Part |
Picture |
Description |
RM1-2912-000CN |
Lifter drive assembly for 500 sheet feeder |
RM1-2912-030CN |
Lifter drive assembly - For 500 sheet feeder |
RM1-2924-000CN |
Duplexing sensor cable |
RM1-2925-000CN |
Interface cable (duplexer) |
RM1-2926-000CN |
Power supply assy 110v |
RM1-2926-030CN |
Low voltage power supply PC Board - 100/127VAC 60Hz |
RM1-2926-110CN |
Power Supply Assy |
RM1-2951-000CN |
Power supply assy 200v |
RM1-2951-030CN |
Low voltage power supply PC Board - 220-240VAC, 50Hz |
RM1-2951-140CN |
Power Supply Assy |
RM1-2957-000CN |
High voltage pcb 110v |
RM1-2957-010CN |
High voltage power supply PC board - 110-127VAC input voltage |
RM1-2957-020CN |
High voltage power supply PC board - 110-127VAC input voltage |
RM1-2958-000CN |
High voltage pcb 220v |
RM1-2958-010CN |
High voltage power supply PC Board - 220/240VAC input voltage |
RM1-2958-020CN |
High voltage power supply PCA assembly - For 220/240 VAC input voltage |
RM1-2962-000CN |
Delivery drive assembly |
RM1-2963-000CN |
Fuser drive assembly - Includes the two support plates, drive gears, and motor (M2) |
RM1-2963-040CN |
Fuser/Fixing drive assembly - Includes the two support plates, drive gears, and motor (M2) |
RM1-2968-000CN |
Back end sensor assembly - Includes block sensor, grounding spring, and push switch |
RM1-2969-000CN |
Lifter drive assembly - Includes photosensor, grounding plate, push switch, front gear box, rear gear box, gears, springs, E-ring, lifter plate, input gear shaft, cassette size cable, and screws |
RM1-2970-000CN |
Cassette support rail assembly - Left side tray 2 support rail assembly |
RM1-2971-000CN |
Cassette support rail assembly - Right side tray 2 support rail assembly |
RM1-2972-000CN |
Lower drive assembly - Includes lower drive plate, 43/26 tooth gear, 14/14 tooth gear, and 29 tooth gear |
RM1-2973-000CN |
Fuser pressure release assembly - Includes pressure release frame, front and rear fixed plate, front and rear cam, front and rear arm, front and rear lever, springs, intermediate guide assembly, screws, pressure release shaft, shaft lock and roller |
RM1-2976-000CN |
Upper cassette paper pickup assembly |
RM1-2977-000CN |
Lower cassette paper pickup assembly |
RM1-2978-000CN |
250-sheet upper paper cassette tray 2 assembly |
RM1-2979-000CN |
250-sheet lower paper cassette tray 3 assembly |
RM1-2983-000CN |
Separation block assembly - Includes separation roller assembly, springs, E-rings, separation block shaft, separation block roller, separation block holder, separation roller base, and separation roller block cover |
RM1-2984-000CN |
Cartridge door assembly - Provides access to the cartridges. Cart door assy for HP LaserJet Mxxxx mfp |
RM1-2984-030CN |
Cartridge door assembly - Provides access to the print cartridges |
RM1-2987-000CN |
Paper delivery assembly |
RM1-2987-020CN |
Paper delivery assembly |
RM1-2990-000CN |
Left door assembly - Includes flapper pad, left door, facedown guide, left door handle, compression spring, and screw |
RM1-2991-000CN |
Right door assembly - For the print engine - Located below the cartridge access door |
RM1-2994-000CN |
Power supply PC board assembly - 110û127 VAC input voltage |
RM1-2994-040CN |
Power supply PC board assembly - 110–127 VAC input voltage |
RM1-2995-000CN |
Connecting PCA assembly - Includes IS connecting PCA assembly, formatter guide plate, formatter guide cap plate, flexible flat cable guide, DINN board support, video interface PCA assembly, and screws |
RM1-2995-010CN |
Connecting PCA assembly - Includes IS connecting PCA assembly, formatter guide plate, formatter guide cap plate, flexible flat cable guide, DINN board support, video interface PCA assembly, and screws |
RM1-2998-000CN |
Paper pickup roller assembly - For the lower cassette pickup assembly |
RM1-2999-000CN |
Tag holder assembly - Includes connector holder tag, holder plate, compression spring, and memory contact cable |
RM1-3001-000CN |
Registration roller assembly - Includes the roller, bushings, mounting plate, transfer upper guide, left and right registration side plate, registration roller shaft, and upper transfer sheet guide |
RM1-3006-000CN |
Power supply PC board assembly - 220û240 VAC input voltage |
RM1-3006-040CN |
Power supply PC board assembly - For 220/240 VAC input voltage |
RM1-3007-000CN |
Fuser Assembly - For 110 VAC - Bonds toner to paper with heat |
RM1-3007-040CN |
Fusing assembly - For 110 VAC - Bonds toner to paper with heat |
RM1-3008-000CN |
Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
RM1-3008-040CN |
Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
RM1-3009-000CN |
Paper feed assembly - Include plate, bushings, covers, springs, static charge eliminator, rollers, transfer insulating sheet,and guide |
RM1-3043-000CN |
Paper pickup assembly - Complete assembly that paper pickup roller mounts in |
RM1-3044-000CN |
Fuser Assembly - Bonds the toner to the paper with heat - For 110VAC to 127VAC operation - Mounts to the upper rear of the print engine assembly |
RM1-3045-000CN |
Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC to 240VAC operation - Mounts to the upper rear of the print engine assembly |
RM1-3045-020CN |
Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC to 240VAC operation - Mounts to the upper rear of the print engine assembly |
RM1-3059-000CN |
Delivery tray assembly - Paper output tray for LaserJet 3050/3052/3055 AIO series printers |
RM1-3060-000CN |
Paper input tray - Top multi-purpose paper input tray - Holds ten sheets of paper |
RM1-3063-000CN |
Paper scanner frame assembly - Includes all paper scanner parts except scanner top cover and control panel |
RM1-3066-000CN |
Scanner guide assembly - LaserJet 3050AIO scanner paper guide assembly |
RM1-3068-000CN |
Rm1-3068-000cn |
RM1-3076-000CN |
Left scanner cover - Mounts on the left end of the scanner assembly |
RM1-3076-020CN |
Left scanner cover - Mounts on the left end of the scanner assembly |
RM1-3077-00CN |
Scanner right cover assembly |
RM1-3077-020CN |
Right side cover assembly for paper scanner assembly |
RM1-3087-000CN |
Interlock assembly - Includes interlock switch holder, and fron door switch cable |
RM1-3088-000CN |
Paper feed assembly - For the stapler/stacker unit |
RM1-3092-000CN |
Stapling unit - Stapler assembly for the stapler/stacker unit - Includes holder, screws, stapler unit and clinch guide |
RM1-3093-000CN |
500-sheet output bin - For the stapler/stacker unit |
RM1-3094-000CN |
Stapler cartidge cover - Located on the right side of the stapler/stacker main assembly |
RM1-3095-000CN |
Rear cover assembly - For the stapler/stacker main body assembly - Includes the front frame shield plate |
RM1-3098-000CN |
Alignment assy for HP LaserJet Mxxxx mfp |
RM1-3099-000CN |
Jog guide assembly - Mechanical device that prevents sheets for jogging with the holding platform |
RM1-3402-000CN |
Power supply assembly - Includes the power supply board with integrated power switch and power cord receptacle - For 110VAC to 127VAC operation |
RM1-3403-000CN |
Power supply assembly - Includes the power supply board with integrated power switch and power cord receptacle - For 220VAC to 240VAC operation |
RM1-3404-000CN |
Engine control unit (ECU) PC board - Controller board - Provides control logic for the printer mechanical functions |
RM1-3410-000CN |
Speaker assembly - Mounted on right front side of printer - Speaker SP1 |
RM1-3419-000CN |
Scanner paper input tray assembly |
RM1-3459-000CN |
DC controller PCA assembly - For Laserjet M5025/M5035 series |
RM1-3459-010CN |
DC controller board - DC Controller for LaserJet M5025/M5035 series |
RM1-3459-030CN |
DC controller board - DC Controller for LaserJet M5025/M5035 series |
RM1-3471-000CN |
Door switch - Indicates when toner cartridge door is open |
RM1-3474-000CN |
Door switch - Indicates when fuser door is open |
RM1-3575-000CN |
Paper pick-up option cable - Used for the 1 x 500-sheet input tray |
RM1-3641-000CN |
Paper feed printed circuit assembly (PCA) - Located on the rear part of the high capacity input (HCI) feeder main body |
RM1-3641-030CN |
Paper feed PCA assembly - Located on the rear part of the high capacity input (HCI) feeder main body |
RM1-3647-000CN |
Multi-sensor cable - Used for the 3 x 500-sheet paper feeder tray |
RM1-3651-000CN |
Door open switch cable - Used for the 3 x 500-sheet paper feeder tray |
RM1-3712-000CN |
Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly. |
RM1-3714-000CN |
Gear - Pick up roller gear assembly |
RM1-3715-000CN |
Registration roller assembly |
RM1-3716-000CN |
Roller Assembly : Multi-purpose tray pickup roller assembly - Includes pickup roller, roller cam, right and left cams, both round rollers and dowel pin. |
RM1-3717-000CN |
Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear |
RM1-3717-020CN |
Fuser assembly - For 110 VAC - Bonds toner to paper with heat |
RM1-3720-000CN |
Top cover assembly - Mounts on the top of the printer holds the paper when it is printed |
RM1-3720-020CN |
Top cover assembly - Mounts on the top of the printer holds the paper when it is printed |
RM1-3721-000CN |
Left cover assembly |
RM1-3722-000CN |
Cartridge access door assembly - Provides access to the cartridges |
RM1-3723-000CN |
Multi-purpose input tray cover assembly - Includes pull-out and flip-out tray extensions. |
RM1-3724-000CN |
Rear cover assembly - Includes rear door assembly |
RM1-3725-000CN |
Control panel assembly - Includes the display mounted on the right top side of the printer |
RM1-3727-000CN |
Bottom support plate for the roller assembly |
RM1-3730-000CN |
Engine controller assembly - Engine controller PC board and metal pan - 110VAC/127VAC |
RM1-3730-060CN |
Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan |
RM1-3731-000CN |
PC Board : Engine controller assembly - Engine controller PC board and metal pan - 220VAC/240VAC |
RM1-3731-060CN |
Engine controller assy, Engine controller PC board assembly and metal pan - For 220 VAC to 240 VAC operation |
RM1-3732-000CN |
500-sheet input tray - Paper cassette for tray 2. (RM1-3796-000CN is tray# 3) |
RM1-3738-000CN |
Tray 1 and 2 separation pad and holder assembly. |
RM1-3740-000CN |
Fusing assembly - Bonds toner to paper by heat - For 110VAC to 127VAC operation |
RM1-3740-030CN |
Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat |
RM1-3741-000CN |
Fuser Assembly - For 220 VAC to 240 VAC, 50Hz operation - Bonds toner to paper by heat |
RM1-3741-030CN |
Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat |
RM1-3742-000CN |
Face down full detect flag assembly - Goes on the right side of the top cover assembly |