Part |
Picture |
Description |
C6615DN |
No. 15 Black ink print cartridge - 25 ml ink (USA) |
C6615DL |
HP 15 Black InkJet Cartridge LAR |
C6615DE |
HP 15 Black InkJet Cartridge EUR |
C6615DC |
HP 15 Black InkJet Cartridge Can |
C6615DA |
No. 15 Black ink print cartridge - 25 ml ink (Asia Pacific) |
C6613AN |
Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
C6612AN |
Black print cartridge (high capacity) - (two-pack of 51629A) each prints approximately 650 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
C6611AN |
Black print cartridges (high capacity) - (two-pack of 51626A) each prints approximately 800 pages based on 5% density on an 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
C6587AN |
Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art |
C6578DN |
HP 78 Tri-color InkJet Print Cartridge - 19ml - Prints approximately 450 color graphic pages (North America) |
C6578DL |
InkJet Cartridge 78 Color LAR |
C6578DE |
Tri-color ink economy print cartridge - Prints approximately 450 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Europe) |
C6578DC |
InkJet Cartridge 78 Color Can |
C6578DA |
InkJet Cartridge 78 Color AP |
C6578AN |
HP 78XL Tri-color InkJet Print Cartridge - Prints approximately 1200 color graphic pages (North America) |
C6578AL |
InkJet Cartridge 78 Large Color LAR |
C6578AE |
InkJet Cartridge 78 Large Color EUR |
C6578AC |
InkJet Cartridge 78 Large Color Can |
C6578AA |
InkJet Cartridge 78 Large Color AP |
C6520A |
Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 3.0m (9.8ft) long |
C6518A |
Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
C6502A |
HP IEEE 1284 parallel printer port module HP JetDirect OfficeJet 200n 1284 LIO Parallel IEEE Printer Server |
C6490-80022 |
Service station absorber (sponge) - Soaks up used ink during cartridge cleaning |
C6490-60044 |
Service station assembly - For conditioning the printheads when the carriage is in its home position |
C6487-80019 |
Trailing cable (rear) |
C6487-80018 |
Trailing cable (front) |
C6487-80011 |
Encoder strip (clear strip with position marks) - Used by the sensor in the carriage assembly to determine position |
C6487-80005 |
Sponge - Absorbs excess ink left over from cleaning print cartridges |
C6487-60065 |
Service station assembly - For conditioning the ink cartridges when the carriage is in its home position |
C6487-60054 |
Paper pusher rail |
C6487-60050 |
Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing. |
C6487-60047 |
Paper pickup motor - Provides power for paper pickup drive assembly |
C6487-60031 |
Right wingframe assembly |
C6487-60030 |
Left wingframe assembly |
C6487-60020 |
Service station motor - Drives the service station assembly |
C6487-60003 |
Carriage PC board - Contains the print cartridge control circuitry |
C6487-20001 |
Carriage rod - Slider/guide rod for the pen carriage assembly |
C6463A |
Duplexer Module - REPLACEMENT DUPLEXER MODULE ASSEMBLY - INSTALLS IN REAR OF PRINTER (IN PLACE OF THE REAR CLEAN OUT DOOR ASSEMBLY) |
C6455-60057 |
Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly |
C6455-60056 |
Pivot and feed roller assembly - Includes pivot and shaft with 4 rollers, gears, encoder disk, bearings - Feeds the media under the carriage assembly and print cartridges |
C6455-40050 |
Belt attachment base - Mounts on rear of carriage assembly - Covers carriage PC board and holds belt attachment tower |
C6455-40026 |
Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis |
C6455-00006 |
Backbone - Large metal item attached to the front of the printer base |
C6437A |
Duplexer Assembly - Automatic two sided printing accessory |
C6436-80070 |
Absorber- base svc |
C6436-80010 |
Encoder strip (Clear strip with position marks) - Used by the sensor in the carriage assembly to determine position C8154 80028. |
C6436-67029 |
Pickup Roller Assembly - Shaft with large rollers and one gear |
C6436-67027 |
Assy wingframe, rt svc |
C6436-67026 |
Assy wingframe, lt svc |
C6436-67011 |
Assy - manifold svc |
C6436-67010 |
Assy - carriage svc |
C6436-67009 |
Absorber - base svc |
C6436-67008 |
Assy- service station svc |
C6436-67006 |
Duplexer Module - For two-sided printing |
C6436-67004 |
HP IEEE 1284 parallel printer port module HP JetDirect OfficeJet 200n 1284 LIO Parallel IEEE Printer Server |
C6436-60109 |
Assy- manifold for HP DeskJet 6620 Series |
C6436-60097 |
Assy, j mech w/pkg |
C6436-60095 |
Assy wingframe,lt svc |
C6436-60094 |
Svc-assy, wingframe, right |
C6436-60078 |
Carriage assembly - Holds and positions print cartridges |
C6436-60050 |
Service station assembly - For conditioning the ink cartridges when the carriage is in its home position |
C6436-60044 |
Rear door assembly - Removed when duplexer is present, this door allows for access and removal of paper jams |
C6436-60040 |
Input paper tray |
C6436-40133 |
Bumper foot - replacement rubber foot for the bottom of the printer (four used) |
C6436-40100 |
LIO cover - Covers opening for unused LIO slot |
C6431-60139 |
Top cover (Bonnet) |
C6429-80084 |
Carriage assembly flex cable - Has 24-pin (M) edge connectors - 38.6cm (15.2in) long |
C6429-69319 |
Carriage PC board - Contains the print cartridge control circuitry - For Japan only |
C6429-60319 |
Carriage PC board - Contains the print cartridge control circuitry - For Japan only |
C6429-60162 |
Carriage assembly - Includes carriage, felt, felt retainers, ink cartridge latches - Does not include trailing cable, PC board, belt attachment hardware, or slider |
C6429-60159 |
Width adjust - Holds media against right wall of input tray |
C6429-60158 |
Media input length adjuster assembly - Includes both coarse and fine length adjusters |
C6429-60157 |
Fine paper length adjuster - Holds paper firmly against the back of the paper input tray |
C6429-60156 |
Paper input business tray/drawer assembly - Includes tray base, pressure plate, width adjust, length adjust, and paper tray handles |
C6429-60144 |
Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Feeds paper from the paper input tray into the print mechanism |
C6429-60141 |
Inner paper guide (Includes antistatic brush) - Guides the paper through the print mech and over the upper paper guide |
C6429-60025 |
Kicker bar cam link (spring loaded) |
C6429-60016 |
Shift Plate Assembly - Five Plastic Gears Held in a Two |
C6429-60007 |
Left wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly |
C6429-60006 |
Right wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly |
C6429-60004 |
Paper drive motor assembly - Includes pulley |
C6429-40063 |
Tray cover extension - Pulls out of the paper output tray/cover to hold longer media |
C6429-40062 |
Paper output business tray cover - Seperates the output media from the input media |
C6429-40031 |
Paper pusher bar (Bar with three levers) - Pushes the printed paper from the pivot and feed roller assembly on to the output paper tray |
C6429-40008 |
Roller bearing for HP DeskJet 6940 Series |
C6429-40005 |
Cluster gear for HP OfficeJet K60 |
C6429-40001 |
Paper drive belt |
C6429-00014 |
Paper drive assembly bracket - Paper drive motor, cluster gear and the encoder PC board all mount to this item |
C6429-00010 |
Brush, antistatic |
C6428-40002 |
Lower paper guide (Curved plastic paper guide) - The six guide rollers mount on this piece |
C6428-40001 |
Latch knob - Mounts on the rear paper cleanout door assembly |
C6426-80019 |
Sponge - Absorbs excess ink and debris from cleaning print cartridges |
C6426-60064 |
Paper tray frame assembly - Includes paper tray frame, paper tray cover, paper tray side covers, springs, and cam |
C6426-60059 |
Cable assembly - Has 4-pin (F) connectors - 4.9cm (1.9in) long |
C6426-60058 |
Interconnect PC board - Small square PC board with 4 contact pads for the duplexer module |
C6426-60054 |
Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts |
C6426-60049 |
Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings |
C6426-60038 |
Rear cleanout door assembly - Paper jam cleanout door |
C6426-60033 |
Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a) |
C6426-60023 |
Paper tray width/length adjuster - Holds media against right wall of input tray or against the rollers |
C6426-60020 |
Pressure plate - Mounts in the rear of the paper input tray - Used to push the paper stack into the feed roller |
C6426-60013 |
Spot sensor assembly |
C6426-40123 |
Paper input tray base |
C6426-40118 |
Kicker bar - Restacks paper in paper input tray stack after the top sheet is picked |
C6426-40115 |
Carriage belt - Moves the carriage assembly across the carriage rod |
C6426-40103 |
Kicker bar cam gear - Gear with cam lobe and offset pin |
C6426-40102 |
Separator Peg - Pushes up the separator pad during the paper pick operation |
C6426-40100 |
Separator peg lifter - Used to lift and retain the separator peg under spring tension - Caution: if this part is installed incorrectly, printer will NOT function |
C6426-40099 |
Kicker Bar - Restacks Paper in Paper Input Tray Stack After |
C6426-40098 |
Lower paper guide housing (Does NOT include any attaching parts) |