| Part |
Picture |
Description |
| C6426-40089 |
DOOPS flag - Lifts the out of paper sensor (OOPS) flag out of the way when media is moving back towards the duplexer module - Mounts on the upper paper guide behind OOPS flag |
| C6426-40086 |
Cover - For rear paper cleanout door assembly |
| C6426-40085 |
Spittoon base - The bottom and main housing of the service station assembly - Holds any residual ink from the print cartridge cleaning process |
| C6426-40070 |
Width adjuster assembly - Used to set the paper input tray to the width of the paper being used |
| C6426-40068 |
Paper input tray right handle |
| C6426-40067 |
Paper input tray left handle |
| C6426-40064 |
Drawer cam - Short, spring loaded lever attached to the paper tray frame - Used to draw input tray into position |
| C6426-40052 |
OOPS flag - (out of paper) media sensor lever flag - Mounts on the top right edge of the upper paper guide |
| C6426-40026 |
Paper pusher rail |
| C6426-40021 |
Upper paper guide (Does NOT include any attaching parts) - Spring loaded flat plate that presses the media against the top of the feed roller assembly - Caution: this part can easily be broken |
| C6426-40018 |
Belt attachment beam (I-shaped) - Used to secure the belt attachment tower to the carriage assembly |
| C6426-40017 |
Belt attachment tower - Used to attach the carriage belt to the carriage assembly |
| C6426-40014 |
Top Cover (Bonnet) - Mounts on Top of the Spittoon in the |
| C6426-40001 |
Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis |
| C6426-20012 |
Tray spring - Installed near front of paper tray frame - Used in conjunction with the drawer cam to hold the paper input tray assembly in position |
| C6426-20011 |
Rod spring - Installed on right side of backbone |
| C6426-20008 |
Envelope spring assembly - Aligns envelopes when inserted into the envelope feed slot |
| C6426-20005 |
Spring for rear rollers |
| C6426-00018 |
Capture clip for HP DeskJet 952C |
| C6426-00017 |
Lifter spring - Provides upper tension on the kicker bar (cam follower) lift plate |
| C6426-00015 |
Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker |
| C6426-00006 |
Felt retainer - Holds the carriage lubrication felt on both sides of the pen carriage assembly |
| C6426-00005 |
Ferrite clip - Used to hold trailing cable ferrite in place |
| C6426-00004 |
Upper paper guide support - Support bracket which attaches to the print mech frame for mounting the upper paper guide |
| C6426-00001 |
Upper rail for HP DeskJet 952C |
| C6419-60058 |
Carriage motor - Provides power for carriage belt |
| C6411-60004 |
Paper tray left side assembly (Left cheek assembly) - Includes left cheek, banner PCA and cable assembly, banner switch lever |
| C6411-40006 |
Banner lever - Used to choose either single sheet paper or continuous feed (Banner) paper |
| C6410-60037 |
Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray |
| C6410-60006 |
Width adjust assembly (Purple) - Holds media against right wall of input tray - Includes left wall pusher, both springs, width adjust, and width adjust channel |
| C6410-60005 |
Paper input tray assembly (complete) - Entire assembly - Purple |
| C6410-40006 |
Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray |
| C6410-40005 |
Width adjust (Purple) - Holds media against right wall of input tray |
| C6409-80003 |
Lubricating felt pad (C-shaped) - Lubricates the carriage assembly as it moves across the carriage rod |
| C6409-60237 |
Ink cartridge carriage PC board |
| C6409-60200 |
Paper encoder PCA - Controls operation of paper motor |
| C6409-60037 |
Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel |
| C6409-60004 |
Paper advance motor |
| C6409-60003 |
Ink cartridge carriage assembly - This item should be replaced only by trained, experienced service personnel |
| C6409-40040 |
Pick cam - Controls pressure plate and lever |
| C6409-40034 |
Left wall pusher - Pushes against left side of media to maintain correct edge alignment |
| C6409-40031 |
Ink cartridge carriage |
| C6409-40030 |
Spring guide for HP DeskJet 880C Series |
| C6409-40028 |
Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt |
| C6409-40022 |
Upper paper guide - Guides media through paper path |
| C6409-40021 |
Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel |
| C6409-20004 |
Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel |
| C6409-20003 |
Carriage rod - Slider/guide rod for the pen carriage assembly |
| C6409-20002 |
Rod mounting clip |
| C6409-00017 |
Wing torsion spring - Provides pressure on the wing during paper output |
| C6409-00013 |
BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel |
| C6409-00011 |
Encoder spring - Provides tension for encoder strip |
| C6409-00009 |
Backbone - Large metal item attached to the front of the printer base |
| C6409-00008 |
Upper paper guide support - Base for upper paper guide |
| C6044A |
HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes |
| C6039A |
HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C6039-60010 |
C6039-60010 |
| C5977B |
Media for HP C6465A |
| C5977A |
Media for HP C6429C |
| C5976B |
Media for HP C8244A |
| C5976A |
Media for HP C6429C |
| C5973A |
Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package |
| C5876-80002 |
Antistatic brush |
| C5876-60066 |
Service station motor - Drives the service station assembly |
| C5876-60014 |
Carriage assembly - Holds two print cartridges - Should be replaced only by trained experienced service personnel - Requires alignment after replacement |
| C5870-80007 |
Spittoon sponge - Absorbs excess ink from cartridges |
| C5870-60140 |
Cable assembly - 12-pin (F) connector, 5-pin (F) connector, and 7-pin (F) connector - 43.9cm (17.3in) long |
| C5870-60092 |
Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA |
| C5870-60081 |
Paper input tray assembly (partial) - Includes only base of tray and pressure plate assembly |
| C5870-60004 |
Service station motor assembly - Includes PC board and gear |
| C5870-40039 |
Wing frame - Chassis for in/out tray components |
| C5870-40037 |
Length adjuster - Media input length adjuster |
| C5870-40036 |
Integrated slider for carriage assembly |
| C5870-40030 |
Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel |
| C5870-40029 |
Separator peg for HP DeskJet 895C |
| C5870-40028 |
Paper input tray base - Does not include the pressure plate assembly |
| C5870-40024 |
OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide |
| C5870-40022 |
Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment |
| C5870-40020 |
Right backbone brace - Installed on right side of printer base to provide support for backbone |
| C5870-40019 |
Paper tray panel (right cheek) - Attaches to the right edge of the wing frame |
| C5870-40017 |
Cluster gear (large gear) |
| C5870-40016 |
Service station bonnet - Top cover of the spittoon - Has cutout for pallet/link assembly |
| C5870-40014 |
Spittoon base - The bottom of the service station assembly |
| C5870-20002 |
Paper stacker (kicker) spring |
| C5870-00010 |
Paper motor mounting bracket |
| C5870-00006 |
Width adjust channel |
| C5870-00004 |
Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion |
| C5870-00002 |
Service station ESD grounding clip |
| C5374-80035 |
Telephone cable (Turkey) |
| C5374-80034 |
LIU to wall socket cable (Switzerland, Italian, and French) |
| C5374-80033 |
White reference spring - Applies pressure against the white reference |
| C5374-80031 |
Document carrier sleeve - Full size, sealed on one side |
| C5374-80030 |
Cable assembly - 16-pin (F) connector to 23.5cm (9.3in) cable with 3-pin (F) connector, 34.3cm (13.5in) cable with 3-pin (F) connector, 36.2cm (14.3in) cable with 7-pin (F) connector, and 78.4cm (30.9in) cable with 5-pin (F) connector |
| C5374-80025 |
Paper guide for HP OfficeJet K80 Series |
| C5374-80023 |
Feed roller spring - Installed on lower ADF feed roller |
| C5374-80021 |
Ribbon cable - Has 22-pin (M) edge connector - 46.0cm (18.1in) long |
| C5374-80014 |
Ribbon cable - Has 26-pin (M) edge connectors - 33.7cm (13.3in) long |
| C5374-80013 |
Telephone cable to wall socket (Czech Republic, Slovak and Hungary) |
| C5374-80005 |
Ribbon cable - Has 15-pin (M) edge connectors - 41.3cm (16.3in) long |
| C5374-80004 |
Cable assembly - Has 15-pin (F) connectors - 75.7cm (29.8in) long |
| C5374-80001 |
Cable assembly - Has a 7-pin (F) connector, a 5-pin (F) connector, and a 3-pin (F) connector - Overall length is 48.3cm (19in) |
| C5374-69002 |
Main logic PC board |
| C5374-69001 |
White reference - White plastic item used to calibrate the scanner assembly and applies pressure to the top of the document as it moves across the scanner glass |
| C5374-60157 |
LIU interconnect PC board |
| C5374-60155 |
Scanner lamp PC board - Drives scanner lamp |
| C5374-60151 |
Sensor PC board - Includes cover open sensor, paper width sensor, and paper edge sensor |
| C5374-60072 |
White reference - White plastic item used to calibrate the scanner assembly and applies pressure to the top of the document as it moves across the scanner glass |
| C5374-60065 |
OfficeJet T Series Service Manual on a CD-ROM |
| C5374-60035 |
Line interface unit (LIU) module (Singapore, Hong Kong, Turkey, Poland, and South Africa) |
| C5374-60034 |
Line interface unit (LIU) module (Australia and New Zealand) |
