Part |
Picture |
Description |
RC1-3948-000CN |
Left front guide - Small black plastic piece on front left side of chassis in Tray 2 cassette guide slot |
RC1-3949-000CN |
Left middle guide - Small black plastic cassette guide on left side of printer |
RC1-3950-000CN |
Cassette guide - Rear left black plastic paper cassette guide |
RC1-3951-000CN |
Cassette guide - Right front side black plastic paper cassette guide |
RC1-3953-000CN |
Cassette guide - Right rear black plastic paper cassette guide |
RC1-3954-000CN |
Gear cover - Covers fusing and duplexer gears on lower right rear of printer |
RC1-3955-000CN |
Solenoid holder/mount - Solenoid mount for solenoid SL2 |
RC1-3984-000CN |
Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge |
RC1-3994-000CN |
Face down roller - Small individual feed roller that rides against face down shaft roller - Held by torsion spring - Four used |
RC1-3995-000CN |
Torsion spring - Provides tension and holds small individual feed roller that rides against face down shaft roller - Four used |
RC1-3996-000CN |
Delivery roller - Small paper delivery rollers at top rear of printer - Four used |
RC1-3998-000CN |
Roller holder - Holder for small paper delivery rollers at top rear of printer - Four used |
RC1-4000-000CN |
Cable cover - Fuser cable cover - Black plastic cover that protects cable in left rear portion of printer |
RC1-4006-000CN |
Cable guide - Small black plastic tray that supports and protects cables that go across rear of printer behind laser scanner |
RC1-4009-000CN |
Plate holder - Holds the left rear corner of the paper access plate (duplex pan) |
RC1-4011-000CN |
Delivery roller - Face down output roller |
RC1-4025-000CN |
Static charge eliminator - Comb that mounts above upper delivery roller that dissipates static charge as paper exits printer |
RC1-4027-000CN |
Sensor lever - Top of page sensor flag - Used to detect edge of paper |
RC1-4028-000CN |
Torsion spring - Provides tension for top of page sensor flag |
RC1-4055-000CN |
Door arm - White plastic arm that connects to left side cartridge access door |
RC1-4056-000CN |
Door arm guide - White plastic guide for cartridge door lever |
RC1-4057-000CN |
Tray hinge - Left side hinge for drop down Tray 1 assembly |
RC1-4058-000CN |
Tray hinge - Right side hinge for drop down Tray 1 assembly |
RC1-4059-000CN |
Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Rear cartridge contact spring |
RC1-4060-000CN |
Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge |
RC1-4061-000CN |
Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Front cartridge contact spring |
RC1-4065-000CN |
Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed |
RC1-4066-000CN |
Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge |
RC1-4066-020CN |
Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge |
RC1-4066-050CN |
LEVER, GROUNDING CONTACTLEVER, GROUNDING CONTACT Replaced: RC1-4066-000CN |
RC1-4067-000CN |
Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge |
RC1-4067-030CN |
Spring, Leaf |
RC1-4069-000CN |
Sheet static charge - Goes on the lower transfer guide assembly - Dissipates static charge from paper. |
RC1-4070-000CN |
Sheet static charge - Dissipates static charge from paper |
RC1-4081-000CN |
Bushing for HP HP LaserJet M3027 MFP |
RC1-4083-000CN |
Papre guide - Paper guide under registration roller assembly |
RC1-4085-000CN |
Grounding plate - High voltage power supply grounding plate - Attaches to left rear of power supply |
RC1-4096-000CN |
Guide assembly - Duplexer portion paper input guide assembly |
RC1-4105-000CN |
Inner bushing - Bushing that large white 201 tooth drive gear rides on |
RC1-4106-000CN |
Upper right toner cartridge guide |
RC1-4106-020CN |
Upper right toner cartridge guide |
RC1-4107-000CN |
Cartridge guide - Lower right side toner cartridge guide |
RC1-4108-000CN |
Cover for main motor M1 - Located on lower right side of printer |
RC1-4113-000CN |
Right base plate - Metal plate under right side of printer |
RC1-4114-000CN |
Cam - Located between large white 201 tooth gear and drive release lever |
RC1-4115-000CN |
Coupling lever - White plastic lever between large white gear cam and drive release assembly |
RC1-4116-000CN |
Drive release lever - |
RC1-4117-000CN |
Drive release link - |
RC1-4121-000CN |
Left upper toner cartridge guide |
RC1-4121-020CN |
Left upper toner cartridge guide |
RC1-4122-000CN |
Left lower toner cartridge guide |
RC1-4123-000CN |
Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge |
RC1-4123-020CN |
Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge |
RC1-4125-000CN |
Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly |
RC1-4126-000CN |
Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly |
RC1-4127-000CN |
Reader holder - E-label reader holder - Housing that holds cartridge E-label reader |
RC1-4128-000CN |
Plastic duct that vents air from the lower right front fan to the laser/scanner. |
RC1-4128-020CN |
Plastic duct that vents air from the lower right front fan to the laser/scanner. |
RC1-4129-000CN |
Small vent duct to route air from the fan (FM2) to the cartridge area |
RC1-4130-000CN |
Air duct - Inside half of air duct from fan FM2 in lower right front corner of printer -Black plastic |
RC1-4131-000CN |
Air duct - Outside half of air duct from fan FM2 in lower right front corner of printer -Black plastic |
RC1-4132-000CN |
Test switch lever - Mechanical link to test engine switch |
RC1-4133-000CN |
Main fan holder - Plastic fan holder for main cooling fan FM1 - Located lower right front side |
RC1-4134-000CN |
Fan holder - FM2 fan holder housing |
RC1-4135-000CN |
Latch Plate - For front door snap |
RC1-4136-000CN |
Protective plate - |
RC1-4137-000CN |
Contact cam - Vertical piece that inserts into protective plate |
RC1-4137-020CN |
Contact cam - Vertical piece that inserts into protective plate. |
RC1-4138-000CN |
Cartridge lever - Link that pushes contact cam and protective plate when cartridge is inserted |
RC1-4140-000CN |
Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed |
RC1-4148-000CN |
Left cover - Left side of printer plastic cover |
RC1-4150-000CN |
Right side cover - Removable right side cover for access to DIMM memory |
RC1-4151-000CN |
Right front cover - Right front corner of printer cover |
RC1-4156-000CN |
Right rear cover - Vertical cover at right rear of printer - Covers power input and I/O connectors |
RC1-4157-000CN |
Right lower cover - Small cover under slide out DIMM access cover |
RC1-4158-000CN |
Legal dust cover - For tray 2 |
RC1-4159-000CN |
Right top cover - Right side top case piece behind control panel |
RC1-4168-000CN |
Guide f.f.c. for HP LaserJet 2430 Printer |
RC1-4169-000CN |
Switch link holder - Supports mechanical link between power button and ECU board |
RC1-4170-000CN |
Switch link - Mechanical link between power button and ECU board |
RC1-4172-000CN |
Sheet insulation |
RC1-4173-000CN |
Power switch - Located at lower right rear side of printer |
RC1-4185-000CN |
Compression spring - Spring under transfer plate that provides electrical connection to transfer plate |
RC1-4189-000CN |
Gear stopper - Small bushing between right side of registration assembly and registration roller drive gear |
RC1-5520-000CN |
Rear cover assembly - Stamped metal plate - Covers the upper rear of the printer |
RC1-5524-000CN |
Left side cover - Has cutouts for the power cord receptacle and power switch |
RC1-5533-000CN |
Cartridge Door |
RC1-5629-000CN |
Cover left for HP LaserJet 1018 Series |
RC1-7019-000CN |
Right upper gear cover - Located next to the right lower cartridge giude |
RC1-7020-000CN |
Gear assembly cover - Cover for top of lower right gear assembly. |
RC1-7021-000CN |
Grounding plate - Provides grounding for the photo interrupter |
RC1-7022-000CN |
Door stop guide - Cartridge door stop guide - Allows the cartridge door to open to maximum open position - Supports cartridge door stopper on left side. |
RC1-7023-000CN |
Door stop - Cartridge door stop arm - Also connects to fuser release lever arm |
RC1-7047-000CN |
Cover : Delivery roller cover - Small plastic cover for each of the paper delivery rollers - Four used. |
RC1-7051-000CN |
Left side cover assembly |
RC1-7052-000CN |
Left front corner cover |
RC1-7080-000CN |
Paper sensor cover - Cover for paper sensor flag on 250 sheet paper cassette. |
RC1-7118-000CN |
Dust cover - for HP LaserJet 5200 series |
RC1-7121-000CN |
Cartridge guide - Front left side toner cartridge guide |
RC1-7122-000CN |
Paddle for HP LaserJet Mxxxx mfp |
RC1-7123-000CN |
Torsion spring - Located on the left cartrige guide - Spring that is used for the movement of the left cartridge guide |
RC1-7124-000CN |
Grounding spring - Used inside the print engine |
RC1-7125-000CN |
Torsion spring - Provides torsion to the paddle of the left cartridge guide |
RC1-7126-000CN |
Compression spring - Used in the side plate inside the print engine |
RC1-7126-020CN |
Compression spring - Used in the side plate inside the print engine |
RC1-7127-000CN |
Compression spring - Fuser bias contact for fuser grounding |
RC1-7127-010CN |
Spring Compression |
RC1-7128-000CN |
Contact holder - Holds the bias contact for fuser grounding. |
RC1-7129-000CN |
Transfer drive side plate - Plate that holds the 33-tooth gear, 35-tooth gear, 25-tooth gear, and the bushing |
RC1-7141-000CN |
Cap, paper feed guide |
RC1-7144-000CN |
Loop sensor flag - Tracks the paper tension during its movement in the paper path of the printer |