| Part |
Picture |
Description |
| C5374-60033 |
Line interface unit (LIU) module (Germany, UK, Netherlands, France, Spain, Italy, Switzerland, Sweden, Greece, Denmark, Austria, Finland, Norway, Portugal, Belgium, and Ireland) |
| C5374-60032 |
Line interface unit (LIU) module (Korea, Taiwan, and Israel) |
| C5374-60028 |
Top case - Encloses print mechanism, ADF mechanisms, and scanner assembly |
| C5374-60027 |
Scanner assembly ground cable |
| C5374-60025 |
Rear case assembly - Includes rear case, LIU interconnect PC board, LIU cable, LIU clip |
| C5374-60024 |
Base assembly - Includes rubber feet |
| C5374-60022 |
Latch - Holds lower ADF assembly in place - Two used |
| C5374-60021 |
Postscan roller - Shaft with 2 rollers - Mounts on underside of the lower ADF chassis |
| C5374-60020 |
Prescan roller - Shaft with 3 rollers - Mounts on underside of the lower ADF chassis |
| C5374-60019 |
ADF separator assembly |
| C5374-60016 |
Motor Plate - Holds ADF Stepper Motor and several gears |
| C5374-60015 |
ADF feed roller (Short wide roller) mounts in center of the lower ADF chassis assembly |
| C5374-60014 |
Speaker assembly - Includes speaker cable |
| C5374-60010 |
Scanner assembly - Includes light, mirrors, scanner CCD array, scanner PC board - No lower lever parts available |
| C5374-60008 |
Cartridge access door - Includes ADF input document guides |
| C5374-60006 |
Front panel assembly - Includes front panel PC board, bezel, and cable |
| C5374-60004 |
Upper ADF assembly - Includes document sensor flag, edge sensor flag, antistatic brush, and pinch rollers |
| C5374-60002 |
Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station operations |
| C5374-40074 |
Display bezel - Covers LCD display |
| C5374-40068 |
Pen door flag - Attached to sensor PC board - Used to detect an open cartridge access door |
| C5374-40058 |
I/O port cover - Has cutout for centronics connector |
| C5374-40056 |
Feed roller clutch |
| C5374-40055 |
Feed roller gear |
| C5374-40054 |
PC board bracket for scanner lamp |
| C5374-40051 |
Scanner assembly retainer clip |
| C5374-40050 |
Scanner CCD PC board shield |
| C5374-40048 |
Paper tray panel (left tray cap) - Attaches to left edge of output tray |
| C5374-40047 |
Paper tray right outer panel (Right tray cap) - Attaches to the right edge of the output tray |
| C5374-40044 |
Rear Case - Has Cutout for LIU Assembly (P/O Rear Case |
| C5374-40038 |
Feed roller shaft - Installed over lower ADF feed roller |
| C5374-40021 |
Roller bushing for HP OfficeJet K60 |
| C5374-40019 |
Roller drive gear |
| C5374-40018 |
Gear cluster (Dual gear) |
| C5374-40015 |
Motor drive gear (Dual gear) |
| C5374-40008 |
Lower ADF chassis - Large interior case part - Items such as the scanner assembly, ADF feed roller, prescan roller, and postscan roller mount on this part |
| C5374-40006 |
Case for OfficeJets |
| C5374-40005 |
Case for OfficeJets |
| C5374-1191belt |
Belt on scanner assembly drive assembly side to side |
| C5374-1101belt |
Carriage belt drives carriage side to side |
| C5374-00052 |
Ground strap - Connects the logic PC board ground plane to the ADF mechanism |
| C5374-00033 |
Clip for OfficeJets |
| C5374-00022 |
Base extender - Metal item used to connect logic PC board ground plane to print mechanism chassis |
| C5374-00019 |
Ground plane - Provides ground and support for the logic PCA |
| C5370-60837 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Korean |
| C5370-60836 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Portuguese |
| C5370-60835 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Dutch |
| C5370-60834 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Finnish |
| C5370-60833 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Norwegian |
| C5370-60832 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Swedish |
| C5370-60831 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Danish |
| C5370-60830 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Italian |
| C5370-60829 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Spanish |
| C5370-60828 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - French |
| C5370-60827 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - German |
| C5370-60826 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - English |
| C5365-90000 |
C5365A, C5367A and C5369A HP OfficeJet Pro 1175C users guide (English) |
| C5365-80612 |
Antistatic brush |
| C5365-80607 |
Cable assembly - 8-pin (F) molex connector to 8-pin (M) mini-DIN connector - 66cm (26in) long |
| C5365-69025 |
Replacement automatic document feeder assembly - Includes input tray, motors, interface cable, PC Board and all other parts of the ADF assembly |
| C5365-60632 |
Input extender tray assembly |
| C5365-60629 |
Flag and cable assembly - Media sensor |
| C5365-40642 |
Paper length adjustment stop - Mounts on the left rear side of the ADF paper input slot |
| C5365-40640 |
Serial cable retaining clip |
| C5364-90000 |
C5364A, C5366A and C5368A HP OfficeJet Pro 1170C users guide (English) |
| C5364-80301 |
Scanner trailing cable |
| C5364-69011 |
Scanner carriage assembly - Includes scanner bulb assembly |
| C5364-69006 |
Carriage motor - Provides power for carriage belt |
| C5364-69002 |
Main logic board |
| C5364-60538 |
Self paced training kit for OfficeJet Pro 1150/1170/1175 series |
| C5364-60339 |
Input/output paper tray assembly |
| C5364-60337 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Korean |
| C5364-60336 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Portuguese |
| C5364-60335 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Dutch |
| C5364-60334 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Finnish |
| C5364-60333 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Norwegian |
| C5364-60332 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Swedish |
| C5364-60331 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Danish |
| C5364-60330 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Italian |
| C5364-60329 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Spanish |
| C5364-60328 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - French |
| C5364-60327 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - German |
| C5364-60326 |
Control panel bezel (Overlay) - Snaps on top of the control panel assembly - English |
| C5364-60324 |
Control panel assembly - Mounts to the front panel - Does NOT include the bezel or ribbon cable |
| C5364-60316 |
Cable assembly - Has one 4-pin (M) connector and one 4-pin (F) connector - 25.4cm (10in) long |
| C5364-60314 |
Cable assembly - Has 9-pin (F) connectors - 10.7cm (4.2in) long |
| C5364-60313 |
Ribbon cable - Has 10-pin (M) edge connectors - 69.9cm (27.5in) long |
| C5364-60312 |
Power supply PC board |
| C5364-60302 |
Main Logic Board - Mounts on Rear of Main Chassis Assembly |
| C5364-40316 |
Rear panel - Mounts to the rear of the lower main chassis |
| C5364-40306 |
Ribbon cable retaining clip |
| C5364-20312 |
Scanner rod - Shaft that the scanner carriage assembly rides on |
| C5364-00313 |
Scanner rod retaining clip |
| C5324-69006 |
Print mechanism assembly - Includes motors, carriage drive belt, carriage assembly, service station, sled, starwheel assembly, and pen driver PC board |
| C5324-60110 |
Right side case (Flint Gray) |
| C5324-60024 |
Carriage drive motor assembly (includes gear only for gray carriage drive belt with very small teeth) |
| C5324-60010 |
Media chassis assembly (Paper drive) - Moves paper from ADF assembly to scanner assembly - Includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs |
| C5324-60009 |
Scanner cover assembly (Upper ADF) - Has soft yellow plastic rollers - Helps to feed documents over the scanner assembly |
| C5324-60004 |
Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges |
| C5324-60003 |
Print cartridge service station assembly |
| C5324-40045 |
Carriage belt clip |
| C5324-40044 |
Carriage drive belt (Gray with very small teeth) - For use only with matching carriage motor and carriage belt clip |
| C5324-40030 |
Lower back case (Flint Gray) - Rear panel |
| C5324-40029 |
Lower front case (Flint Gray, U-shaped) - Supports the media output tray |
| C5324-40028 |
Media output tray - Flint Gray |
| C5319-80014 |
Telephone cable (Israel) |
| C5319-80012 |
Telephone cable - One 4-pin (M) connector to RJ-11 (F) connector adapter and one 3.0m (9.8ft) long cable with RJ-11 (M) connectors on each end (Korea) |
| C5319-80011 |
Telephone cable - One 3-pin (M) connector to RJ-11 (F) connector adapter and one 3.0m (9.8ft) long cable with RJ-11 (M) connectors on each end (Australia) |
| C5319-80008 |
Telephone cable - Has a 4-pin (M) connector for the wall socket and a 6-pin (M) RJ-11 connector - 2.9m (9.7ft) long (New Zealand) |
| C5319-80006 |
Telephone cable (South Africa) |
| C5319-80005 |
Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) |
