| Part |
Picture |
Description |
| C3801-00019 |
Spring for the carriage belt tension arm |
| C3801-00012 |
Base - Sheet metal used as bottom of unit |
| C3801-00003 |
Encoder strip spring |
| C3800-60013 |
Label - for 10 One-Touch Buttons on Front Panel |
| C3800-60001 |
Control panel panel assembly - Does NOT include the overlay |
| C3800-40003 |
Clear overlay - For 10 One-touch buttons on front panel |
| C3500-60003 |
Input paper tray assembly |
| C2991A |
IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
| C2990A |
IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
| C2951A |
IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2950A |
IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2947A |
IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long |
| C2946A |
8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector. |
| C2891-90020 |
C2890A/C2891A OfficeJet/OfficeJet LX service manual (English) |
| C2890-90001 |
C2890A OfficeJet Users Guide (English) |
| C2890-80026 |
Ink absorber for HP OfficeJet 330 Series |
| C2890-80023 |
Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong) |
| C2890-80020 |
Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands) |
| C2890-80018 |
Telephone cable (five conductor) - RJ-11 (M) to GIGOGNE (M/F) - 3m (9.8ft) long (France) |
| C2890-80014 |
Clutch spring for HP OfficeJet 300 Series |
| C2890-80007 |
Window for HP OfficeJet 300 Series |
| C2890-69177 |
Print mechanism - Does not include automatic document feeder parts, paper drive assembly parts, scanner parts, or trays |
| C2890-60299 |
LIU (Line interface unit) module (United kingdom) |
| C2890-60298 |
LIU (Line interface unit) module (Netherlands) |
| C2890-60297 |
LIU (Line interface unit) module (Germany) |
| C2890-60291 |
Main PC board shield |
| C2890-60265 |
Base assembly for HP OfficeJet 330 Series |
| C2890-60264 |
LIU (Line interface unit) module (Korea) |
| C2890-60263 |
LIU (Line interface unit) module (Canadian French) |
| C2890-60262 |
LIU (Line interface unit) module (Canadian English) |
| C2890-60261 |
LIU (Line interface unit) module (Mexico) |
| C2890-60260 |
LIU (Line interface unit) module (Australia) |
| C2890-60238 |
Paper motor power cable |
| C2890-60229 |
Control panel overlay (Korea) |
| C2890-60202 |
Control panel overlay (French, Canadian French) |
| C2890-60193 |
Stripper roller - Large diameter roller on a shaft in lower document feeder assembly |
| C2890-60165 |
Control panel overlay (Mexico) |
| C2890-60160 |
Document catch tray - Installs in place of output tray cover to catch original document that is being copied or faxed - Includes installation instruction sheet |
| C2890-60154 |
Control panel panel assembly - Does NOT include the overlay |
| C2890-60126 |
Upper automatic document feeder assembly |
| C2890-60107 |
Main PC Board for HP CZ296B |
| C2890-60102R |
Main PC board for HP OfficeJet 330 Series |
| C2890-60084 |
Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly |
| C2890-60083 |
Pen driver PC board |
| C2890-60082 |
Carriage assembly - Includes flex cable and bushings |
| C2890-60081 |
Spittoon assembly - Includes absorber |
| C2890-60080 |
Service station assembly - Includes service station base (frame) and sled retainer |
| C2890-60079 |
Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position |
| C2890-60078 |
Clutch actuator |
| C2890-60076 |
Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism |
| C2890-60064 |
Top cover/access door - Includes fax/copy input tray and flip out extension for legal size documents |
| C2890-60063 |
Scanner module assembly - Includes lens cover, scanner LED array, LED window, and scanner module assembly base |
| C2890-60052 |
Print mechanism chassis assembly - The base structure of the print mechanism |
| C2890-60049 |
Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers |
| C2890-60042 |
Control panel overlay (UK) |
| C2890-60027 |
Line interface unit (LIU) replacement kit - Includes plug-in fax/phone line module and replacement instructions - Does NOT come with LIU to wall socket cable (for the U. K. ) |
| C2890-60023 |
Pen driver ribbon cable - 27cm (10.5in) long |
| C2890-60016 |
Control Panel Overlay (English) |
| C2890-60015 |
Speaker Assembly - Installed in Right Side of Base |
| C2890-60013 |
Power input connector and cable assembly |
| C2890-60011 |
Power supply board cable - Has two 12-pin (F) connectors - 5.5cm (2.2in) long |
| C2890-60010 |
Drive roller - Small diameter roller on a shaft in lower document feeder assembly |
| C2890-60006 |
Paper output tray |
| C2890-60005 |
Paper input tray |
| C2890-60004 |
Scanner LED array PC board |
| C2890-60001 |
ADF paper drive motor |
| C2890-40108 |
OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers |
| C2890-40107 |
Power supply shield |
| C2890-40077 |
Envelope sensor |
| C2890-40076 |
Adjuster - Used to adjust pen-to-paper spacing |
| C2890-40075 |
Center lifter cap - Holds the pressure plate lifter and the kicker spring in place |
| C2890-40073 |
Kicker - Restacks the paper in the paper input tray after the top sheet is removed |
| C2890-40072 |
Separator peg - Lifts the separator pad when the lifter shaft lifts |
| C2890-40071 |
Separator lifter - Installed between the separator and the pressure plate lifter |
| C2890-40070 |
Lever arm - Used to lift the pressure plate lifter |
| C2890-40068 |
Left/right lifter cap - Holds the pressure plate lifter in place |
| C2890-40067 |
Rotation limiter - Limits the rotation of the pivot |
| C2890-40063 |
Belt tension bracket - Holds the carriage belt idler pulley |
| C2890-40057 |
Volume control slider |
| C2890-40056 |
Insulator - Installed under power supply board |
| C2890-40054 |
Output tray cover |
| C2890-40050 |
Width sensor flag - Mounts in the main PC board |
| C2890-40049 |
Friction pad - Mounts on the rear of the upper document feed assembly |
| C2890-40042 |
Bushing - Supports ends of the driver roller and stripper roller |
| C2890-40038 |
Lens cover - Installed near the rear of the scanner module assembly |
| C2890-40036 |
Flip-out paper input extension tray |
| C2890-40031 |
Clutch drum - Installed between clutch spring and left bushing on shaft of stripper roller |
| C2890-40020 |
Lower automatic document feeder cover |
| C2890-40017 |
Stripper gear for HP OfficeJet 330 Series |
| C2890-40016 |
Kickout gear for HP OfficeJet 330 Series |
| C2890-40015 |
Feed gear for HP OfficeJet 330 Series |
| C2890-40014 |
Cluster gear C |
| C2890-40013 |
Cluster gear B |
| C2890-40012 |
Cluster gear A |
| C2890-40001 |
Main cover - Covers front, rear and both sides - Does not include other items such as top access cover, control panel, overlay, or paper trays |
| C2890-20006 |
Lever arm spring - Provides tension between the lever arm and the pressure plate lifter |
| C2890-00121 |
Serial Number Label - Attached to Rear of Main Cover |
| C2890-00104 |
Stripper spring - Holds pressure against separation pad |
| C2890-00091 |
Spring latch - On side of scanner module |
| C2890-00074 |
Centronics connector shield |
| C2171-67806 |
Idler pulley - Holds left end of carriage belt |
| C2170-90099 |
DeskJet family technical reference manual - Lists PCL 3 printer commands for DeskJets and OfficeJets |
| C2170-00008 |
Right bracket - Carriage rod adjustment bracket (Right) |
| C2170-00002 |
Carriage rod retainer - Holds left end of carriage rod |
| C2165-00001 |
Left bracket - Carriage rod adjustment bracket (Left) |
| C2164-60045 |
Paper stepper motor assembly (does NOT include cable) |
| C2164-40060 |
Carriage belt for HP DeskJet 550C Series |
| C2162-40002 |
Cluster gear for HP DeskJet 500 Series |
| C2162-20005 |
Carriage rod - Supports horizontal carriage movement |
| C2145-80016 |
Encoder strip - Carriage position sensor reference |
