| Part |
Picture |
Description |
| C7769-60151 |
PRINTHEAD CARRIAGE ASSEMBLY - INCLUDES CARRIAGE, BUSHINGS, PEN LATCHES, CARRIAGE POSITION SENSOR, AND LINE SENSOR |
| C7769-60152 |
PAPER AXIS MOTOR ASSEMBLY - INCLUDES CABLESPAPER AXIS MOTOR ASSEMBLY - INCLUDES CABLES |
| C7769-60153 |
INK TUBES ASSY 24 SV MONO (BLACK AND WHITE PLOTTERS ONLY) FOR THE 24-INCH DESIGNJET 500/800 PRINTER SERIES |
| C7769-60154 |
TOP COVER ASSEMBLY (GRAY) - FOR THE 24-INCH DESIGNJET 500 PRINTER SERIES |
| C7769-60155 |
BACK PLATEN ASSEMBLY - CURVED COVER/GUIDE THAT IS INSTALLED BELOW THE PAPER DRIVE ROLLER - FOR USE WITH 24-INCH PLOTTERS |
| C7769-60156 |
SERVICE STATION BRACKET - INSTALLED ON RIGHT-SIDE OF SERVICE STATION |
| C7769-60157 |
PAPER DRIVE ROLLER KIT - INCLUDES ROLLER ASSEMBLY, BUSHINGS, |
| C7769-60158 |
LEFT END COVER AND EIO COVER (GRAY) COVER WHITE (SVC) - RIGHT COVER LEFT END COVER AND EIO COVER - WHITE OR GRAY PLASTIC COVER ON LEFT SIDE |
| C7769-60159 |
RIGHT SIDE COVER (GRAY) - FOR THE DESIGNJET 500 PRINTER SERIES ONLY |
| C7769-60160 |
TRIM KIT - INCLUDES THE FRONT AND BACK TRIMS FOR THE LEFT AND RIGHT SIDES - INSTALLED BETWEEN THE MAIN PRINTER CHASSIS AND THE LEFT OR RIGHT END COVERS |
| C7769-60161 |
CONTROL PANEL ASSEMBLY - INCLUDES RIBBON CABLE AND ENGLISH OVERLAY MARKED WITH MENU, BACK, ENTER, CANCEL, AND FORM FEED AND CUT |
| C7769-60162 |
ROLLFEED MOUNT KIT - INCLUDES LEFT AND RIGHT HOUSING |
| C7769-60163 |
CUTTER ASSEMBLY FOR HEWLETT PACKARD PLOTTERS DESIGNJET MODELS. |
| C7769-60164 |
SETUP PRINTHEAD KIT - USED TO PRIME THE INK TUBES - INCLUDES 4 SETUP PRINTHEADS. USED TO REMOVE AIR AND PRIME THE INK SYSTEM |
| C7769-60165 |
LEFT SPITTOON ASSEMBLY - CONTAINS ABSORBERS WHICH HOLD EXCESS INK FROM PRINTHEADS |
| C7769-60167 |
MEDIA DEFLECTOR KIT - INSTALLED IN FRONT OF PINCH-WHEELS - |
| C7769-60168 |
MEDIA SENSOR - INSTALLED IN THE FRONT OF THE REAR PLATEN |
| C7769-60169 |
CUTTER BUSHING FOR HP DESIGNJET 510PS |
| C7769-60170 |
LEFT CUTTER GUIDE BRACKET AND LEFT ENCODER HOLDER KIT |
| C7769-60171 |
COVER KIT FOR DRIVE ROLLER ENCODER SENSOR |
| C7769-60172 |
DRIVE ROLLER ENCODER SENSOR |
| C7769-60173 |
INTERCONNECT PC BOARD INTERCONNECT PC BOARD - INSTALLED IN RIGHT-SIDE OF PRINTER |
| C7769-60174 |
FRONT PLATEN KIT - INCLUDES PLATENS FOR BOTH THE 24-INCH AND THE 42-INCH MODELS |
| C7769-60175 |
PINCHARM ASSEMBLY WITH WHEELS |
| C7769-60176 |
BELT TENSIONER KIT - KEEPS CARRIAGE BELT TIGHT - INCLUDES PULLEY AND PULLEY MOUNT BRACKET |
| C7769-60177 |
PAPER DRIVE TRANSMISSION GEAR KIT - INCLUDES TWO GEARS USED TO DRIVE THE PAPER DRIVE ROLLER |
| C7769-60179 |
CUTTER GUIDE - GUIDE BAR FOR THE CUTTER ASSEMBLY - FOR 24-INCH PLOTTERS |
| C7769-60180 |
RIBBON CABLE KIT - INCLUDES INSTALLATION INSTRUCTIONS AND RIBBON CABLE WITH FERRITE - CABLE HAS 40 PIN (F) CONNECTORS - 1.6M (5.1FT) LONG. |
| C7769-60181 |
PINCHARM LIFT MECHANISM - INCLUDES CAM (A LONG BAR) , CAM BUSHINGS, PINCH ARM LEVER, PINCH ARM LEVER BUSHING |
| C7769-60182 |
CARRIAGE BELT - DRIVES THE CARRIAGE ASSEMBLY - FOR USE WITH 24-INCH PLOTTERS |
| C7769-60183 |
ENCODER STRIP (24-INCH) HEWLETT PACKARD DESIGNJET 500 / 510 / 800 ENCODER STRIP 24 INCH PLOTTER. |
| C7769-60194 |
PINCHARM SENSOR - PINCHARM SENSOR - INSTALLED IN RIGHT FRONT OF PRINT CHASSIS |
| C7769-60219 |
FOOT BRACE ASSEMBLY - FOR USE WITH 24-INCH PLOTTERS;CLICK TO ORDER THE FUNCTIONAL EQUIVALENT: CH336-67013 |
| C7769-60242 |
24-INCH ROLLFEED SPINDLE ROD ASSEMBLY - INCLUDES SPINDLE, HUBS, AND END CAPS |
| C7769-60243 |
42-INCH ROLLFEED SPINDLE ROD ASSEMBLY - INCLUDES SPINDLE HUBS AND END CAPS |
| C7769-60244 |
64MB SO-DIMM MEMORY MODULE HP DESIGNJET 500 / 800 144PIN PC100 MEMORY MODULE INSTALLS INTO THE FORMATTER EIO BOARD. |
| C7769-60245 |
128MB SO-DIMM MEMORY MODULE - CAN BE INSTALLED ONLY INTO THE FORMATTER BOARD. 128MB SDRAM 100MHZ CL2 |
| C7769-60254 |
ENCODER DISK ASSEMBLY - HELPS PROVIDE POSITION THE INFORMATION OF THE PAPER |
| C7769-60256 |
INK TUBES ASSEMBLY / MONO BLACK ONLY. - FOR THE 24-INCH DESIGNJET 500/800 PRINTER SERIES - INK TUBES ASSY 24 - SVC |
| C7769-60260 |
FORMATTER UPGRADE KIT - ADDS HP-GL/2 DESIGNJET 500 800 SERIES GL/2 CARD C7772A - PLUGS INTO AN EIO CARD SLOT. GL-2 AND RTL FORMATTER HP-GL/2 AND RTL FORMATTER PC BOARD |
| C7769-60272 |
PRINTHEAD CARRIAGE ASSEMBLY - INCLUDES CARRIAGE, BUSHINGS, PEN LATCHES, CARRIAGE POSITION SENSOR, AND LINE SENSOR |
| C7769-60273 |
DESIGNJET 500/800 WHEEL KIT - METAL BAR WITH TWO ATTACHED WHEELS - USED WITH THE 24 INCH STAND ONLY |
| C7769-60276 |
PAPER DRIVE ROLLER KIT - INCLUDES ROLLER ASSEMBLY, BUSHINGS, GEAR ON ROLLER, TRANSMISSION GEAR KIT, ENCODER DISC, END THRUST (AXIAL) SPRING, LINT FREE CLOTH, RUBBER GLOVE, AND INSTRUCTION SHEETS - FOR 24-INCH MODEL |
| C7769-60283 |
MEDIA DEFLECTOR KIT - KIT INCLUDES THREE DEFLECTORS |
| C7769-60289 |
MEDIA DEFLECTOR HOLDERS - FOR THE DESIGNJET 500/800 PRINTER SERIES |
| C7769-60295 |
CARRIAGE ASSEMBLY TRAILING CABLE FOR 24-INCH PLOTTERS FLAT RIBBON CABLE / COMMUNICATION CABLE FROM CARRIAGE UNIT TO BOARD UNIT. TRAILING CABLE. |
| C7769-60298 |
RIBBON CABLE KIT - INCLUDES INSTALLATION INSTRUCTIONS AND RIBBON CABLE WITH FERRITE - CABLE HAS 40 PIN (F) CONNECTORS - 1.6M (5.1FT) LONG |
| C7769-60299 |
LEFT END COVER AND EIO COVER (GRAY) |
| C7769-60300 |
FORMATTER PC BOARD FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2 AND FIRMWARE) FORMATTER FITS FOR HP DESIGNJET PLOTTERS FIX ERROR: 05:10 |
| C7769-60305 |
CARRIAGE ASSEMBLY TRAILING CABLE FOR 24-INCH PLOTTERS FLAT RIBBON CABLE / COMMUNICATION CABLE FROM CARRIAGE UNIT TO BOARD UNIT. TRAILING CABLE. |
| C7769-60306 |
OEM DESIGNJET 500/800 MAINTENANCE KIT - CONTAINS LUBRICANT GLOVES COTTON WIPE SPRING TENSIONER FOAMS TUBES BELT ENCODER STRIP SETUP PENS TRAILING CABLE SERVICE STATION CUTTER AND CARRIAGE - FOR 24 INCH MODEL ONLY (OEM LIMITED SUPPLY) |
| C7769-60307 |
CLEANING KIT FOR BELT |
| C7769-60373 |
INK SUPPLY STATION (ISS) - INCLUDES INK PUMP MOTOR, PUMP SENSOR, AND OUT-OF-INK SENSORS - INSTALLED IN RIGHT SIDE OF PRINTER |
| C7769-60374 |
SERVICE STATION - INCLUDES WIPERS, PEN CAPS, AND THE RIGHT HAND SPITTOON - INSTALLED IN RIGHT SIDE OF PRINTER |
| C7769-60375 |
CARRIAGE (SCAN-AXIS) MOTOR ASSEMBLY - INCLUDES CABLE |
| C7769-60376 |
PRINTHEAD CARRIAGE ASSEMBLY - INCLUDES CARRIAGE, BUSHINGS, PEN LATCHES, CARRIAGE POSITION SENSOR, AND LINE SENSOR |
| C7769-60377 |
PAPER AXIS MOTOR ASSEMBLY - INCLUDES CABLESPAPER AXIS MOTOR ASSEMBLY - INCLUDES CABLES |
| C7769-60378 |
PINCHARM SENSOR - INSTALLED IN RIGHT FRONT OF PRINT CHASSIS |
| C7769-60379 |
MEDIA SENSOR - INSTALLED IN THE FRONT OF THE REAR PLATEN |
| C7769-60380 |
ROLLFEED MOUNT KIT - INCLUDES LEFT AND RIGHT HOUSING |
| C7769-60381 |
INK TUBES ASSY 24 SV - RCINK TUBES ASSEMBLY - INCLUDES 4 INK TUBES COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS (CARRIAGE CRANE AND INK SUPPLY STATION CRANE), AND 4 SETUP PENS - FOR THE 24-INCH DESIGNJET 500/800 PRINTER SERIES |
| C7769-60382 |
CONTROL PANEL ASSEMBLY - INCLUDES RIBBON CABLE AND ENGLISH OVERLAY MARKED WITH MENU; BACK; ENTER; CANCEL AND FORM FEED/CUT |
| C7769-60384 |
DRIVE ROLLER ENCODER SENSOR |
| C7769-60385 |
INTERCONNECT PC BOARD - INSTALLED IN RIGHT-SIDE OF PRINTER |
| C7769-60387 |
POWER SUPPLY ASSEMBLY FOR DESIGNJET - INCLUDES POWER SWITCH. (PWR SUPPLY FOR COPIER MODULE IS Q1278-60072) |
| C7769-60390 |
CUTTER ASSEMBLY FOR HEWLETT PACKARD PLOTTERS DESIGNJET MODELS. |
| C7769-60391 |
SERVICE STATION BRACKET - INSTALLED ON RIGHT-SIDE OF SERVICE STATION |
| C7769-60392 |
CARRIAGE BELT (24-INCH),CARRIAGE BELT - DRIVES THE CARRIAGE ASSEMBLY (24-INCH) |
| C7769-60393 |
BELT TENSIONER KIT - KEEPS CARRIAGE BELT TIGHT - INCLUDES PULLEY AND PULLEY MOUNT BRACKET |
| C7769-60394 |
DESIGNJET 500/800 MAINTENANCE KIT - CONTAINS LUBRICANT, GLOVES, COTTON WIPE, SPRING TENSIONER, FOAMS, TUBES, BELT, ENCODER STRIP, SETUP PENS, TRAILING CABLE, SERVICE STATION, CUTTER, AND CARRIAGE - FOR 24 INCH MODEL ONLY (OEM LIMITED SUPPLY) |
| C7769-60401 |
HEWLETT PACKARD (HP)HUB SPINDLE BLUE SVC CAP. CAP SUPPORTS ROLL PAPER, SPINDLE TAKES ONE ON EACH SIDE. PART NUMBER IS FOR ONE PC. |
| C7769-60405 |
HARDWARE KIT - INCLUDES VARIOUS SCREWS AND NUTS FOR THE STAND AND TOUCH SCREEN ASSEMBLY |
| C7769-60406 |
COVER KIT FOR DRIVE ROLLER ENCODER SENSOR |
| C7769-60407 |
VACUUM FAN ASSEMBLY (OEM LIMITED SUPPLY). |
| C7769-60408 |
PAPER DRIVE TRANSMISSION GEAR KIT - INCLUDES TWO GEARS USED TO DRIVE THE PAPER DRIVE ROLLER |
| C7769-60409 |
BRACKET KIT - INCLUDES THE LEFT CUTTER GUIDE BRACKET AND LEFT ENCODER HOLDER |
| C7769-60410 |
BACK PLATEN ASSEMBLY - CURVED COVER/GUIDE THAT IS INSTALLED BELOW THE PAPER DRIVE ROLLER (24-INCHES) |
| C7769-60411 |
FOOT KIT - CONTAINS FOUR RUBBER FEET FOR BOTTOM OF PLOTTER - FOR THE DESIGNJET 500/510/800 PRINTER SERIES |
| C7769-60412 |
PAPER DRIVE ROLLER KIT - INCLUDES ROLLER ASSEMBLY, BUSHINGS, GEAR ON ROLLER, TRANSMISSION GEAR KIT, ENCODER DISC, END THRUST (AXIAL) SPRING, LINT FREE CLOTH, RUBBER GLOVE, AND INSTRUCTION SHEETS - FOR 24-INCH MODEL |
| C7769-60413 |
LEFT END COVER AND EIO COVER - WHITE PLASTIC COVER ON LEFT SIDE |
| C7769-60436 |
RIGHT-END COVER SV GRAY |
| C7769-60437 |
TOP COVER + WINDOW 24 |
| C7769-60438 |
DEFLECTOR KIT GRAY |
| C7769-60439 |
COVER GRAY SV FOR HP DESIGNJET 500 |
| C7769-60441 |
FORMATTER UPGRADE KIT - ADDS HP-GL/2 DESIGNJET 500 800 SERIES GL/2 CARD C7772A - PLUGS INTO AN EIO CARD SLOT. GL-2 AND RTL FORMATTER HP-GL/2 AND RTL FORMATTER PC BOARD |
| C7769-60454 |
TOP COVER + WINDOW (24 INCH) |
| C7769-60455 |
FAKE PENS - SVC |
| C7769-60459 |
PHOENIX INK SUPPLY STATION SV |
| C7769-60460 |
RIGHT-END COVER MONO |
| C7769-60461 |
COVER WHITE (SVC) MONO |
| C7769-60462 |
FRONT PANEL SV MONO |
| C7769-60463 |
INK TUBES ASSY 24 MONO ( BLACK AND WHITE PLOTTERS ONLY). |
| C7769-60464 |
PREVENTIVE MAINTE KIT 24 PREVENTIVE MAINTE KIT 24 MONO |
| C7769-67002 |
SWITCH POWER CORD - SV |
| C7769-69143 |
FORMATTER PC BOARD FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2 AND FIRMWARE) FORMATTER FITS FOR HP DESIGNJET PLOTTERS FIX ERROR: 05:10 |
| C7769-69260 |
FORMATTER PC BOARD EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2 AND FIRMWARE) |
| C7769-69272 |
PRINTHEAD CARRIAGE ASSEMBLY - INCLUDES CARRIAGE, BUSHINGS, PEN LATCHES, CARRIAGE POSITION SENSOR, AND LINE SENSOR |
| C7769-69300 |
FORMATTER PC BOARD FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2) |
| C7769-69376 |
PRINTHEAD CARRIAGE ASSEMBLY - INCLUDES CARRIAGE, BUSHINGS, PEN LATCHES, CARRIAGE POSITION SENSOR, AND LINE SENSOR |
| C7769-69441 |
FORMATTER POWER HPGL2 SV - HP-GL/2 AND RTL (RASTER TRANSFER LANGUAGE) FORMATTER PC BOARD. |
| C7769-90066 |
DESIGNJET SUPPORT DVD-ROM - VERSION A.04.01 - HAS PRODUCT INFORMATION, USER'S MANUALS, SERVICE MANUALS, DIAGNOSTIC SOFTWARE, TEST DRAWINGS, NEWSLETTERS, AND SERVICE NOTES |
| C7769-90217 |
DJ 500/800/PS TRNG KT |
| C7769-90221 |
SOFTWARE FOR DESIGNJET 500, DESIGNJET 800 SERIES, DESIGNJET COPIER CC800PS, DESIGNJET 815 MFP |
| C7769B |
HP DESIGNJET 500 24-IN ROLL PRINTER |
| C7769C |
HP DESIGNJET 500PS 24-IN ROLL PRINTER |
| C7769E |
HP DESIGNJET 500 MONO 24-IN ROLL PRINTER |
| C7769F |
HP DESIGNJET 500 PLUS 24-IN ROLL PRINTER |
| C7769G |
HP DESIGNJET 500PS PLUS 24-IN PRINTER |
| C7770-60013 |
ENCODER STRIP - FOR USE WITH 42-INCH PLOTTERS |
| C7770-60014 |
CARRIAGE BELT - DRIVES THE CARRIAGE ASSEMBLY - FOR USE WITH 42-INCH PLOTTERS |
| C7770-60015 |
PINCHARM LIFT MECHANISM - INCLUDES CAM (A LONG BAR) , CAM BUSHINGS, PINCH ARM LEVER, PINCH ARM LEVER BUSHING |
