| Part |
Picture |
Description |
| RB1-1344-000CN |
Bracket - For static eliminator behind separation pad |
| RB1-1385-000CN |
Right arm - Supports front door when printer is opened also actuates interlock switch on power supply |
| RB1-1386-000CN |
Dual pickup roller - Two used on cassette pickup roller assembly |
| RB1-1411-000CN |
Pickup roller - For multipurpose input tray |
| RB1-1438-000CN |
Sensor lever - For Photosensor 402 on front cover connect board |
| RB1-2080-000CN |
Laser shutter - Attaches to bottom of laser/scanner assembly |
| RB1-2105-030CN |
Toner cartridge support - Black plastic bar that attaches above the toner cartridge |
| RB1-2107-000CN |
Cassette guide - Paper cassette assembly support |
| RB1-2114-000CN |
Rubber foot - Non-slip replacement rubber foot |
| RB1-2118-000CN |
Base structure - For the power switch actuator assembly - Does NOT include the power switch |
| RB1-2119-000CN |
Power switch button (Rocker) |
| RB1-2125-000CN |
Latch holder (White) - for MP tray/front door |
| RB1-2126-000CN |
Pickup roller (Quarter circle shaped) - For upper cassette |
| RB1-2127-000CN |
Pickup roller (Oval shaped) - For multipurpose tray |
| RB1-2131-000CN |
Paper guide (Plastic piece with ribs) - Guides paper out of tray 1 |
| RB1-2133-000CN |
Paper out sensor arm |
| RB1-2138-000CN |
Top cover interlock lever - Engages switch on paper control board |
| RB1-2141-000CN |
Inner cover plate - Removed when installing envelope feeder |
| RB1-2143-000CN |
Multi-Purpose tray extension |
| RB1-2181-000CN |
Guide roller holder (U-shaped) - In center of paper feed assembly |
| RB1-2182-000CN |
HP guide roller designed for the paper feed assembly of various HP LaserJet printers. It ensures proper paper tracking typically located in the center of the feed mechanism ensuring reliable paper handling and feeding. |
| RB1-2190-000CN |
Pickup roller spring hook |
| RB1-2204-000CN |
Pickup roller (Quarter circle shaped) - For upper cassette |
| RB1-2205-000CN |
Pickup roller (oval shaped) - Located in multipurpose paper tray pickup assembly |
| RB1-2226-000CN |
High voltage cover - Plastic Pan for high voltage board |
| RB1-2236-000CN |
Feeder guide - Ribbed (Gray) metal plate at top of printer |
| RB1-2237-020CN |
Brush - Static eliminating |
| RB1-2253-000CN |
Guide roller - Fits on paper guide/high voltage contact plate |
| RB1-2259-040CN |
Rear paper holder - Attaches to bottom of high voltage cover |
| RB1-2260-000CN |
Cleaning brush - For cleaning the antistatic teeth |
| RB1-2263-000CN |
Fusing roller - Hollow roller - Heat lamp goes in its core |
| RB1-2264-000CN |
Lower pressure roller - Hard rubber roller - Located in Fuser Assembly |
| RB1-2299-030CN |
Delivery roller - Double roller in paper output assembly |
| RB1-2302-000CN |
Delivery roller spring (U-shaped) |
| RB1-2322-000CN |
Door - On top of printer - Lift-up printer access cover |
| RB1-2335-000CN |
Rear door latch |
| RB1-2343-000CN |
SIMM access cover plate - Mounts on formatter shield assembly |
| RB1-2346-000CN |
Right side cover |
| RB1-2347-000CN |
Left side cover |
| RB1-2351-000CN |
MP door - On front panel - Does NOT include tray extension |
| RB1-2352-000CN |
Power switch rod - From main switch assembly to power supply |
| RB1-2354-000CN |
Support strap for rear door - Supports door when open |
| RB1-2366-000CN |
Empty slot cover - For option board - Attaches to the I.O panel |
| RB1-2370-020CN |
Stop plate - For paper length in 250 page universal cassette |
| RB1-2615-000CN |
Cassette sensor arm |
| RB1-2616-000CN |
Guide roller - Mounts in the lower cassette base assembly |
| RB1-2620-000CN |
Rubber foot - Replacement rubber foot for the bottom of the (optional) lower cassette base |
| RB1-2627-020CN |
Weight - Clips on to paper pickup drive shaft of the lower cassette base drive assembly |
| RB1-2632-000CN |
Pickup roller (oval shaped) - Located in the lower cassette base assembly |
| RB1-2632-020CN |
Pickup roller (oval shaped) - Located in the lower cassette base assembly |
| RB1-2650-000CN |
Pickup roller (oval shaped) - Located in the lower cassette base assembly |
| RB1-2974-000CN |
Grounding plate - for the gear train assembly |
| RB1-2976-000CN |
Light pipe - To 4 top cover indicators - LEDS on formatter board |
| RB1-2977-000CN |
I/O door - On left side - Access for connecting I/O cable |
| RB1-2978-000CN |
Power cord door - On right side - Access for power cord |
| RB1-2979-000CN |
Memory door - On left side - Access to optional memory |
| RB1-2981-000CN |
Fuser release lever (Aqua) - For clearing paper jams |
| RB1-2987-020CN |
High voltage shield - Has cutout for modified paper sensor arm |
| RB1-3001-000CN |
Rubber foot for HP LaserJet 4L Series |
| RB1-3002-040CN |
Top door latch bar |
| RB1-3029-000CN |
Pickup roller (D-shaped) - In pickup assembly |
| RB1-3097-000CN |
Paper exit (flag) lever - For the exit sensor |
| RB1-3100-000CN |
Lower pressure roller - Hard rubber roller - Located in Fuser Assembly |
| RB1-3103-000CN |
Exit roller - Shaft with 3 rubber rollers - Located in Fuser Assembly |
| RB1-3107-000CN |
Plastic roller (Clear) - Part of the delivery assembly |
| RB1-3108-000CN |
Delivery roller retaining spring |
| RB1-3109-000CN |
Conductive roller - Tire like roller that mounts on end of pressure roller shaft (Next to drive gear) |
| RB1-3128-000CN |
Reset button (Purple) |
| RB1-3129-000CN |
Top door - Flip up door allows access to toner cartridge |
| RB1-3132-000CN |
Lock button (purple) - Unlocks top cover door |
| RB1-3133-000CN |
Lock button guide (Purple) - Cylindrical guide for button |
| RB1-3138-000CN |
Torsion spring for back door assembly |
| RB1-3142-000CN |
Paper size guide/stop - For universal paper cassette tray |
| RB1-3151-000CN |
Plastic side spring (clear) - Holds cassette tray in printer |
| RB1-3332-000CN |
Top door - Flip up door allows access to toner cartridge |
| RB1-3339-000CN |
Paper out lever (yellow) - Front right corner of paper tray |
| RB1-3341-000CN |
Legal tray extension (Green) - Rear of paper tray |
| RB1-3352-000CN |
Font door - In front left corner of printer |
| RB1-3353-000CN |
Font door hinge bracket - In front left corner of printer |
| RB1-3354-020CN |
SIMM cover - Located on the left side for access to optional memory |
| RB1-3356-000CN |
Lock button - Unlocks top cover door |
| RB1-3357-000CN |
Lock button guide (Purple) - Cylindrical guide for button |
| RB1-3368-000CN |
Pickup roller (D-shaped) - In pickup assembly |
| RB1-3389-000CN |
Velcro - L shaped (mirror brush fastener) |
| RB1-3470-000CN |
Right side cover |
| RB1-3471-000CN |
Left side cover |
| RB1-3474-000CN |
Door - On top of printer - Lift-up printer access cover |
| RB1-3477-000CN |
Pickup roller (Quarter circle shaped) - For upper cassette |
| RB1-3481-020CN |
Cover for gear cluster (Main Drive train) assembly - Attached to the main motor |
| RB1-3516-020CN |
Fusing roller - Hollow roller - Heat lamp goes in its core |
| RB1-3517-030CN |
Lower pressure roller - Hard rubber roller - Located in Fuser Assembly |
| RB1-3558-000CN |
Multi-Purpose tray extension for feeding paper into tray 1. |
| RB1-3559-000CN |
MP door - On front panel - Does NOT include tray extension |
| RB1-3560-000CN |
Latch holder (Black) - For MP tray/front door |
| RB1-3701-000CN |
I/O door - On left side - Access for connecting an interface cable |
| RB1-5467-000CN |
Static dissipater - Located underneath main top cover |
| RB1-5557-000CN |
Right slide rail - For main logic (Formatter) board |
| RB1-5558-000CN |
Left slide rail - For main logic (Formatter) board |
| RB1-5562-000CN |
Rear cover for HP LaserJet 4V Series |
| RB1-5563-000CN |
Left side cover - Has vent for exhaust fan |
| RB1-5575-000CN |
Rear cassette cover - Attaches between the left and right foor assemblies on the bottin if the printer |
| RB1-5785-000CN |
Support panel - For main logic (formatter) board |
| RB1-5788-000CN |
Thumbscrew - Attaches panel to main logic (Formatter) board |
| RB1-5906-000CN |
Fuser release lever - For clearing paper jams |
| RB1-5910-030CN |
Lower pressure roller - Hard rubber roller in Fuser Assembly |
| RB1-5917-000CN |
Exit roller - Shaft with 3 rubber rollers - Located in Fuser Assembly |
| RB1-5918-000CN |
Delivery cover Attaches to the top of the Fuser Assembly |
| RB1-5931-000CN |
Main top cover/case assembly - Top door NOT included |
| RB1-5934-000CN |
Interface connector cover - Attaches to the left side cover |
| RB1-5935-000CN |
Lock button - Unlocks top cover door |
| RB1-5936-000CN |
Top cover door lock button guide |
