| Part |
Picture |
Description |
| CR357-67065 |
BASKET OUTPUT TRAY ASSEMBLY (UPDATED TO INCLUDE T9X0/TX500 STAND) WHERE PAPER REST AFTER IT HAS BEEN PRINTED |
| CR357-67066 |
BASKET OUTPUT TRAY ASSEMBLY FIGURE # 2 ON PICTURE (UPDATED TO INCLUDE T9X0/TX500 STAND) WHERE PAPER REST AFTER IT HAS BEEN PRINTED. UPGRADED TO ENTIRE STAND UNIT CR357-67094. |
| CR357-67067 |
PINCH ARM TOP ROLLER |
| CR357-67068 |
BUMP CUTTER ACTUATOR ASSEMBLY |
| CR357-67070 |
CARRIAGE LATCH ASSEMBLY / T920/TX500 CARRIAGE LATCH - HOLDS PRINTER CARTRIDGE ON ITS PROPER POSITION ON THE CARRIAGE ASSEMBLY |
| CR357-67072 |
PREVENTIVE MAINTENANCE KIT - INCLUDES SCAN AXIS MOTOR BELT CARRIAGE CUTTER CARRIAGE PCA ENCODER STRIP INK TUBES AND TRAILING CABLE |
| CR357-67073 |
PREVENTIVE MAINTENANCE KIT #2 - INCLUDES SERVICE STATION AND LINE SENSOR |
| CR357-67074 |
STACKER PINCH ASSEMBLY |
| CR357-67075 |
T2500 / T3500 SERIAL LABEL SV |
| CR357-67076 |
SUPPORT LABEL T1500PS NAMEPLATE |
| CR357-67077 |
SUPPORT LABEL T1500PS NAMEPLATE - FOR US GOVERNMENT USE ONLY |
| CR357-67078 |
STACK PAD - WHERE THE STACK ARM REST ON |
| CR357-67080 |
T920/TX500 MICROSWITCH |
| CR357-67081 |
HP CARRIAGE PCA BOARD DESIGNED FOR HP DESIGNJET PRINTERS SPECIFICALLY FOR MODELS INCLUDING THE T920 T930 T1500 T2500 T2600 T3500 AND T940. IT ACTS AS A CRUCIAL ELECTRICAL COMPONENT THAT CONTROLS THE PRINTHEAD CARRIAGE MOVEMENT |
| CR357-67082 |
STACKER ARMS ASSEMBLY - WITH SEPARATOR - FOR THE DESIGNJET T920, T1500,T2500 SERIES |
| CR357-67085 |
T920/T1500 SERIES DESIGNJET PLOTTER FORMATTER W/HDD FW SV MAIN FORMATTER BOARD FIT FOR HP DJ T920 T1500 T930 T1530 |
| CR357-67086 |
STARWHEEL LIFTER SUPPORT ASSEMBLY. STARWHEEL LIFTER SUPPORT ASSEMBLY. THIS IS A GENUINE INTERNAL COMPONENT FOR SEVERAL MODELS OF HP DESIGNJET LARGE-FORMAT PRINTERS (PLOTTERS). |
| CR357-67087 |
CRYPTO ASIC SIM CHIP PCA ASSEMBLY - MOUNTS ON THE ENGIEN PCA - FOR THE T920, T1500, T2500 SERIES |
| CR357-67091 |
MERCURY LINEAR ENCODER SV. 36-INCH LINEAR ENCODER STRIP ASSEMBLY DESIGNED FOR HP DESIGNJET T920 T1500 T2500 AND T3500 SERIES PRINTERS AS WELL AS T930 T1530 T2530 T1600 AND T2600 MODELS. |
| CR357-67092 |
CARRIAGE ASSEMBLY DESIGNED FOR VARIOUS HP DESIGNJET LARGE-FORMAT PLOTTERS. IT SERVES AS THE MOBILE COMPONENT THAT HOLDS THE PRINTHEADS AND MOVES ACROSS THE PRINTER DURING THE PRINTING PROCESS. CARRIAGE ASSEMBLY DESIGNJET T920 T930 T1500 T2500 T2530 T3500 AND SIMILAR UNITS. |
| CR357-67093 |
36-INCH SPINDLE ASSEMBLY - FOR THE T920, T1500, T2500 SEREIS |
| CR357-67094 |
T9X0/TX500 STAND ASSEMBLY. BASKET OUTPUT TRAY ASSEMBLY (UPDATED TO INCLUDE T9X0/TX500 STAND) WHERE PAPER REST AFTER IT HAS BEEN PRINTED |
| CR357-67095 |
HARD DRIVE - WITH FIRMWARE MODELS DESIGNJET T920 / T1500 / T2500 SERIES. |
| CR357-67098 |
SECOUND STARWHEEL RAIL - FOR THE T930, T1530, T2530 SERIES |
| CR357-67099 |
E-BOX FAN ASSEMBLY - FOR THE T930, T1530, T2530 SERIES |
| CR359-67001 |
T2500 FORMATTER POWER W/ RISER |
| CR359-67006 |
STACKER ADAPTOR |
| CR359-67007 |
SCANNER BUMPER BRACKET ASSEMBLY |
| CR359-67008 |
SCANNER DEFLECTORS |
| CR359-67009 |
SCANNER LIFT ASSEMBLY |
| CR359-67010 |
SCANNER FRONT BEAM BUMPER ASSEMBLY |
| CR359-67011 |
SCANNER LATCH HOOK PUSH ASSEMBLY |
| CR359-67012 |
CONTACT IMAGE SENSOR (CIS) LATCH |
| CR359-67014 |
CONTACT IMAGE SENSOR (CIS) TILES KIT |
| CR359-67015 |
SET-SCANNER FFC CABLE |
| CR359-67016 |
STEPPER MOTOR ASSEMBLY - INCLUD TACHO SENSOR ASSEMBLY |
| CR359-67017 |
PRESSURE ROLLERS HP PRESSURE ROLLER FOR THE SCANNER ASSEMBLY - DESIGNJET T2500 / T3500 SERIES |
| CR359-67018 |
PAPER MEDIA LID SENSOR |
| CR359-67019 |
TORSIONER DAMPER ASSEMBLY - FOR CONTACT IMAGE SENSOR (CIS) BRIDGE |
| CR359-67020 |
GLASS PLATE ASSEMBLY |
| CR359-67021 |
SCANNER USB AND POWER/RESET/AWAKE CABLE |
| CR359-67023 |
SCANNER CONTROLLER PC BOARD |
| CR359-67024 |
ONE CIS MODULE PC / CONTACT IMAGE SENSOR (CIS) MODULE MERCURY CIS MODULE SV. UNIT USE 5 UNIT SCANNER (CR359-67033). |
| CR359-67032 |
T2500 / T3500 SERIAL LABEL SV |
| CR359-67033 |
T2500/T3500 CIS MODULE 5UNIT SCANNER UNIT CIS HP DESIGNJET PLOTTERS. TO ORDER ONE CIS SEE (CR358-60075). |
| CR359-67034 |
MCY FORMATTER POWER SVC FORMATTER W/ HDD |
| CR647-67001 |
INTERCONNECT CABLES KIT - FOR USE WITH 24-INCH PLOTTERS |
| CR647-67002 |
T790 WINDOW 24 SV |
| CR647-67003 |
T790 TOP COVER 24 SV |
| CR647-67004 |
TUBES SYSTEM 24 SV |
| CR647-67005 |
SUPPORT LABEL T790 NAMEPLATE SV |
| CR647-67006 |
T790 UPPER RIGHT SUPPORT SV UPPER RIGHT ROLL SUPPORT HP T770 T790 795 T1200 T1300 AND SIMILAR MODELS. |
| CR647-67007 |
MSG SATA HDD W/FW SV HARD DRIVE WITH FIRMWARE INTERNAL HARD DISK DRIVE SPECIFICALLY DESIGNED FOR USE IN HP DESIGNJET T790 T795 AND T1300 LARGE-FORMAT PRINTERS. |
| CR647-67008 |
MSG FORMATTER WITH HDD T790/T1300 FORMATTER W/ HDD SV |
| CR647-67010 |
POWER SUPPLY UNIT 110V (PSU) 170W ONLY - FOR THE DESIGNJET T1200/T770 PRINTER SERIES. FOR MAIN PCA AND PSU (ORDER CH538-67009). |
| CR647-67011 |
ENGINE PCA W/PSU SV ENGINE PCA W/PSU SV FOR HEWLETT PACKARD DESIGNJET T SERIES. |
| CR647-67013 |
TUBES SYSTEM 24 SV WITH HITACH |
| CR647-67014 |
T770 / T790 24IN PM KIT SV WITH HITACHI TC. |
| CR647-67015 |
INK SUPPLY TUBES WITH HITACHI TC 24INCH PLOTTER. |
| CR647-67016 |
MSG SATA HDD W/ FW IG-01-07-02.1 SV |
| CR647-67017 |
T1120/620 24IN PM SV KIT W/ MOD TC |
| CR647-67018 |
MSG SATA HDD W/FW SV HARD DRIVE WITH FIRMWARE INTERNAL HARD DISK DRIVE SPECIFICALLY DESIGNED FOR USE IN HP DESIGNJET T790 T795 AND T1300 LARGE-FORMAT PRINTERS. |
| CR647-67019 |
FORMATTER W HDD FW T790/T1300 FORMATTER W/ HDD SV |
| CR647-67021 |
MSG SATA HDD W/FW SV HARD DRIVE WITH FIRMWARE INTERNAL HARD DISK DRIVE SPECIFICALLY DESIGNED FOR USE IN HP DESIGNJET T790 T795 AND T1300 LARGE-FORMAT PRINTERS. |
| CR647-67022 |
MSG FORMATTER W/HDD FW T790/T1300 FORMATTER W/ HDD SV |
| CR647-67023 |
MSG SIGNED ANALOG ENCODER PC BOARD (FOR CALIBRATION AND ALIGNMENT LINE SENSOR ORDER Q6683-67004) |
| CR647-67024 |
LINE SENSOR SERVICE |
| CR647-67025 |
CARRIAGE WITH CUTTER ASSEMBLY - FOR THE DESIGNJET T770/T790/T1200/T1300/T2300 PRINTER SERIES |
| CR647-67026 |
T790/T1300 FORMATTER W/ HDD T790/T1300 FORMATTER W/ HDD SV |
| CR647-67027 |
T790/T1300 FORMATTER W/ HDD SV |
| CR647-67028 |
SATA HDD W/FW SV MSG SATA HDD W/FW SV HARD DRIVE WITH FIRMWARE . |
| CR647-67029 |
T790/T1300/ Z5400 FORMATTER W/ HDD FOR HP DESIGNJET PLOTTER UNITS. |
| CR647-67030 |
T790/T795T1300 SATA HDD W/FW HARD DRIVE UNIT. 2.5-INCH SATA INTERNAL HARD DISK DRIVE SPECIFICALLY DESIGNED FOR USE IN HP DESIGNJET T790 T795 AND T1300 LARGE-FORMAT PRINTERS. |
| CR647-67031 |
ENGINE CABLES 24IN SV |
| CR647A |
HP DESIGNJET T790 24-IN EPRINTER |
| CR648-67001 |
SUPPORT LABEL T790PS NAMEPLATE SV |
| CR648A |
HP DESIGNJET T790 24-IN POSTSCRIPT EPRINTER |
| CR649-67001 |
T790 WINDOW 44 SV |
| CR649-67002 |
T790 TOP COVER 44 SV |
| CR649-67003 |
PREVENTIVE MAINTENANCE KIT 1 - INCLUDES THE CARRIAGE WITH CUTTER ASSEMBLY SCAN-AXIS MOTOR TUBE SYSTEM WITH TRAILING CABLE AND BELT - FOR THE 44-INCH DESIGNJET T SERIES PRINTERS. |
| CR649-67004 |
INK SUPPLY TUBES - INCLUDES TRAILING CABLE - FOR USE WITH DESIGNJET PRINTERS INK SUPPLY TUBES - INCLUDES TRAILING CABLE - FOR USE WITH DESIGNJET PRINTERS. (PLEASE ORDER KIT CR649-67003). |
| CR649-67005 |
T1120/620 44INCH PM KIT W/MOD TC PREVENTIVE MAINTENANCE KIT #1 |
| CR649-67006 |
TUBE SYSTEM - INCLUDES THE TRAILING CABLE AND FERRITE PARTS - TUBE SYSTEM 44 ASSY SV W/ MOD TC PLOTTERS |
| CR649A |
HP DESIGNJET T790 44-IN EPRINTER |
| CR650-67001 |
MSG SATA HDD W/FW SV HARD DRIVE WITH FIRMWARE INTERNAL HARD DISK DRIVE SPECIFICALLY DESIGNED FOR USE IN HP DESIGNJET T790 T795 AND T1300 LARGE-FORMAT PRINTERS. |
| CR650A |
HP DESIGNJET T790 44-IN POSTSCRIPT EPRINTER |
| CR651-67001 |
T1300 TOP COVER SV |
| CR651-67002 |
T1300 WINDOW 44 SV |
| CR651-67003 |
SUPPORT LABEL T1300 NAMEPLATE SV |
| CR651-67004 |
POWER SUPPLY SV 170W FOR THE DESIGNJET T790 T1300 T1200 T770 AND Z-SERIES PLOTTER PARTS. FOR MAIN PCA AND PSU (ORDER CH538-67009). |
| CR651-67005 |
FORMATTER BOARD ONLY - (WILL NOT INCLUDE THE HARD DISK DRIVE CK837-67035) - FOR THE HEWLETT PACKARD DESIGNJET T2300/T790/T1300 FORMATTER SV SERIES FORMATTER BOARD - (FORMATTER WITH HARD DISK DRIVE/ WITH CURRENT FIRMWARE ORDER CR647-67027). |
| CR651-67006 |
ENGINE PCA W/PSU SV ENGINE PCA W/PSU SV FOR HEWLETT PACKARD DESIGNJET T SERIES. |
| CR651-67007 |
UPPER RIGHT ROLL COVER SUPPORT (CARBONITE BLACK) - LOCATED ON THE UPPER RIGHT SIDE OF THE DESIGNJET |
| CR651A |
HP DESIGNJET T1300 44-IN EPRINTER |
| CR652-67001 |
SUPPORT LABEL T1300PS NAMEPLATE SV |
| CR652A |
HP DESIGNJET T1300 44-IN POSTSCRIPT EPRINTER |
| CR667A |
HP PREMIUM PLUS SOFT-GLOSS PHOTO PAPER-50 LETTER/8.5 X 11 IN |
| CR7612-07610 |
HP ADF SCANNER COVER HINGE UNIT (X1 PER ORDER) FOR HP OFFICEJET WIDE FORMAT G1X85A 7612 CR7610A 7610 AND SIMILAR HP MODELS. |
| CR769-66001 |
HP WIDEFORMAT ORIGINAL CARRIAGE FOR HP 7610 6100E 6700 OFFICEJET 7612 6600 7110 6060E 6100 WIDE FORMAT. |
| CR774-67002 |
GUTTER PLATTEN SERV / INK COLLECTOR REV2 |
| CR774-67003 |
INK COLLECTOR FOAM SETS REV2 |
| CR774-67005 |
DUAL ROLL GEAR REV2 |
| CR774-67017 |
OFFICEABILITY SIDE RIGHT DOOR KIT |
| CR774-67019 |
HDD FOR LX850 AND COMPATIBLE PROD |
| CR774-67021 |
MEDIA EDGE HOLDERS KIT REV3 |
| CR774-67031 |
CARRIAGE OILING FOAMS KIT - KIT OF TWO OILY FOAMS CARRIAGE OILING FOAMS KIT - KIT OF TWO OILY FOAMS. |
| CZ126S |
711 12-ML INTRO CYAN INK CARTRIDGE HP DESIGNJET T SERIES PLOTTER. |
| CZ127S |
711 12-ML INTRO MAGENTA INK CARTRIDGE HP DESIGNJET T SERIES PLOTTER. |
| CZ128S |
711 12-ML INTRO YELLOW INK CARTRIDGE HP DESIGNJET T SERIES PLOTTER. |
| CZ129A |
711 38-ML BLACK INK CARTRIDGE DESIGNJET T SERIES PLOTTER. |
| CZ130A |
711 29-ML CYAN INK CARTRIDGE |
