| Part |
Picture |
Description |
| PA03002-C109FJ |
ADF motor unit - Drives ADF rollers |
| PA03002-C110FJ |
Sensor assembly - Includes eight sensors, sensor cable and sensor mount assembly |
| PA03002-C111FJ |
ADF belt - Drives automatic document feeder rollers |
| PA03002-C112FJ |
Pickup roller assembly cover |
| PA03002-C113FJ |
Carrier unit assembly - Holds optical scanner for flatbed scanner portion of copier |
| PA03002-C114FJ |
Lower lamp - Front side of carrier unit |
| PA03002-C115FJ |
Upper lamp - Lamp in upper portion of ADF unit |
| PA03002-C116FJ |
Carrier unit motor |
| PA03002-C117FJ |
Upper scanner portion of ADF unit - Scans page as it feeds through the ADF - Provides double sided copies |
| PA03002-C118FJ |
PC board cooling fan assembly |
| PA03002-C119FJ |
Back board - Connects control PCA and copy processor PCA |
| PA03002-C120FJ |
Pick roller assembly |
| PA03002-C121FJ |
Output tray assembly - ADF output tray with flip-out paper support tray extender |
| PA03002-C122FJ |
Separation pad assembly |
| PA03002-C123FJ |
Paper guide / pick roller cover thumbscrew |
| PA03002-C125FJ |
Front panel cable - Between front panel and junction PCA |
| PA03002-C126FJ |
LED assembly - Status display with cable - Green LED that indicates when paper is correctly loaded in ADF |
| PA03002-C201FJ |
Latch cap - ADF cover latch cap |
| PA03002-C202FJ |
RFI cover shield for PC boards |
| PA03002-C203FJ |
DC cable - From power supply to copier logic board |
| PA03002-C204FJ |
Carrier flex cable - From carrier unit to junction PCA |
| PA03002-C205FJ |
Carrier rail - Carrier unit front support rail |
| PA03002-C206FJ |
Rail bushing - Carrier unit support bushing |
| PA03002-C207FJ |
Home postion sensor - Senses when carrier unit is parked in the home position |
| PA03002-C208FJ |
Frame ground spring |
| PA03002-C209FJ |
Idle roller coil spring - Provides tension for idle roller |
| PA03002-C210FJ |
Carrier tension pulley - Carrier belt idler pulley |
| PA03002-C211FJ |
Carrier tension pulley shaft |
| PA03002-C212FJ |
Carrier spring - Provides tension for carrier belt pulley |
| PA03002-C213FJ |
Carrier tension pulley spacer |
| PA03002-C214FJ |
Carrier tension pulley collar - Sleeve that carrier pulley tension spring slides over |
| PA03002-C218FJ |
Rubber foot - Replacement rubber foot for the bottom of the printer (four used) |
| PA03002-C219FJ |
Glass plate assembly - Copier flatbed glass, frame and lower ADF exit roller assembly |
| PA03002-C222FJ |
Output tray bracket - Rear ADF output tray mount |
| PA03002-C223FJ |
Output tray bracket - Front ADF output tray mount |
| PA03002-C224FJ |
Exit idle roller |
| PA03002-C225FJ |
V2 HK ring - Special application spacer |
| PA03002-C226FJ |
Document cover rubber stop |
| PA03002-C227FJ |
Optical unit tie down/hold-down bracket |
| PA03002-C228FJ |
Sensor cable - Connects ADF sensors to copier control board |
| PA03002-C229FJ |
CCD cable - From control PCA to CCD PCA on optical unit |
| PA03002-C230FJ |
Drive roller shaft - Two used |
| PA03002-C231FJ |
Drive roller gear |
| PA03002-C232FJ |
Reduction cluster gear |
| PA03002-C233FJ |
Drive roller bearing - Front drive roller bearing |
| PA03002-C234FJ |
Sensor arm - Detects leading edge of ADF paper input |
| PA03002-C235FJ |
Sensor arm - Paper sensor arm for ADF |
| PA03002-C236FJ |
Pad assembly frame - Supports separation pad assembly |
| PA03002-C240FJ |
Pick spring - Provides pressure for separation pad |
| PA03002-C241FJ |
Key washer for HP LaserJet 8150 Series |
| PA03002-C245FJ |
ADF latch spring - Holds tension on ADF release latch |
| PA03002-C246FJ |
Paper antistatic brush assembly |
| PA03002-C247FJ |
Front ADF lift spring |
| PA03002-C248FJ |
Rear ADF lift spring |
| PA03002-C249FJ |
Leaf spring - Idle roller leaf spring |
| PA03002-C250FJ |
Pickup roller clutch/gear assembly |
| PA03002-C251FJ |
Carrier unit lamp PCA |
| PA03002-C252FJ |
ADF unit lamp PCA |
| PA03002-C256FJ |
Carrier unit dust cover |
| PA03002-C257FJ |
Front bracket - Front panel support bracket |
| PA03002-C259FJ |
Lubrication applicator - Carrier unit rail lubricator |
| PA03002-C260FJ |
Paper chute flip out - Flip out paper tray extension |
| PA03002-C262FJ |
Ferrite core - Attaches to the carrier ribbon cable |
| PA03002-C263FJ |
ADF output tray extender - Flip-out tray extender |
| PA03002-C264FJ |
Control panel cover |
| PA03002-C265FJ |
Drive roller bearing - Rear drive roller bearing |
| PA03002-C266FJ |
Ground spring - Front panel frame ground spring |
| PA03002-C267FJ |
Junction PCA cover - Protects junction PCA |
| PA03002-C269FJ |
Pick roller brass bushings - Supports pickup roller |
| PA03002-C270FJ |
Front panel cable cover - Protects front panel cable |
| PF2282K008NI |
Hinge assembly - ADF right side hinge assembly |
| PF2282K034NI |
ADF separation pad frame assembly - Includes the full width support structure and the ADF separartion pad assembly - Mounts in the top of the ADF assembly at the back of the input tray |
| PF2282K035NI |
ADF paper seperation pad assembly - Mounts in the center of the ADF separation pad frame assembly at the rear part of the paper input tray |
| PF2282K039NI |
ADF paper pickup roller assembly - Includes the pickup roller, separation roller, and drive gear mounted in a frame - Mounts on the bottom of the ADF cover assembly (above the input paper tray) |
| PF2282K040NI |
Pickup roller cover - `C` shaped plastic cover that surrounds the paper pickup roller assembly - Mounts on the bottom of the ADF cover assembly |
| PF2282K041NI |
Hinge assembly - ADF left side hinge assembly |
| PF2282K042NI |
ADF input tray assembly |
| PF2282K043NI |
Mylar holder assembly - This is the cover (holder) that holds the Clear mylar sheet in place - Mounts on the bottom of the ADF assembly |
| PF2282K164NI |
Access latch - ADF jam accesss latch |
| PF2282K165NI |
LaserJet ADF to scan control board cable |
| PF2282K166NI |
ADF hinge flap - ESD hinge cover for ADF assembly |
| PF2282P025NI |
White backing plate assembly - Used as a white background for scanning documents when passing through the ADF assembly - Mounts on the underside of the ADF assembly towards the rear |
| PF2282P039NI |
Gear - Pick up gear |
| PF2282P041NI |
Jam access cover - Top access cover for ADF assembly |
| PF2282P044NI |
ADF cover - Plastic rear cover for ADF assembly |
| PF2282P058NI |
Left cover - left external cover for ADF unit |
| PF2282P059NI |
ADF cover - Plastic front cover for ADF assembly |
| PF2282P060NI |
Cover - ADF output tray bottom cover |
| PF2282P061NI |
Paper stop - ADF output tray paper stop |
| PF2282P339NI |
ADF white plastic scanner background plate - Used as a white background during flatbed document scanning - Mounts on the underside of the ADF assembly (above the scanner assembly) |
| PF2282P343NI |
Compression spring - Holds the white mylar backing plate firmly against the document passing through the ADF assembly (Two used) |
| PF2282P352NI |
Cover spring - Provides tension for left side plastic cover of ADF assembly - Two used |
| PF2282P353NI |
Paper guide - ADF clear plastic paper guide |
| PF2282-SVPNI |
ADF assembly - For LaserJet 4345MFP - Includes ADF rear cover ADF cable ADF input tray ADF front cover ADF mylar replacement kit ADF white scan background ADF mylar holder assembly ADF white mylar backing with 2 springs ADF left cover screw 4x10 |
| PF2282-SVPNR |
ADF assembly - For LaserJet 4345MFP - Includes ADF rear cover ADF cable ADF input tray ADF front cover ADF mylar replacement kit ADF white scan background ADF mylar holder assembly ADF white mylar backing with 2 springs ADF left cover screw 4x10 |
| PF2288K050NI |
Three ADF mylar replacement kit - Includes three clear mylar replacement strips for the ADF guide - Mounts in the ADF mylar holder assembly |
| PF2309K102NI |
Automatic document feeder (ADF) base assembly |
| PF2309K103NI |
Paper path guide assembly - Mechanism located on the automatic document feeder (ADF) - Where paper path trough and it is scaned |
| PF2309K104NI |
Left counterbalance hinge - For the automatic document feeder (ADF) assembly |
| PF2309K105NI |
Jam door assembly - Pull up door that provides access to the automatic document feeder (ADF) in case a paper gets jammed |
| PF2309K106NI |
Input tray assembly - Plastic tray that holds paper before it is scan - Located on the automatic document feeder (ADF) assembly |
| PF2309K107NI |
Front cover assembly - Plastic cover that protects the front part of the automatic document feeder (ADF) assembly |
| PF2309K108NI |
Screw (SCR04T100PLA) |
| PF2309K110NI |
ADF interface cable guide |
| PF2309K111NI |
Automatic document feeder (ADF) interface cable toroid guide |
| PF2309K112NI |
Automatic document feeder (ADF) interface cable toroid guide |
| PF2309K113NI |
Screw (SCR-5-4-DAN) |
| PF2309K114NI |
Rear cover - For the automatic document feeder (ADF) |
| PF2309K115NI |
Screw (SCR03T100PLA) |
| PF2309K116NI |
Output tray extension - For the automatic document feeder (ADF) |
| PF2309K117NI |
White background guard assembly - White sheet located on the automatic document feeder (ADF) assembly |
