Part |
Picture |
Description |
C4836AA |
No. 11 standard capacity cyan ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
C4836A |
HP 11 Cyan Ink Cartridge - Prints approximately 1750 color graphics pages |
C4817AE |
No. 13 standard capacity yellow ink cartridge (holds 28ccs of ink)(Europe) |
C4817A |
HP 13 Standard Capacity Yellow Ink Cartridge - 28cc (US) |
C4816AE |
No. 13 standard capacity magenta ink cartridge (holds 28ccs of ink)(Europe) |
C4816A |
HP 13 Standard Capacity Magenta Ink Cartridge - 28cc (US) |
C4815AE |
No. 13 standard capacity cyan ink cartridge (holds 28ccs of ink)(Europe) |
C4815A |
HP 13 Standard Capacity Cyan Ink Cartridge - 28cc (USA) |
C4814AE |
No. 13 standard capacity black ink cartridge (holds 28ccs of ink)(Europe) |
C4814A |
HP 13 Standard Capacity Black Ink Cartridge - 28cc (USA) |
C4813A |
No. 11 yellow ink printhead |
C4812A |
No. 11 magenta ink printhead |
C4811A |
No. 11 cyan ink printhead |
C4810A |
No. 11 black ink printhead |
C4663-69001 |
Replacement OfficeJet (Option ABA: US - English) - For HP repair use ONLY |
C4663-60124 |
Overlay - For front panel function keys - Model 350 (Dutch) |
C4663-60118 |
Overlay - For front panel function keys - Model 350 (French) |
C4663-60115 |
Overlay - For front panel function keys - Model 350 (German) |
C4663-60112 |
Overlay - For front panel function keys - Model 350 (English) |
C4662-90031 |
OfficeJet 300 Installation Guide |
C4662-90001 |
OfficeJet 300 Users Manual (English) |
C4662-69007 |
Replacement OfficeJet (Option ABF Canada/English) - For HP authorized service only |
C4662-69002 |
Replacement OfficeJet (Option ABF Canada/France) - For HP authorized service only |
C4662-69001 |
Replacement OfficeJet (Option ABA: US - English) - For HP HP repair use ONLY |
C4662-60118 |
Overlay - For front panel function keys - Model 300 (French) |
C4662-60112 |
Overlay - For front panel function keys - Model 300 |
C4661-90031 |
OfficeJet 330 and 350 Installation Guide |
C4661-90020 |
OfficeJet 300/330/350 Service Manual |
C4661-90001 |
OfficeJet 330 and 350 Users Guide (English) |
C4661-80001 |
Wire catch tray - Attaches to paper output tray |
C4661-69001 |
Replacement OfficeJet (Option ABA: US - English) - For HP HP repair use ONLY |
C4661-60297 |
Sled assembly replacement kit - Includes the sled assembly, PVC gloves, and replacement instructions (English) |
C4661-60144 |
LIU (Line interface unit) module replacement kit - Includes module, label, instructions and removal tool (USA) |
C4661-60143 |
Overlay - For front panel function keys - Model 330 (Spanish) |
C4661-60130 |
Overlay - For front panel function keys - Model 330 (Korea) |
C4661-60112 |
Overlay - For front panel function keys - Model 330 |
C4661-60008 |
Scanner module assembly - Includes lens cover, scanner LED array, LED window, and scanner module assembly base |
C4661-60006 |
LIU (Line interface unit) module (Korea) |
C4661-60004 |
Paper output tray |
C4661-60003 |
Paper input tray |
C4661-60002 |
Scanner LED array PC board |
C4661-40006 |
Bridge - Provides separation between paper in output tray and input tray |
C4661-00001 |
Serial Number Label - Attached to Rear of Main Cover |
C4647-60003 |
Ribbon cable assembly - Two ribbon cables bundled together - Has 14-pin (M) edge connectors - 34.3cm (13.5in) long |
C4602-80004 |
Head drive flex cable - 43.2cm (17in) long |
C4602-60022 |
Carriage motor - Provides power for carriage belt |
C4602-60004 |
Paper motor - Drives paper through printer |
C4602-40039 |
Clutch actuator arm - Used to engage the pivot gears |
C4602-40027 |
Flex cable bracket / housing |
C4602-40013 |
PPR cluster gear |
C4602-00012 |
Bias spring - Provides down pressure on the clutch actuator arm |
C4562-60018 |
Garage assembly - Holds print cartridge when not in use - Also referred to as a cartridge humidor |
C4557-80075 |
Carriage assembly flex cable - 40.3cm (15.9in) long |
C4557-80027 |
Length adjust pad (Poron) - Mounted under the fine length adjuster |
C4557-80019 |
Paper motor encoder disk |
C4557-80002 |
Felt washer - Used to lubricate the carriage rod |
C4557-80001 |
Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position |
C4557-60109 |
Turnaround assembly - Provides carriage belt tension - Does not include spring |
C4557-60062 |
Banner PCA and cable assembly |
C4557-60049 |
Paper input tray pressure plate |
C4557-60046 |
Cartridge latch (Color) - Holds color ink cartridge in place |
C4557-60045 |
Cartridge latch (Black) - Holds black ink cartridge in place |
C4557-60025 |
Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder |
C4557-60022 |
Cable assembly - An 11-pin (F) connector to two 3-pin (F) connectors and a 7-pin (F) connector - 36.8cm (14.5in) long |
C4557-60014 |
Wiper assembly - Metal base with plastic wipers |
C4557-60013 |
Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing) |
C4557-60011 |
Separator pad for HP DeskJet 700 Series |
C4557-60003 |
Carriage motor assembly (Includes pulley) |
C4557-40150 |
Pivot snap - Used to hold pivot to pick feed roller shaft |
C4557-40130 |
Left wall brace - Provides support for left wall |
C4557-40128 |
Left backbone brace - Provides support for backbone |
C4557-40121 |
Encoder disk guide |
C4557-40118 |
Rubber foot - Replacement rubber foot for the bottom of the printer (four used) |
C4557-40116 |
Paper tray left outer panel (left cheek) - Attaches to left edge of wing frame |
C4557-40102 |
Feed roller cluster gear |
C4557-40099 |
Paper tray right inner panel (right cheek cap) - Mounts between right wing and right outer panel |
C4557-40098 |
Paper tray left inner panel (left cheek cap) - Mounts between left wing and left outer panel |
C4557-40095 |
Encoder gear for HP Color Copier 260 |
C4557-40085 |
Link pin for HP Color Copier 160 |
C4557-40084 |
Pivot link for HP Color Copier 270 |
C4557-40079 |
Transfer gear (double gear) |
C4557-40069 |
Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring |
C4557-40068 |
Cap vent - For equalizing the print cartridge capping pressure |
C4557-40066 |
Drive shaft with molded gears on each end |
C4557-40063 |
Separator lifter - Used to lift the separator peg |
C4557-40049 |
Carriage drive belt - Moves printhead side to side |
C4557-40042 |
Plastic latch (Y-shaped) |
C4557-40034 |
Drawer cam - Short, spring loaded lever attached to the base of the wing frame - Used to draw input tray into position |
C4557-40026 |
Output door - Separates output media from input media |
C4557-40025 |
Right wing - Holds printed paper after being ejected |
C4557-40024 |
Left wing - Holds printed paper after being ejected |
C4557-40021 |
Feed roller idler gear |
C4557-40020 |
Lower guide - Platform for seperator peg, spring and pad |
C4557-40016 |
Kicker - Restacks paper in stack after top sheet is picked |
C4557-40015 |
Rear roller (Black) - Between paper and rear paper guide |
C4557-40013 |
Rear paper guide - Guides media through rear of printer |
C4557-40007 |
Pick gear for HP Color Copier 170 |
C4557-20028 |
EOR tension spring - Maintains tension on wear strip |
C4557-20027 |
Cartridge latch shaft near top of carriage |
C4557-20026 |
Felt retainer - Holds the lubricating felt to the side of the carriage |
C4557-20024 |
Shifter spring - Provides tension on the pivot |
C4557-20020 |
Envelope spring - Holds envelopes in position for picking |
C4557-20009 |
Latch spring - Provides friction for the knob on the rear cleanout door assembly |
C4557-20007 |
Pinch spring - Provides tension on upper paper guide |
C4557-20003 |
Rear roller spring - Flexible axle for rear roller |
C4557-20002 |
Pinch roller - Provides downward pressure on media as it passes by upper paper guide |
C4557-00043 |
Paperclip - Holds upper paper guide pinch rollers in place |
C4557-00038 |
Paper motor ESD shield |
C4557-00037 |
Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker |
C4557-00035 |
Paper pusher spring - Maintains alignment in paper tray |