| Part |
Picture |
Description |
| CQ871-67043 |
DRYER MODULE - EVAPORATES MOST OF THE WATER CONTENT OF THE INK TO PROVIDE THE CORRECT TEMPERATURE FOR SATISFACTORY PRINT QUALITY |
| CQ871-67044 |
TRAILING CABLE - TRANSFERS THE PROCESSED ENCODER SIGNAL TO THE ENGINE PCA (SRK AND TC 104 SERV) |
| CQ871-67045 |
INK WASTE MANAGEMENT - FOR USE WITH DESIGNJET PRINTERS |
| CQ871-67046 |
RIGHT SIDE CONNECTOR COVER |
| CQ871-67047 |
ENTRY ROLLER - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67048 |
LEFT SIDE TAKE-UP REEL (TUR) MODULE |
| CQ871-67049 |
LOADING ACCESSORY - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67050 |
TAKE-UP REEL (TUR) TENSION BAR |
| CQ871-67051 |
DRYER PROTECTOR - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67052 |
DRYER PLASTIC ISOLATORS - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67053 |
MEDIA LEVER SENSOR |
| CQ871-67054 |
CONTROL PANEL ASSEMBLY - FOR USE WITH THE 104-INCH DESIGNJET L28500 PRINTER |
| CQ871-67055 |
PRIMER VALVE - INCLUDES THE TUBES ASSEMBLY |
| CQ871-67056 |
SOL (SPECTROPHOTOMETER) ACTUATOR ASSEMBLY - USED TO OPEN THE SHUTTER |
| CQ871-67057 |
PINCHWHEEL LEVER ASSEMBLY |
| CQ871-67058 |
MEDIA MOTOR - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67059 |
DRIVE ROLLER - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67060 |
VACUUM EXTRA ASSEMBLY - INCLUDES FRAME, TUBES, AND PIPES |
| CQ871-67061 |
VACCUM EXTRA MODULE - INCLUDES THE EOLA CONTROL BOARD |
| CQ871-67062 |
CURING RESISTOR HOLDERS |
| CQ871-67063 |
RIGHT SIDE COVER - DOES NOT INCLUDE DOOR |
| CQ871-67064 |
RIGHT SIDE DOOR - FOR USE WITH PLOTTERS |
| CQ871-67065 |
HARDWARE KIT - CONTAINS VARIOUS TOOLS AND SCREWS TO ASSEMBLE THE STAND ASSEMBLY - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67066 |
GEARS KIT - INCLUDES THE ROLLER BRAKE |
| CQ871-67067 |
OPTICAL MEDIA ADVANCE SENSOR (OMAS) CABLE |
| CQ871-67068 |
DRIVE ROLLER ENCODER - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67069 |
BACK COVER - FOR USE WITH THE 104-INCH DESIGNJET L28500 PRINTER |
| CQ871-67071 |
SCAN-AXIS MOTOR, SCAN AXIS MOTOR 104 SERV V2 - FOR USE WITH DESIGNJET PRINTERS. |
| CQ871-67072 |
MI PLATEN - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67073 |
MI PROFILE AND MYLAR - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67074 |
EXTRA POWER SUPPLY UNIT (PSU) - OUTPUT VOLTAGE 24VAC - THERE IS ONLY ONE LED IN THE EXTRA PSU (THIS LED INDICATES THAT THE OUTPUT 24 V VOLTAGE IS BEING DELIVERED AND IT IS OPERATING NORMALLY) |
| CQ871-67077 |
SCREW SET - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67078 |
REAR AND FRONT TUBE SHELF - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67079 |
GROUNDING CABLES KIT - INCLUDES THE INK SUPPLY STATION (ISS) GROUNDING CABLE, ARC SAFETY GROUND CABLE, AND THE DRYING SAFETY GROUND CABLE |
| CQ871-67080 |
ISS-SIDE CABLES KIT - INCLUDES COVER SWITCH EXTENSION, CONVERTERS O/P POWER DRYING/CURING, VAPOR/CURING FANS, IR SNS COOLING FAN, SUBSTRATE CRASH, PM-DIFFERENTIAL PCA CABLE, ANALOG ENCODER, DRYING FANS, IR SENSORS, SCAN MOTOR FAN, PRINTMECH TO EOLA |
| CQ871-67081 |
CABLES - CONNECTED ON THE SERVICE STATION SIDE OF THE PRINTER |
| CQ871-67082 |
INK SERVICE STATION (ISS) PRE-DRIVER PCA - FOR DESIGNJET PLOTTERS |
| CQ871-67084 |
RIGHT SIDE TRIM ASSEMBLY |
| CQ871-67085 |
CARRIAGE ASSEMBLY - DOES NOT INCLUDE THE CARRIAGE PCA, SOL SENSOR, OR THE LINE SENSOR |
| CQ871-67088 |
3-PHASE VOLTAGE CONFIG. KIT SERV |
| CQ871-67090 |
AIR PRESSURE SYSTEM (APS) ASSEMBLY - CONTAINS TWO AIR PUMPS WHICH ARE USED TO FORCE THE INK THROUGH THE TUBES TO THE CARRIAGE ASSEMBLY |
| CQ871-67092 |
MAINTENANCE KIT 1 - INCLUDES THE SCAN-AXIS MOTOR, ENCODER STRIP AND SENSOR, INK TUBES ASSEMBLY AND TRAILING CABLE, BELT AND TENSION KIT ASSEMBLY, CARRIAGE ASSEMBLY (WITHOUT PCA, CUTTER, COLOR SENSOR), LINE SENSOR, CARRIAGE PCA COVER, AND PAPER JAM SENSOR |
| CQ871-67093 |
MAINTENANCE KIT 2 - INCLUDES THE SERVICE STATION, LINE SENSOR, PAPER JAM SENSOR, INK MAINTENANCE KIT, AND LUBRICATION FELTS - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67094 |
MAINTENANCE KIT 3 - INCLUDES THE DROP DETECTOR, INK FUNNEL, ROLLER TRANSMISSION, INK MAINTENANCE KIT, LUBRICATION FELTS, AND LINE SENSOR - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67096 |
TUBE CLIPS - FOR USE WITH 104-INCH PLOTTERS |
| CQ871-67101 |
METAL CAM ARM SERV |
| CQ871-67103 |
AIR TUBE AND FITTINGS SERV |
| CQ871-67104 |
SRK AND TC 104 SERV VERSION 2 |
| CQ871-67105 |
SCAN AXIS MOTOR 104 SERV V2 |
| CQ871-67116 |
HP ENCODER SVS KIT BOOMER |
| CQ871-67117 |
NEW SMK1 104 SERV |
| CQ890-60088 |
BELT PULLEY TENSIONER FOR HP DESIGNJET PRINTERS. IT IS A CRITICAL MAINTENANCE COMPONENT THAT ENSURES THE CARRIAGE BELT REMAINS AT THE CORRECT TENSION FOR PRECISE PRINTING AND SMOOTH CARRIAGE MOVEMENT. FITS FOR HP DESIGNJET T830 T530 T120 T730 T520 AND SIMILAR UNITS. |
| CQ890-60239 |
AMPXL 24 CARRIAGE ASSEMBLY W/B AND LUBE. (FOR 36INCH UNITS ORDER CQ893-67011). |
| CQ890-60244 |
KIT FRICTION KIT FRICTION REPAIR GREASE. |
| CQ890-67001 |
CARRIAGE LINE SENSOR ASSEMBLY KIT - INCLUDES T-6 SCREWDRIVER. CARRIAGE LINE SENSOR (ALSO KNOWN AS A ZIM SENSOR) DESIGNED FOR VARIOUS HP DESIGNJET T-SERIES LARGE-FORMAT PRINTERS. IT MONITORS THE PRINTHEAD OR CARRIAGE POSITION TO ENSURE ACCURATE PRINTING CORRECT ALIGNMENT AND RELIABLE OPERATION. |
| CQ890-67002 |
CARRIAGE ASSEMBLY ONLY - FOR THE DESIGNJET T120 T520 T730 T830 24INCH / 36INCH MODELS. |
| CQ890-67003 |
24-INCH ENCODER STRIP BELT. AMPXL 24 ENCODER STRIP SV-REIN |
| CQ890-67004 |
36 ENCODER STRIP ENCODER STRIP COMPATIBLE WITH HP DESIGNJET T120 T520 120 520 36INCH SIMILAR MODELS. |
| CQ890-67005 |
24-INCH TRAILING CABLE |
| CQ890-67006 |
HP CARRIAGE MOTOR (SCAN-AXIS MOTOR) DESIGNED FOR HP DESIGNJET T120 T130 T520 T530 T650 T730 AND T830 SERIES LARGE-FORMAT PRINTERS |
| CQ890-67007 |
MULTI-SHEET ACCESSORY PAPER TRAY ASSEMBLY FOR HP DESIGNJET T100 / T130/ T730/ T520/ T120/ T830 MULTI-SHEET ACCESSORY PAPER TRAY ASSEMBLY AND COMPATIBLE PLOTTER MODELS. |
| CQ890-67008 |
36 CENTRAL WINDOW |
| CQ890-67009 |
24 T520 CENTRAL WINDOW |
| CQ890-67010 |
24-INCH BACK COVER - PLASTIC RECTANGULAR SHAPE COVER - PROTECTS THE BACK SIDE OF THE DESIGNJET |
| CQ890-67011 |
CUTTER ASSEMBLY - INCLUDES CUTTER BODY CUTTER EXTRUSION LEAD COVER CUTTER BRIDGE AND INSTRUCTION FLIER CASE RIGHT COVER - PLASTIC COVER THAT PROTECTS THE RIGHT END SIDE OF THE DESIGNJET |
| CQ890-67012 |
CASE LEFT COVER - PLASTIC COVER THAT PROTECTS THE LEFT END SIDE OF THE DESIGNJET |
| CQ890-67013 |
24-INCH ROLL COVER - TRANSPARENT PLASTIC COVER THAT PROTECTS THE ROLL |
| CQ890-67014 |
24-INCH CENTRAL COVER - INCLUDES TOP COVER AND TOP COVER SENSOR |
| CQ890-67017 |
CUTTER ASSEMBLY - INCLUDES CUTTER BODY, CUTTER EXTRUSION LEAD COVER AND CUTTER BRIDGE. |
| CQ890-67018 |
OUTPUT PLATEN CUTTER CSR LID 24P. DESIGNJET T120 24/T520/T730/T830 AND SIMILAR UNITS. |
| CQ890-67019 |
PULL OUT PAPER TRAY - OUT PUT PAPER TRAY EXTENSION |
| CQ890-67020 |
FEED INDEX ENCODER SENSOR PCA - INCLUDES ENCODER PCA, INDEX PLUS CABLE, OUTPUT TRAY SENSOR PLUS CABLE, AND TOP COVER SENSOR |
| CQ890-67021 |
CABLES SERVICE ASSEMBLY - INCLUDES ENCODER REWIND FFC, INK DOOR FFC, PICK MOTOR ENCODER FFC, CONTROL PANEL FFC, POWER BUTTON FFC, PAPER FEED SENSORS FFC, AND BUNDLE-24 ASSEMBLY FFC |
| CQ890-67022 |
INTERCONNECT PC BOARD DESIGNJET PLOTTER T520 / T120 SERIES. |
| CQ890-67023 |
MAIN LOGIC PC BOARD - INCLUDES THE PC BOARD HP DESIGNJET T520 24 INCH EPRINTER / 24IN HP DESIGNJE T520 MAIN BOARD W/DOOR SENSOR. |
| CQ890-67025 |
POWER SUPPLY ASSEMBLY FOR HEWLETT PACKARD UNIT. THIS PSU KIT IS COMPATIBLE WITH A WIDE RANGE OF HP DESIGNJET AND STUDIO SERIES LARGE-FORMAT PRINTERS. |
| CQ890-67026 |
CONTROL PANEL ASSEMBLY - INCLUDES FRONT PANEL PCA POWER BUTTON CABLE AND RIBBON CABLE INCORPORATED AND ASSEMBLED. HP DESIGNJET 500 T1100 T770 T790 Z2100 T520 T920 AND SIMILAR UNITS. |
| CQ890-67028 |
INK CARTRIDGE DOOR COVER SENSOR |
| CQ890-67030 |
AMPXL PRIME PUMP ASSY SV. HP CANDELA PRIME PUMP SV KIT (ALSO KNOWN AS THE T830 AIR PUMP) AN INTERNAL COMPONENT FOR HP DESIGNJET LARGE FORMAT PRINTERS. |
| CQ890-67031 |
24 UPPER ROLL MEDIA GUIDE |
| CQ890-67032 |
OUT-OF-PAPER SENSOR - AMPXL OOPS SENSOR FLAG W/TAPE SV |
| CQ890-67033 |
ENCODER DISK ENCODER DISK FOR THE HP DESIGNJET T120 T130 T520 T530 T830 T650 T630 SERIES |
| CQ890-67034 |
24-INCH STARWHEEL ASSEMBLY - INCLUDES THE OUTPUT SHAFT;PART CQ890-67034 IS NO LONGER SUPPLIED. PLEASE ORDER THE REPLACEMENT, CQ890-67075 |
| CQ890-67036 |
AMPXL PAPER MOTOR SV PAPER-AXIS MOTOR ASSEMBLY COMPATIBLEHP T120 T520 T730 T830 T125 T530 |
| CQ890-67037 |
36-INCH LEFT ROLL SUPPORT WITH REWINDER AND COVER |
| CQ890-67038 |
RIGHT ROLL SUPPORT WITH COVER AND DAMPERS |
| CQ890-67041 |
RIGHT GEAR TRAIN ASSEMLBY;PART CQ890-67041 IS NO LONGER SUPPLIED. PLEASE ORDER THE REPLACEMENT, CQ890-67077 |
| CQ890-67043 |
24-INCH SPINDLE MODULE ASSEMBLY SPINDLE FOR THE HP DESIGNJET T210 T230 T650 STUDIO STEEL AND SPARK 24-IN SERIES |
| CQ890-67044 |
LEFT SIDE SPITTOON ASSEMBLY FOR VARIOUS HP DESIGNJET T-SERIES PRINTERS. |
| CQ890-67045 |
SERVICE STATION ASSEMBLY DESIGNED FOR SEVERAL HP DESIGNJET PLOTTER SERIES. IT IS A CRITICAL INTERNAL COMPONENT RESPONSIBLE FOR MAINTAINING THE HEALTH OF THE PRINTER'S PRINTHEAD DESIGNJET T100 SERIES T200 SERIES T500 SERIES T600 SERIES AND OTHER SIMILAR MODELS. |
| CQ890-67046 |
AMPXL INK DOOR COVER TEXTURED |
| CQ890-67047 |
MULTI-SHEET PAPER TRAY EXTENSION - LOCATED ON THE THE ACCESSORY TRAY (DENOTED AS IMAGE 5). MULTI-SHEET PAPER TRAY EXTENSION FOR THE HP DESIGNJET T730 T830 T525 T520 T120 AND OTHER T SERIES |
| CQ890-67050 |
24-INCH FRONT COVER ASSEMBLY - PLASTIC COVER THAT PROTECTS THE FRONT SIDE OF THE DESIGNJET |
| CQ890-67051 |
24-INCH LEFT ROLL SUPPORT WITH REWINDER AND COVER |
| CQ890-67052 |
24-INCH STAND ASSEMBLY FULL STAND 24 INCH STAND FOR THE 24IN HP DESIGNJET T730 T100 T120 T125 T130 T520 T525 T530 T830 SERIES |
| CQ890-67053 |
36 STAND ASSY SERVICE ASSY STAND AXL 36IN. PLEASE ORDER HARDWARE KIT. DOES NOT INCLUDE (DENOTE#2 CQ890-67054 HARDWARE KIT) |
| CQ890-67054 |
STAND HARDWARE TOOL KIT - INCLUDES ALL SCREWS AND TOOLS TO REPAIR AND MOUNT THE STAND |
| CQ890-67057 |
LABELS KIT - INCLUDES INK SUPPLY LABEL, SERIAL LABEL, NAMEPLATES, AND INK SUPPLY LABELS |
| CQ890-67059 |
AMPXL 24 BELT SV HP DESIGNJET T120 T520 CARRIAGE BELT 24 INCH A1. HP DESIGNJET T120 T520 T830 T125 T130 T530 T525 AND SIMILAR UNITS. |
| CQ890-67060 |
PINCH WHEELS ASSEMBLY |
| CQ890-67065 |
AMPXL 24 ENCODER STRIP SV-REIN 24'' ENCODER STRIP FIT HP DESIGNJET T120 T520 T125 T130 T525 T830 AND SIMILAR MODELS. |
| CQ890-67073 |
CASE RIGHT |
| CQ890-67075 |
24 STARWHEEL ASSY AND OUTPUT SHAFT |
| CQ890-67076 |
AMPXL OOPS SENSOR FLAG W/TAPE SV. OOPS SENSOR FLAG W/TAPE-BIG LO. OUT OF PAPER SENSOR (ALSO KNOWN AS AN OOPS SENSOR FLAG) DESIGNED FOR HP DESIGNJET WIDE-FORMAT PRINTERS. |
| CQ890-67077 |
RIGHT GEAR TRAIN ASSEMLBY |
| CQ890-67081 |
AMP XL PRO MAIN PCA SV NEW ID. MAIN LOGIC PC BOARD - INCLUDES THE PC BOARD HP DESIGNJET T520 24 INCH EPRINTER / HP DESIGNJET T520 MAIN BOARD W/DOOR SENSOR (FOR 36INCH ORDER CQ893-67032). |
| CQ890-67082 |
AMPXL CONTROL PANEL TEXT_AND_GLOSS SV. HP CONTROL PANEL ASSEMBLY WITH A CABLE DESIGNED FOR HP DESIGNJET T120 T520 T125 T130 T525 T530 T730 AND T830 24-INCH AND 36-INCH PLOTTERS. |
| CQ890-67083 |
AMPXL 24P CENTRAL COVER TEXTURED |
| CQ890-67084 |
AMPXL LEFT COVER TEXTURED SV |
| CQ890-67085 |
CUTTER ASSEMBLY - INCLUDES CUTTER BODY CUTTER EXTRUSION LEAD COVER CUTTER BRIDGE AND INSTRUCTION FLIER RIGHT COVER ASSEMBLY - PLASTIC COVER THAT PROTECTS THE RIGHT SIDE OF THE PRINTER |
| CQ890-67086 |
AMPXL INK DOOR COVER TEXTURED |
