| Part |
Picture |
Description |
| C4557-00033 |
Link spring - Provides tension to shaft of pick cam gear |
| C4557-00031 |
Paper length adjuster spring - Provides tension for paper input length adjuster |
| C4557-00030 |
Left wall spring (rear) - Provides pressure against media |
| C4557-00029 |
Left wall spring (front) - Holds left wall assembly in position |
| C4557-00026 |
Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges |
| C4557-00024 |
Ferrite retainer - Holds head drive flex cable ferrite |
| C4557-00018 |
Encoder spring - Provides tension for encoder strip |
| C4557-00017 |
Belt tension spring - Provides tension for carriage belt |
| C4557-00012 |
Right wing spring - Applies pressure to right wing during paper output |
| C4557-00011 |
Drawer spring - Holds input drawer in place |
| C4557-00009 |
Separator spring - Provides pressure between separator assembly and the center drive roller |
| C4555-60068 |
Turnaround assembly - Holds belt tension components in place |
| C4555-60067 |
Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle |
| C4555-60028 |
Pivot and feed roller assembly - Includes pivot and shaft - Feeds the media under the carriage assembly and print cartridges |
| C4555-60005 |
Paper drive motor - Drives media through printer |
| C4555-40066 |
Clutch actuator arm - Used to engage the pivot gears |
| C4555-40002 |
Gear cluster (Dual gear) |
| C4549-00002 |
Paper guide - Holds the upper pinch rollers and springs |
| C4531-40017 |
Right wing - Holds printed document after being ejected - Part of the input/output paper tray assembly |
| C4531-40016 |
Left wing - Holds printed document after being ejected - Part of the input/output paper tray assembly |
| C3836A |
Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets |
| C3833A |
Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets |
| C3832A |
Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package |
| C3803-80001 |
Telephone cable (four conductor) - RJ-11 (M) to TAE-N (M) - 3m (9.8ft) long (Germany) |
| C3803-69007 |
Replacement OfficeJet 590 (Option ABH: dutch version) - For sale in Europe ONLY |
| C3803-69006 |
Replacement OfficeJet 590 (Option ABF: French version) - For sale in Europe ONLY |
| C3803-69005 |
Replacement OfficeJet 590 (Option ABU: U.K. english version) - For sale in Europe ONLY |
| C3803-69004 |
Replacement OfficeJet 500 (Option ABD: German version) - For sale in Europe ONLY |
| C3803-69003 |
Replacement OfficeJet 590 (Option ABD: German version) - For sale in Europe ONLY |
| C3803-60135 |
Line interface unit (LIU) replacement kit - Includes plug-in fax/phone line module and replacement instructions - Does NOT come with LIU to wall socket cable (for the Netherlands) |
| C3803-60134 |
Line interface unit (LIU) replacement kit - Includes plug-in fax/phone line module and replacement instructions - Does NOT come with LIU to wall socket cable (for France) |
| C3803-60133 |
Line interface unit (LIU) replacement kit - Includes plug-in fax/phone line module and replacement instructions - Does NOT come with LIU to wall socket cable (for Germany) |
| C3803-60132 |
Line interface unit (LIU) replacement kit - Includes plug-in fax/phone line module and replacement instructions - Does NOT come with LIU to wall socket cable (for the U. K. ) |
| C3803-60116 |
Line interface unit (LIU) - Plug-in fax/phone line module - Includes LIU to wall socket cable (for Latin America) |
| C3803-60099 |
Control panel replacement kit - Includes the control panel assembly (International version) , multi-lingual instructions, and panel removal tool |
| C3803-60020 |
Control panel overlay - For the OfficeJet 590 - Snaps on top of the control panel assembly (UK) |
| C3803-60019 |
Control panel overlay - For the OfficeJet 590 - Snaps on top of the control panel assembly (Germany) |
| C3803-60018 |
Control panel overlay - For the OfficeJet 500 - Snaps on top of the control panel assembly (Germany) |
| C3803-60017 |
Control panel overlay - For the OfficeJet 500 - Snaps on top of the control panel assembly (Mexico) |
| C3803-60016 |
Control panel overlay - For the OfficeJet 590 - Snaps on top of the control panel assembly (Netherlands) |
| C3803-60015 |
Control panel overlay - For the OfficeJet 590 - Snaps on top of the control panel assembly (France) |
| C3803-60013 |
Rear panel power socket/power cable assembly - C14 (M) power socket to an 18cm (7.1in) cable with a 3-pin (F) connector and a 22.3cm (8.8in) ground wire with a ring terminal |
| C3801-90091 |
Control panel removal and replacement instruction guide (English) |
| C3801-90001 |
C4641A/C4642A/C4643A/C4644A/C4645A HP OfficeJet Series 500 |
| C3801-80073 |
Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long |
| C3801-80072 |
Cable assembly - Has 5-pin (F) connectors - 11.8cm (4.6in) long |
| C3801-80071 |
Torsion spring - For paper detect flag |
| C3801-80069 |
Cable assembly - Has 14-pin (F) connectors - 40.6cm (16in) long |
| C3801-80067 |
Spring - Located on right side of starwheel assembly |
| C3801-80061 |
Spittoon sponge - Located in bottom of spittoon |
| C3801-80060 |
Spittoon sponge - Absorbs excess ink from color cartridges |
| C3801-80059 |
Spittoon sponge - Absorbs excess ink from black cartridges |
| C3801-80051 |
Separator pad - Mounts on the media chassis assembly |
| C3801-80046 |
Mylar pad - Installed in the scanner cover assembly under the friction pad |
| C3801-80036 |
Carriage drive belt - Black with small teeth |
| C3801-80031 |
ASF plunger spring under the ADF separator |
| C3801-80029 |
Cable assembly - Has 3-pin (F) connectors - 18.1cm (7.1in) long |
| C3801-80024 |
Gimbal spring - Coil spring installed in the scanner cover assembly located under the gimbal |
| C3801-80020 |
Cable assembly - Has 3-pin (F) connectors - 25.0cm (9.8in) long |
| C3801-80007 |
Ribbon cable - Has 30-pin (M) connectors - 13.3cm (5.2in) long |
| C3801-80006 |
Cable assembly - Has 11-pin (F) connectors - 20.3cm (8.0in) long |
| C3801-80004 |
Encoder strip - Used to determine carriage position |
| C3801-69105 |
Main logic PC board |
| C3801-69038 |
Print mechanism assembly - Includes motors, carriage drive belt, carriage assembly, service station, sled, starwheel assembly, and pen driver PC board |
| C3801-69001 |
Replacement OfficeJet 5xx series (Option ABA: US - English) - For HP repair use ONLY |
| C3801-60167 |
Plunger assembly |
| C3801-60157 |
Print cartridge access door (Quartz Gray) - Large lift-up door on top of the OfficeJet |
| C3801-60156 |
Starwheel assembly - Includes starwheel chassis assembly and starwheels |
| C3801-60145 |
Left side case (Quartz Gray) - (USA) |
| C3801-60135 |
Control panel overlay - For the OfficeJet 590 - Snaps on top of the control panel assembly (USA and Australia) |
| C3801-60127 |
Control panel replacement kit - Includes the control panel assembly (U. S. version) , instruction sheet, and panel removal tool |
| C3801-60126 |
Clutch assembly - Used to prevent reversal of the starwheel shaft and output roller - Located on left end of starwheel assembly |
| C3801-60094 |
Automatic document feeder (ADF) tray - Quartz Gray |
| C3801-60092 |
Paper advancement motor assembly (includes gear) |
| C3801-60091 |
Control panel overlay - For the OfficeJet 580 - Snaps on top of the control panel assembly |
| C3801-60090 |
Control panel overlay - For the OfficeJet 570 - Snaps on top of the control panel assembly |
| C3801-60089 |
Control panel overlay - For the OfficeJet 520 - Snaps on top of the control panel assembly |
| C3801-60088 |
Control panel overlay - For the OfficeJet 500 - Snaps on top of the control panel assembly (USA) |
| C3801-60085 |
Right side case (Quartz Gray) |
| C3801-60083 |
Power cord assembly - For OfficeJets designed with a nondetachable type power cord (For 120V in the USA and Canada) |
| C3801-60052 |
Paper deflector - Directs paper from the media chassis to the print section of the printer chassis assembly |
| C3801-60051 |
Pick roller assembly - Long shaft with multiple rollers - Used in automatic sheet feeder |
| C3801-60048 |
Scanner assembly |
| C3801-60044 |
Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges |
| C3801-60043 |
Spittoon assembly - Holds excess ink from cartridges |
| C3801-60040 |
Tension arm - Maintains tension on carriage belt |
| C3801-60021 |
Speaker assembly |
| C3801-60015 |
Pick roller assembly - Short wide roller |
| C3801-60005 |
Carriage drive motor assembly (includes gear only for black carriage drive belt with small teeth) |
| C3801-60002 |
Print cartridge service station assembly |
| C3801-40189 |
Lower back case (Quartz Gray) - Rear panel (with LIU module slot) |
| C3801-40159 |
Cap - Holds right end of carriage rod in print mechanism |
| C3801-40158 |
Cap - Holds left end of carriage rod in print mechanism |
| C3801-40152 |
Drive gear cluster (Dual gear) |
| C3801-40147 |
Lever - Used to manually release the pinch roller pressure on the main drive rollers to allow paper removal |
| C3801-40128 |
Pad installed in the scanner cover assembly - Used along with pad spring to maintain pressure against friction pad |
| C3801-40126 |
Kick gear cluster (Dual gear) |
| C3801-40119 |
Paper detect flag - Located on the back, left, rear of the print mechanism - Used to detect edge of paper |
| C3801-40100 |
Paper detect flag - Mounts on bottom of media chassis - Used to detect edge of paper |
| C3801-40058 |
Left side case (Quartz Gray) - (Not for USA) |
| C3801-40057 |
Lower front case (Quartz Gray, U-shaped) - Supports the media output tray |
| C3801-40055 |
Paper output tray - Quartz Gray |
| C3801-40020 |
Clamp - Holds carriage trailing cable in place |
| C3801-40019 |
Carriage belt clip - Only for black carriage drive belt with small teeth |
| C3801-20002 |
Carriage rod - Shaft that the carriage assembly rides on |
| C3801-00096 |
Hook tool - Special tool required to release the back edge locking tab on the control panel |
| C3801-00062 |
Brace for HP OfficeJet 700 Series |
| C3801-00052 |
Door latch - Metal spring clip on the bottom of the print cartridge access door |
| C3801-00029 |
Plate/bracket - Installed in the scanner cover assembly over the pre-feed spring |
| C3801-00025 |
Pre-feed spring (rectangular) |
