| Part |
Picture |
Description |
| C3190-60004 |
SPITTOON ASSEMBLY - CONTAINS ABSORBERS WHICH HOLD EXCESS INK FROM CARTRIDGES |
| C3190-60012 |
COVER SENSOR ASSEMBLY |
| C3190-60013 |
INK SEPARATOR ASSEMBLY - EIGHT TUBES PLUG INTO SEPARATOR |
| C3190-60040 |
OVERDRIVE ROLLER - SHAFT WITH ROLLERS - RUNS THE WIDTH OF THE PLOTTER |
| C3190-60051 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (ENGLISH) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60052 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (KOREAN) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60053 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (THAI) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60054 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (GERMAN) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60055 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (FRENCH) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60056 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (SPANISH) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60057 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (ITALIAN) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60058 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (JAPANESE) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60059 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (PORTUGUESE) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60060 |
C3190A AND C3191A DESIGNJET 250C USERS MANUAL (CHINESE) - INCLUDES CONTROL PANEL OVERLAY (NOT SOLD SEPARATELY) |
| C3190-60082 |
REAR COVER - HAS CUTOUTS TO ACCESS SIMM SLOT, INTERFACE CONNECTORS, AND AC RECEPTACLE |
| C3190-60095 |
BAIL ASSEMBLY - INCLUDES BAIL, STARWHEELS, AND BRACKETS |
| C3190-60096 |
OVERDRIVE ROLLER - SHAFT WITH ROLLERS - RUNS THE WIDTH OF THE PLOTTER AND INCLUDES OVERDRIVE HOUSING |
| C3190-60106 |
ENCODER STRIP ASSEMBLY (D-SIZE) - INCLUDES ENCODER STRIP AND ENCODER STRIP SPRING |
| C3190-60111 |
SELF PACED TRAINING KIT FOR DESIGNJET 230/250/330/350 |
| C3190-60130 |
SENSOR MECHANISM - DOES NOT INCLUDE THE MEDIA SENSOR ASSEMBLY |
| C3190-60132 |
IDLER PULLEY - FOR MAIN DRIVE BELT - ON LEFT END OF PLOTTER - INCLUDES PULLEY, SHAFT AND SPACER |
| C3190-60137 |
TUBEAXIAL FAN FOR HP DESIGNJET 750C SERIES |
| C3190-60138 |
OVERDRIVE AND BAIL KIT - INCLUDES LEFT AND RIGHT BAIL BRACKETS, 10 STARWHEEL MOUNT ASSEMBLIES, BAIL LIFT MECHANISM KIT, OVERDRIVE ROLLER, OVERDRIVE ENCLOSURE, MEDIA GUIDES |
| C3190-60140 |
MEDIA SENSOR MECHANICAL ASSEMBLY |
| C3190-60142 |
SERVICE STATION ASSEMBLY HP DESIGNJET 330 350 430 450C 488 PLOTTER UNITS. |
| C3190-60143 |
CARRIAGE ASSEMBLY - INCLUDES CARRIAGE PC BOARD |
| C3190-60144 |
CONTROL PANEL ASSEMBLY - MOUNTS IN RIGHT SIDE COVER - INCLUDES CONTROL PANEL, PANEL SUPPORT, AND COVER SENSOR |
| C3190-60145 |
CARRIAGE MOTOR ASSEMBLY |
| C3190-60149 |
LEFT CAM JOURNAL - MOUNTED ON LEFT END OF PINCH ARM SHAFT |
| C3190-60155 |
GREASE - GREASE APPLICATION KITGREASE - FOR HELICAL GEAR (DRIVE ROLLER GEAR) |
| C3190-60168 |
ROM SIMM (REV A.01.06) - PLUGS INTO MAIN LOGIC BOARD SLOT |
| C3190-60169 |
MEDIA MOTOR/ENCODER ASSEMBLY - INCLUDES MOTOR POWER CABLE |
| C3190-69139 |
ELECTRONICS MODULE - CONTAINS POWER SUPPLY, COOLING FAN, MAIN LOGIC PC BOARD, AND INTERFACE CONNECTORS |
| C3190-80010 |
BELT TENSIONER SPRING |
| C3190-80013 |
BAIL CABLE SPRING |
| C3190-90102 |
TRAINING TEST FOR DESIGNJET 350, DESIGNJET 330, DESIGNJET 230 D SIZE, DESIGNJET 230 E SIZE |
| C3190-90157 |
C3190/91A DESIGNJET 250C, C4694/5A DESIGNJET 230, C4701/02A DESIGNJET 330 AND C4699A/C4700A DESIGNJET 350C - COMBINED SERVICE MANUAL UPDATE |
| C3190A |
HP DESIGNJET 250C PRINTER (D/A1-SIZE) |
| C3191-40048 |
CARRIAGE BELT ASSEMBLY E-SIZE FOR 36 INCH PLOTTERS. LONG/WIDE BELT ATTACHED TO THE CARRIAGE. |
| C3191-60040 |
OVERDRIVE ROLLER - SHAFT WITH ROLLERS - RUNS WIDTH OF PLOTTER |
| C3191-60082 |
REAR COVER - HAS CUTOUTS TO ACCESS SIMM SLOT, INTERFACE CONNECTORS, AND AC RECEPTACLE |
| C3191-60095 |
BAIL ASSEMBLY - INCLUDES BAIL, STARWHEELS, AND BRACKETS |
| C3191-60096 |
OVERDRIVE ROLLER - SHAFT WITH ROLLERS - RUNS THE WIDTH OF THE PLOTTER AND INCLUDES OVERDRIVE HOUSING |
| C3191-60138 |
OVERDRIVE AND BAIL KIT - INCLUDES LEFT AND RIGHT BAIL BRACKETS, 14 STARWHEEL MOUNT ASSEMBLIES, BAIL LIFT MECHANISM KIT, OVERDRIVE ROLLER, OVERDRIVE ENCLOSURE, MEDIA GUIDES |
| C3191A |
HP DESIGNJET 250C PRINTER |
| C3192-60001 |
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS |
| C3192A |
DESIGNJET 230/250C OPTIONAL STAND (D/A1) - INCLUDES LEGS, CASTERS AND BRACE - DOES NOT INCLUDE THE PAPER BIN |
| C3193-60001 |
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS |
| C3193A |
DESIGNJET 230/250C OPTIONAL STAND (E/A0) - INCLUDES LEGS, CASTERS, BRACE, WIRE FORM PAPER DEFLECTOR, AND PAPER BIN |
| C3195+49A-60001 |
TRAINING KIT FOR DESIGNJET 700 SERIES, DESIGNJET 750, DESIGNJET 755 |
| C3195+49A-60002 |
TRAINING KIT FOR DESIGNJET 750, DESIGNJET 700 SERIES, DESIGNJET 755 |
| C3195-00009 |
SIMM SLOT ACCESS COVER - METAL COVER THAT MOUNTS TO THE BACK COVER/PANEL ON THE ELECTRONIC ENCLOSURE ASSEMBLY |
| C3195-00019 |
NAMEPLATE - DESIGNJET 750C PRINTER LOGO |
| C3195-00031 |
SHIPPING MATERIAL/CARTON FOR DESIGNJET 700 SERIES, DESIGNJET 750 |
| C3195-00057 |
SAFETY LABEL - PROVIDES WARNING THAT ENCODER STRIP IS SHARP |
| C3195-40017 |
CARRIAGE MOTOR BRACKET |
| C3195-40024 |
CABLE HOLDER (SMALL U-SHAPED PIECE ON TOP) - ONE OF TWO PIECES THAT HOLD THE TRAILING CABLE TO THE MAIN CHASSIS |
| C3195-40025 |
CABLE HOLDER (LARGE PIECE ON BOTTOM) - ONE OF TWO PIECES THAT HOLD THE TRAILING CABLE TO THE MAIN CHASSIS |
| C3195-40026 |
RIBBON CABLE CLAMP (TOP HALF) - SECURES THE TRAILING CABLE TO THE TOP OF THE CARRIAGE ASSEMBLY |
| C3195-40027 |
RIBBON CABLE CLAMP (BOTTOM HALF) - SECURES THE TRAILING CABLE TO THE TOP OF THE CARRIAGE ASSEMBLY |
| C3195-40029 |
TRIM LEFT FRONT FOR DESIGNJET 750C D SIZE |
| C3195-40030 |
TRIM RIGHT FRONT FOR DESIGNJET 750C D SIZE |
| C3195-40032 |
MRK ENCODER FOR HP BAIPLY1Z |
| C3195-40039 |
PULLEY WEDGE TENSIONER - FOR CARRIAGE (Y-AXIS) BELT TENSION |
| C3195-40045 |
MEDIA GUIDE (SMALL TRIANGULAR SHAPED PIECE) |
| C3195-40047 |
HOUSING COVER (L-SHAPED) - RIGHT SIDE COVER (CAP) FOR THE POWER SWITCH HOUSING (FOR ENCLOSING THE POWER SWITCH) |
| C3195-40060 |
CENTER COVER LATCH |
| C3195-40064 |
REAR SLIDER ROD BUSHING (SPRING LOADED) - SLIDES INTO THE REAR CENTER OF THE CARRIAGE ASSEMBLY |
| C3195-40066 |
FAN DEFLECTOR - DEFLECTS AIR FROM FAN TO PREVENT PRINTING ERRORS - INSTALLED ON METAL STRUCTURE OF CHASSIS BELOW THE CARRIAGE SLIDER RODS |
| C3195-40076 |
CUTTER BUSHING - CONNECTS CUTTER ASSEMBLY TO SLIDER ROD |
| C3195-60009 |
BAIL STEPPER MOTOR - USED TO DRIVE THE BAIL ASSEMBLY |
| C3195-60014 |
HP DESIGNJET 750C 755CM POSTSCRIPT SIMM |
| C3195-60015 |
SENSOR ASSEMBLY |
| C3195-60027 |
SPITTOON ASSEMBLY - CONTAINS ABSORBERS WHICH HOLD EXCESS INK FROM CARTRIDGES |
| C3195-60029 |
CUTTER ASSEMBLY ENCLOSURE BAR - MOUNTS BETWEEN LEFT AND RIGHT SIDE PLATES OF CHASSIS (MOUNTING BAR FOR THE MEDIA GUIDES) |
| C3195-60038 |
FRONT (CONTROL) PANEL AND CABLE ASSEMBLY FOR HP DESIGNJET PLOTTER. ONLY CONTROL PANEL MAY NOT INCLUDE OVERLAY PLASTIC FACE. |
| C3195-60039 |
COVER ASSEMBLY - METAL CENTER COVER THAT LIFT-UP VIEWING WINDOW MOUNTS TO - INCLUDES T SHAPED LATCHES AND MOUNTING SCREWS |
| C3195-60041 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (ENGLISH) |
| C3195-60042 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (KOREAN) |
| C3195-60043 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (TAIWAN) |
| C3195-60044 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (GERMAN) |
| C3195-60045 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (FRENCH) |
| C3195-60046 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (SPANISH) |
| C3195-60047 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (ITALIAN) |
| C3195-60048 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (JAPANESE) |
| C3195-60049 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (PORTUGUESE) |
| C3195-60050 |
FRONT PANEL OVERLAY (SELF ADHESIVE) - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (CHINESE) |
| C3195-60053 |
BACK COVER/PANEL - METAL COVER FOR THE ELECTRONIC ENCLOSURE ASSEMBLY |
| C3195-60056 |
POWER SUPPLY CABLE - HAS 12-PIN (F) CONNECTORS - 9.5CM (3.7IN) LONG |
| C3195-60057 |
RIBBON CABLE ASSEMBLY (BLACK) - CONTAINS A 12 WIRE 82.6CM (32.5IN) CABLE AND A 14 WIRE 96.5CM (38IN) CABLE - CONNECTORS ARE A 28-PIN (F) CONNECTOR, THREE 6-PIN (F) MARKED SVS, BAIL, AND PRIMER, A 4-PIN (F), AND A 4-PIN (M) |
| C3195-60061 |
MANUAL KIT FOR DESIGNJET 750 |
| C3195-60062 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (KOREAN) |
| C3195-60063 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (FOR TAIWAN) |
| C3195-60064 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (GERMAN) |
| C3195-60065 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (FRENCH) |
| C3195-60066 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (SPANISH) |
| C3195-60067 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (ITALIAN) |
| C3195-60068 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (JAPANESE) |
| C3195-60069 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (PORTUGUESE) |
| C3195-60070 |
DESIGNJET 750C MANUAL KIT - INCLUDES USERS GUIDE, QUICK REFERENCE GUIDE AND FRONT PANEL OVERLAY (CHINESE) |
| C3195-60101 |
MAIN LOGIC BOARD - INCLUDES INTEGRATED RS232-C (SERIAL) AND |
| C3195-60102 |
RIBBON CABLE WITH FERRITE - HAS 5-PIN (F) CONNECTORS - 16.5CM (6.5IN) LONG |
| C3195-60112 |
CARRIAGE DRIVE MOTOR ASSEMBLY - INCLUDES MOTOR AND CABLE |
| C3195-60113 |
REPACKAGING KIT - FOR MAIN PLOTTER UNIT |
| C3195-60116 |
PINCHARM LIFT ASSEMBLY - DOES NOT INCLUDE PINCHARM BAR CAM - INCLUDES PINCHWHEEL MANUAL LIFT HANDLE, SPRING, SENSOR, ROCKER PLATE, CAM DRIVE, CAM JOURNALS, WIRE LINKAGES, NUTS, SCREWS, AND WASHER |
| C3195-60143 |
PEN CARRIAGE ASSEMBLY - DRAFTING HEAD FOR THE PLOTTER (HOLDS TRI-COLOR AND ONE BLACK CARTRIDGE. CARRIAGE ASSEMBLY FOR PLOTTER |
| C3195-60149 |
AC WIRING HARNESS - INCLUDES POWER SWITCH, AC RECEPTACLE, AND CONNECTOR |
| C3195-60151 |
CODE ROM SIMM (FIRMWARE) (VER. A.02.10) - PLUGS INTO SOCKET ON THE MAIN LOGIC BOARD |
| C3195-60162 |
SERVICE STATION ASSEMBLY - FOR CONDITIONING THE INK CARTRIDGES WHEN THE CARRIAGE IS IN ITS HOME POSITION |
| C3195-60165 |
SERVICE STATION ASSEMBLY - FOR CONDITIONING THE INK CARTRIDGES WHEN THE CARRIAGE IS IN ITS HOME POSITION |
| C3195-60166 |
MAINTENANCE KIT - INCLUDES SERVICE STATION (SPITTOON) ASSEMBLY, CARRIAGE (Y-AXIS) MOTOR, ENCODER STRIP, AND LUBRICATING OIL |
