allows access to Tray 2 separation roller |
RM1-1041-000CN |
Engine power supply board - 110VAC |
RM1-1041-040CN |
Engine power supply board - For 110 VAC |
RM1-1042-000CN |
Engine power supply board - 220VAC |
RM1-1042-040CN |
Engine power supply board - For 220 VAC |
RM1-1043-040CN |
Hp fuser assembly 110v |
RM1-1043-080CN |
Fuser Assembly - For 100-127 VAC - Bonds toner to paper with heat |
RM1-1044-000CN |
Hp fuser assembly 220-240v, Fusing assembly - For 220 VAC operation - Bonds toner to paper with heat |
RM1-1044-040CN |
Fuser Assembly - 220 volts, Fusing assembly - For 220 VAC operation - Bonds toner to paper with heat |
RM1-1044-080CN |
Fuser Assembly - 220/240 VAC - Bonds toner to paper with heat |
RM1-1045-000CN |
Door sensor assembly - 500-sheet feeder assembly access door open sensor (SW501) switch assembly |
RM1-1046-000CN |
Entrance guide - Fuser paper entrance guide |
RM1-1046-020CN |
Entrance guide - Fuser paper entrance guide |
RM1-1047-000CN |
LaserJet 4345mfp delivery tray assembly |
RM1-1049-000CN |
Main drive gear assembly - Located at the rear part of the printer |
RM1-1060-030CN |
Paper pick up drive assembly |
RM1-1066-000CN |
Main drive assembly - Main gear assembly on right side of printer |
RM1-1067-000CN |
Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers |
RM1-1067-030CN |
Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers |
RM1-1070-000CN |
Power supply assembly - For LaserJet 4240/4250/4350 - For 110VAC to 127VAC operation |
RM1-1070-040CN |
Power supply assembly - For LaserJet 4240/4250/4350 - For 110V to 127VAC operation |
RM1-1070-050CN |
Power supply assembly - For LaserJet 4240/4250/4350 - For 110V to 127VAC operation |
RM1-1071-000CN |
Power supply assembly - For LaserJet 4240/4250/4350 - For 220V to 240VAC operation |
RM1-1071-040CN |
Power supply assembly - For LaserJet 4240/4250/4350 - For 220V to 240VAC operation |
RM1-1074-000CN |
Tray 2 lifter drive assembly - Provides lift support for paper tray |
RM1-1074-040CN |
Tray 2 lifter drive assembly - Provides lift support for paper tray |
RM1-1076-000CN |
Right side cover assembly |
RM1-1077-000CN |
Left side cover panel |
RM1-1080-000CN |
Cartridge access door cover for LaserJet 4250/4350 family |
RM1-1081-000CN |
Top cover assembly - Top paper output tray and top of printer |
RM1-1082-000CN |
Fuser Assembly - For 110 VAC - Bonds toner to paper with heat |
RM1-1082-070CN |
Fuser assembly - For LaserJet 4250/4350 series - 110 VAC |
RM1-1082-090CN |
Fuser assembly - For LaserJet 4250/4350 series - 110 VACFusing assembly - For 110 VAC - Bonds toner to paper with heat |
RM1-1082-100CN |
fusing assy 110v |
RM1-1083-070CN |
Fuser assembly - For LaserJet 4250/4350 series - 220 VAC |
RM1-1083-090CN |
Fuser assembly - For 220 VAC - For LaserJet 4250/4350 series |
RM1-1083-100CN |
Fussing assy 220vFussing assy 220v Replaced: RM1-1083-070CN |
RM1-1088-000CN |
500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into |
RM1-1088-050CN |
500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes int |
RM1-1088-070CN |
500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into |
RM1-1088-090CN |
500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into. |
RM1-1089-000CN |
Cassette Rear Assy |
RM1-1089-030CN |
Cassette Rear Assy |
RM1-1091-000CN |
FUSER GEAR UNIT. Gear is attached on the fuser and the swing plate unit.(for Fuser gear unit and swing plate assy. kit order (5851-2766). |
RM1-1094-000CN |
Lifter drive assembly for 500 sheet feeder |
RM1-1094-050CN |
Lifter drive assembly for 500 sheet feeder |
RM1-1097-000CN |
Tray 1 paper input assembly |
RM1-1097-040CN |
Tray 1 paper input assembly |
RM1-1098-000CN |
Registration roller assembly |
RM1-1098-030CN |
Registration roller assembly |
RM1-1108-000CN |
DC controller board - DC Controller for LaserJet 4250/4350 series |
RM1-1108-060CN |
DC controller board - DC Controller for LaserJet 4250/4350 series |
RM1-1108-130CN |
DC controller board - DC Controller for LaserJet 4250/4350 series |
RM1-1110-000CN |
Transfer roller assembly - Long black spongy roller that transfers charge to paper |
RM1-1122-000CN |
Driver PCA - 500 sheet feeder driver PCA |
RM1-1123-000CN |
Stapler/stacker driver board |
RM1-1124-000CN |
Three bin mail box (MBM) driver board |
RM1-1133-020CN |
Paper pickup roller drive assembly for 1500 sheet feeder |
RM1-1136-000CN |
Lifter drive assembly for 1500 sheet feeder |
RM1-1150-7937CN |
Wireless controller pca |
RM1-1166-000CN |
Paper Full Sensor Assembly - Located On The Stapler/Stacker Middle Assembly - Advice That Tray Reach Full Capacity |
RM1-1189-000CN |
Top bin full sensor cable |
RM1-1190-000CN |
Control panel cable |
RM1-1191-000CN |
Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag |
RM1-1192-000CN |
Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector |
RM1-1193-000CN |
Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector |
RM1-1195-000CN |
Control panel assembly |
RM1-1198-000CN |
Laser cable - Connects between DC Controller board and laser scanner unit - J145 to J83 |
RM1-1216-000CN |
Fuser cable - Main fuser cable for LaserJet 4250 series |
RM1-1216-020CN |
Fuser cable - Main fuser cable for LaserJet 4250 series |
RM1-1218-000CN |
A/C input connector/cable - 120VAC input connector to J1 power supply connector |
RM1-1219-000CN |
A/C input connector/cable - 220VAC input connector to J1 power supply connector |
RM1-1236-000CN |
Cable and connector on top right rear of 500 sheet feeder assembly |
RM1-1237-000CN |
Cable and connector on bottom right rear of 500 sheet feeder assembly |
RM1-1242-030CN |
Engine control unit (ECU) PC board - Control and power supply board for the printer (For 110V to 127V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer |
RM1-1243-000CN |
Egine controlunit (ecu) pc board - control and power supply board for the printer (for 220v to 240v operation) - does not includes the power cord connector or power switch - mounts in the bottom of the printer |
RM1-1243-030CN |
Engine controlunit (ECU) PC board - Control and power supply board for the printer (For 220V to 240V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer |
RM1-1249-000CN |
Power receptacle and switch cable assembly - Includes the power cord receptacle, power switch, and cable assembly - Mounts in the lower rear corner of the right side plate assembly |
RM1-1261-000CN |
PCA assembly - For the 500-sheet paper feeder |
RM1-1262-000CN |
Duplexer control board - Small PC board that mounts just above and to the left of the fan on the right side plate assembly |
RM1-1267-000CN |
Printed circuit board (PCB) sensor assembly - For the optional 500-sheet paper cassette HP M401 Paper Feeder Paper Sensor PCA |
RM1-1281-000CN |
Registration roller assembly - Includes the frame, the two roller assemblies, and the upper transfer guide - Mounts in the front middle of the print engine assembly |
RM1-1281-070CN |
Registration roller assembly - Includes the frame, the two roller assemblies, and the upper transfer guide - Mounts in the front middle of the print engine assembly |
RM1-1283-000CN |
Top sensor assembly - Includes the bracket and flags for the top of page detection sensor (PS912), and paper width detection sensor (PS913) - Mounts behind the registration roller assembly |
RM1-1286-000CN |
Paper feed guide assembly - Support structure to guide the paper into the Fuser Assembly - Ribbed plastic frame with metal guide plate |
RM1-1289-010CN |
Fuser Assembly - Bonds toner to paper with heat - For 110V to 127VAC operation |
RM1-1289-080CN |
Fuser Assembly - Bonds toner to paper with heat - For 110V to 127VAC operation |
RM1-1289-BULK |
Fixing assy 110v |
RM1-1292-080CN |
250-sheet input paper tray (tray 2) assembly - Includes the tray body and front cover assemblies |
RM1-1293-000CN |
Tray front cover assembly - Mounts to the front of tray 2 |
RM1-1293-030CN |
Tray front cover assembly - Mounts to the front of tray 2 (RM1-1294-000CN). |
RM1-1294-000CN |
250-sheet (tray 2) body assembly - Includes everything except for the tray front cover assembly (RM1-1293-030CN). |
RM1-1295-000CN |
Tray 2 rear assy |
RM1-1295-010CN |
Tay 2 rear assy |
RM1-1298-000CN |
Separation pad assembly - Includes the pad and spring located on the arm in the holder frame - Mounts toward the front of the tray 2 |
RM1-1298BULK100 |
Separate holder assy |
RM1-1299-020CN |
Main drive gear assembly - Large plate with ten drive gears and the single sheet priority drive clutch (SL2) - Mounts on the right side plate assembly |
RM1-1300-030CN |
Engine control unit (ECU) PC board assembly - Includes the PC board, bottom pan, and standoffs (For 110V to 127V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer |
RM1-1301-000CN |
Double gear assembly - Includes the gear body, inset gear (both with a toothless area) and compression spring - For driving the paper pickup roller |
RM1-1302-000CN |
Duplexing gear assembly - Includes the normal and reverse rotation gear assemblies, and idler gear mounted on a support bracket - Drives the top output bin and rear rollers |
RM1-1303-000CN |
Normal rotation gear assembly - Includes the internal/external geared body, two planetary gears, outer gear with shaft, and the black ratchet gear |
RM1-1304-000CN |
Reverse rotation gear assembly - Includes the internal/external geared body, two planetary gears, outter gear with shaft, and the White ratchet gear |
RM1-1305-000CN |
Top output gear assembly - Includes three white plastic gears mounted on a support bracket - Drives the top output bin roller |
RM1-1306-000CN |
Paper retainer assembly - Bracket assembly with two flapper levers - Keeps paper in the top output bin from sliding back into the printer |
RM1-1307-020CN |
Front cover set - Includes the toner cartridge access door, single sheet priority input slot door, front cover (between tray 2 and the priority input slot), and the noise absorber |