| Part |
Picture |
Description |
| C7770-60015 |
PINCHARM LIFT MECHANISM - INCLUDES CAM (A LONG BAR) , CAM BUSHINGS, PINCH ARM LEVER, PINCH ARM LEVER BUSHING |
| C7770-60017 |
CUTTER GUIDE - GUIDE BAR FOR THE CUTTER ASSEMBLY - FOR 42-INCH PLOTTERS |
| C7770-60018 |
HARDWARE KIT FOR PRINTER STAND - INCLUDES SCREWDRIVER AND SCREWS |
| C7770-60020 |
MEDIA BIN (USUALLY GRAPHITE GRAY, BUT COLOR MAY VARY) - PLASTIC TRAY THAT MOUNTS TO THE PLOTTER. STAND ASSEMBLY - FOR USE WITH 42-INCH PLOTTERS |
| C7770-60021 |
LEG ASSEMBLY, ONLY ONE INCLUDED, NOT BOTH AS SHOWN - SIDE SUPPORT FOR THE PRINTER - DOES NOT INCLUDE THE FOOT ASSEMBLY |
| C7770-60022 |
FOOT ASSEMBLY (INCLUDES CASTERS) - MOUNTS TO THE BOTTOM OF THE LEFT AND RIGHT PRINTER STAND LEGS, PRICE IS FOR ONE PC. (PRICE IS FOR X1PC). PLOTTER REQUIRES (TWO USED). |
| C7770-60023 |
MEDIA BIN (USUALLY GRAPHITE GRAY, BUT COLOR MAY VARY) - PLASTIC TRAY THAT MOUNTS TO THE PLOTTER. STAND ASSEMBLY - FOR USE WITH 42-INCH PLOTTERS |
| C7770-60031 |
MEDIA BIN (USUALLY GRAPHITE GRAY, BUT COLOR MAY VARY) - PLASTIC TRAY THAT MOUNTS TO THE PLOTTER. STAND ASSEMBLY - FOR USE WITH 42-INCH PLOTTERS |
| C7770-60147 |
CARRIAGE ASSEMBLY TRAILING CABLE KIT - INCLUDES INSTALLATION INSTRUCTIONS, TRAILING CABLES, MOUNTING CLIPS, AND A FERRITE - CABLES HAVE 30-PIN (M) EDGE CONNECTORS - 2.0M (6.5FT) LONG - FOR 42-INCH MODELS |
| C7770-60148 |
MEDIA BIN (FLINT GRAY) - PLASTIC TRAY THAT MOUNTS TO THE PRINTER STAND LEGS - FOR 42-INCH PLOTTERS |
| C7770-60153 |
INK TUBES ASSEMBLY - INCLUDES FOUR INK TUBES, COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS (CARRIAGE CRANE AND INK SUPPLY STATION CRANE), AND FOUR SETUP PENS - FOR USE WITH THE 42-INCH DESIGNJET 500/800 PRINTER SERIES |
| C7770-60154 |
TOP COVER ASSEMBLY (GRAY) - FOR THE 42-INCH DESIGNJET 500 PRINTER SERIES |
| C7770-60155 |
BACK PLATEN 42 INCH (SVC) - RCBACK PLATEN ASSEMBLY - CURVED COVER/GUIDE THAT IS INSTALLED BELOW THE PAPER DRIVE ROLLER - FOR USE WITH 42-INCH PLOTTERS
|
| C7770-60157 |
PAPER DRIVE ROLLER KIT - INCLUDES ROLLER ASSEMBLY, BUSHINGS, GEAR ON ROLLER, TRANSMISSION GEAR KIT, ENCODER DISC, END THRUST (AXIAL) SPRING, LINT FREE CLOTH, RUBBER GLOVE, AND INSTRUCTION SHEETS - FOR USE WITH 42-INCH PLOTTERS |
| C7770-60251 |
INK TUBES ASSEMBLY - INCLUDES FOUR INK TUBES, COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS (CARRIAGE CRANE AND INK SUPPLY STATION CRANE), AND FOUR SETUP PENS - FOR USE WITH THE 42-INCH DESIGNJET 500/800 PRINTER SERIES |
| C7770-60258 |
CARRIAGE ASSEMBLY TRAILING CABLE KIT - INCLUDES INSTALLATION INSTRUCTIONS, TRAILING CABLES, MOUNTING CLIPS, AND A FERRITE - CABLES HAVE 30-PIN (M) EDGE CONNECTORS - 2.0M (6.5FT) LONG - FOR 42-INCH MODELS |
| C7770-60260 |
PAPER DRIVE ROLLER KIT - INCLUDES ROLLER ASSEMBLY, BUSHINGS, GEAR ON ROLLER, TRANSMISSION GEAR KIT, ENCODER DISC, END THRUST (AXIAL) SPRING, LINT FREE CLOTH, RUBBER GLOVE, AND INSTRUCTION SHEETS - FOR 42-INCH MODEL |
| C7770-60267 |
RIBBON CABLE KIT - INCLUDES INSTALLATION INSTRUCTIONS AND RIBBON CABLE WITH FERRITE - CABLE HAS 40 PIN (F) CONNECTORS - 2.0M (6.5FT) LONG |
| C7770-60273 |
BAIL ASSEMBLY - MOUNTING STRIP ASSEMBLY FOR THE STARWHEEL MOUNT ASSEMBLIES (NOT INCLUDED) - EXTENDS WIDTH OF PLOTTER (D-SIZE) |
| C7770-60274 |
CARRIAGE ASSEMBLY TRAILING CABLE KIT - INCLUDES INSTALLATION INSTRUCTIONS, TRAILING CABLES, MOUNTING CLIPS, AND A FERRITE - CABLES HAVE 30-PIN (M) EDGE CONNECTORS - 2.0M (6.5FT) LONG - FOR 42-INCH MODELS |
| C7770-60276 |
DESIGNJET 500/800 42 INCH MODEL PREVENTIVE MAINTENANCE KIT - INCLUDES IDLER PULLEY, SPRING TENSIONER, CARRIAGE BASE, SERVICE STATION, CUTTER ASSEMBLY, SETUP PEN ASSEMBLY, 42 INCH BELT, ENCODER STRIP, TRAILING CABLE AND RIDS ASSEMBLY (OEM LIMITED SUPPLY) |
| C7770-60283 |
TUBE GUIDE - BLACK PLASTIC GUIDE THAT INK TUBE SYSTEM SITS IN - FOR 42 INCH MODEL |
| C7770-60286 |
INK TUBES ASSEMBLY - INCLUDES FOUR INK TUBES COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS (CARRIAGE CRANE AND INK SUPPLY STATION CRANE) AND FOUR SETUP PENS - FOR USE WITH THE 42-INCH DESIGNJET 500/800 PRINTER SERIES |
| C7770-60287 |
PREVENTIVE MAINTENANCE KIT - INCLUDES IDLER PULLEY, SPRING TENSIONER, CARRIAGE BASE, SERVICE STATION, CUTTER ASSEMBLY, SETUP PEN ASSEMBLY, BELT, ENCODER STRIP AND RIDS ASSEMBLY - FOR USE WITH THE 42-INCH DESIGNJET 500/800 PLOTTERS |
| C7770-60289 |
PAPER DRIVE ROLLER KIT - INCLUDES ROLLER ASSEMBLY, BUSHINGS, GEAR ON ROLLER, TRANSMISSION GEAR KIT, ENCODER DISC, END THRUST (AXIAL) SPRING, LINT FREE CLOTH, RUBBER GLOVE, AND INSTRUCTION SHEETS - FOR USE WITH 42-INCH PLOTTERS |
| C7770-60290 |
TUBE GUIDE - BLACK PLASTIC GUIDE THAT INK TUBE SYSTEM SITS IN - FOR USE WITH 42-INCH PLOTTERS |
| C7770-60301 |
TOP COVER + WINDOW 42 |
| C7770-60303 |
BACK PLATEN 42 INCH (SVC) - RCBACK PLATEN ASSEMBLY - CURVED COVER/GUIDE THAT IS INSTALLED BELOW THE PAPER DRIVE ROLLER - FOR USE WITH 42-INCH PLOTTERS
|
| C7770-60307 |
TOP COVER + WINDOW (42 INCH) |
| C7770-60310 |
INK TUBE ASSEMBLY MONO (BLACK AND WHITE ONLY) - INCLUDES ONE INK TUBE COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS - FOR USE WITH THE 42-INCH DESIGNJET 500 SERIES |
| C7770-60311 |
PREV MAINT KIT 42 MONO |
| C7770-60322 |
CUTTER GUIDE - GUIDE BAR FOR THE CUTTER ASSEMBLY - FOR 42-INCH PLOTTERS |
| C7770B |
HP DESIGNJET 500 42-IN ROLL PRINTER |
| C7770C |
HP DESIGNJET 500PS 42-IN ROLL PRINTER |
| C7770E |
HP DESIGNJET 500 MONO 42-IN ROLL PRINTER |
| C7770F |
HP DESIGNJET 500 PLUS 42-IN ROLL PRINTER |
| C7770G |
HP DESIGNJET 500PS PLUS 42-IN PRINTER |
| C7772A |
FORMATTER UPGRADE KIT - ADDS HP-GL/2 DESIGNJET 500 800 SERIES GL/2 CARD C7772A - PLUGS INTO AN EIO CARD SLOT. GL-2 AND RTL FORMATTER HP-GL/2 AND RTL FORMATTER PC BOARD |
| C7776-60002 |
FORMATTER UPGRADE KIT - ADDS HP-GL/2 DESIGNJET 500 800 SERIES GL/2 CARD C7772A - PLUGS INTO AN EIO CARD SLOT. GL-2 AND RTL FORMATTER HP-GL/2 AND RTL FORMATTER PC BOARD |
| C7779-60002 |
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2 AND FIRMWARE) |
| C7779-60040 |
SOFTWARE FOR DESIGNJET 750, DESIGNJET 755, DESIGNJET 2000, DESIGNJET 2500 |
| C7779-60041 |
ZEHRASTER SOFTWARE FOR UNIX - ALLOWS TIFF AND JPEG PRINTING ON DESIGNJET 700 SERIES, 1000 SERIES, AND CP SERIES (ENGLISH) |
| C7779-60042 |
SOFTWARE FOR DESIGNJET 750, DESIGNJET 755, DESIGNJET 2000, DESIGNJET 2500 |
| C7779-60043 |
SOFTWARE FOR DESIGNJET 750, DESIGNJET 755, DESIGNJET 2000, DESIGNJET 2500 |
| C7779-60044 |
SOFTWARE FOR DESIGNJET 750, DESIGNJET 755, DESIGNJET 2000, DESIGNJET 2500 |
| C7779-60045 |
SOFTWARE FOR DESIGNJET 750, DESIGNJET 755, DESIGNJET 2000, DESIGNJET 2500 |
| C7779-60046 |
SOFTWARE FOR DESIGNJET 750, DESIGNJET 755, DESIGNJET 2000, DESIGNJET 2500 |
| C7779-60047 |
SOFTWARE FOR DESIGNJET 750, DESIGNJET 755, DESIGNJET 2000, DESIGNJET 2500 |
| C7779-60144 |
ELECTRONICS MODULE DSJ 500 SERIES. CONTAINS MAIN LOGIC BOARD CONNECTORS FOR PLUG-IN CARDS CONNECTOR FOR PARALLEL INTERFACE CABLE CONNECTOR FOR USB CABLE AND COOLING FAN |
| C7779-60154 |
TOP COVER ASSEMBLY (BLACK) - FOR THE 24-INCH DESIGNJET 800 PRINTER SERIES |
| C7779-60158 |
LEFT END COVER AND EIO COVER (BLACK) |
| C7779-60159 |
RIGHT SIDE COVER (BLACK) - FOR THE DESIGNJET 800 PRINTER SERIES ONLY (PART APPROACHING END OF LIFE, PLEASE CONTACT HP FOR AVAILABILITY) |
| C7779-60253 |
LEFT END COVER AND EIO COVER (BLACK) |
| C7779-60254 |
FORMATTER PC BOARD EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2 AND FIRMWARE) |
| C7779-60262 |
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2) |
| C7779-60263 |
ELECTRONICS MODULE - CONTAINS MAIN LOGIC BOARD, CONNECTORS FOR PLUG-IN CARDS, CONNECTOR FOR PARALLEL INTERFACE CABLE, CONNECTOR FOR USB CABLE, AND COOLING FAN |
| C7779-60264 |
FORMATTER PC BOARD FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2 AND FIRMWARE) |
| C7779-60267 |
END COVER - LEFT SIDE OF PLOTTER END COVER - BLACK IN COLOR FOR USE ON MODEL 800 |
| C7779-60269 |
64MB SO-DIMM MEMORY 133MHZ CL3 MODULE HP DESIGNJET 500 / 800 144PIN PC100 MEMORY MODULE INSTALLS INTO THE FORMATTER EIO BOARD. |
| C7779-60270 |
128MB SO-DIMM MEMORY MODULE - CAN BE INSTALLED ONLY INTO THE FORMATTER BOARD. 128MB SDRAM 100MHZ CL2 |
| C7779-60272 |
FORMATTER PC BOARD EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2) |
| C7779-69144 |
ELECTRONICS MODULE DSJ 500 SERIES - CONTAINS MAIN LOGIC BOARD CONNECTORS FOR PLUG-IN CARDS CONNECTOR FOR PARALLEL INTERFACE CABLE CONNECTOR FOR USB CABLE AND COOLING FAN |
| C7779-69263 |
ELECTRONICS MODULE 500/800 SERIES - CONTAINS MAIN LOGIC BOARD CONNECTORS FOR PLUG-IN CARDS CONNECTOR FOR PARALLEL INTERFACE CABLE CONNECTOR FOR USB CABLE AND COOLING FAN |
| C7779-69264 |
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2) FORMATTER FITS FOR HP DESIGNJET PLOTTERS FIX ERROR: 05:10 |
| C7779-69272 |
FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 FORMATTER PC BOARD (INCLUDES C7779-60270 128MB SDRAM 100MHZ CL2 AND FIRMWARE) FORMATTER FITS FOR HP DESIGNJET PLOTTERS FIX ERROR: 05:10 |
| C7779B |
HP DESIGNJET 800 PRINTER (24 IN) |
| C7779C |
HP DESIGNJET 800PS PRINTER (24 IN) |
| C7780-60001 |
MEDIA BIN (USUALLY GRAPHITE GRAY, BUT COLOR MAY VARY) - PLASTIC TRAY THAT MOUNTS TO THE PLOTTER. STAND ASSEMBLY - FOR USE WITH 42-INCH PLOTTERS |
| C7780-60002 |
MEDIA BIN (USUALLY GRAPHITE GRAY, BUT COLOR MAY VARY) - PLASTIC TRAY THAT MOUNTS TO THE PLOTTER. STAND ASSEMBLY - FOR USE WITH 42-INCH PLOTTERS |
| C7780-60154 |
TOP COVER ASSEMBLY (BLACK) - FOR THE 42-INCH DESIGNJET 800 PRINTER SERIES |
| C7780B |
HP DESIGNJET 800 PRINTER (42 IN) |
| C7780C |
HP DESIGNJET 800PS PRINTER 42-IN |
| C7781-60004 |
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS - FOR 24-INCH PLOTTERS |
| C7781-60007 |
MEDIA BIN (FLINT GRAY) - PLASTIC TRAY THAT MOUNTS TO THE PRINTER STAND LEGS - FOR 24-INCH PLOTTERS |
| C7781A |
24-INCH PRINTER STAND AND MEDIA BIN KIT FOR 800 SERIES (GRAPHITE GRAY) |
| C7782-60001 |
MEDIA BIN (FLINT GRAY) - PLASTIC TRAY THAT MOUNTS TO THE PRINTER STAND LEGS |
| C7782A |
24-INCH PRINTER STAND AND MEDIA BIN KIT FOR 500 SERIES (FLINT GRAY) |
| C7790-60086 |
ACCESS DOOR - COVERS THE TOP OF THE PRINTER AND PROVIDES ACCESS TO THE PRINT HEADS AND CARRIAGE |
| C7790-60089 |
INK SUPPLY STATION ASSEMBLY ISS SERVICE KITINK SUPPLY SERVICE STATION (ISS) ASSEMBLY - HOLDS THE INK CARTRIDGES AND PUMPS INK OUT TO THE PRINTHEADS |
| C7790-60091 |
POWER SUPPLY ROHS SV POWER SUPPLY ROHS SV WORLDWIDE INPUT POWER SUPPLY - 100-240VAC, 50/60HZ, 68W - INCLUDES FAN |
| C7790-60099 |
ENCODER STRIP - CLEAR STRIP WITH POSITION MARKS, ENCODER STRIP - B-SIZE - CLEAR STRIP WITH POSITION MARKS - USED BY THE SENSOR IN THE CARRIAGE ASSEMBLY TO DETERMINE POSITION |
| C7790-60100 |
BACK COVER - COVERS THE BACK OF THE PRINTER - LOCATED UNDER THE ACCESS DOOR |
| C7790-60102 |
FRONT COVER - COVERS THE FRONT AND CENTER OF THE PRINTER |
| C7790-60104 |
ENCODER STRIP HOLDER - WIRE LOOP THAT CONNECTS TO THE CARRIAGE ASSEMBLY THAT IS USED TO HOLD THE ENCODER STRIP |
| C7790-60106 |
PRINTHEAD DOOR ASSEMBLY - PROVIDES ACCESS TO THE PRINTHEADS - INCLUDES INK CARTRIDGE DOOR HINGE |
| C7790-60110 |
CARRIAGE DRIVE MOTOR |
| C7790-60112 |
RIDS ASSEMBLY FOR HP DESIGNJET 10PS 20PS 50PS |
| C7790-60117 |
RIGHT SIDE COVER ASSEMBLY - HOUSES THE INK CARTRIDGES |
| C7790-60118 |
LEFT SIDE COVER ASSEMBLY - HOUSES THE CONTROL PANEL |
| C7790-60119 |
DOOR SENSOR ASSEMBLY - SENSES WHEN THE ACCESS DOOR IS OPENED OR CLOSED |
| C7790-60120 |
MOTOR HARNESS FOR HP DESIGNJET 30GP |
| C7790-60121 |
ENCODER HARNESS |
| C7790-60124 |
INK TUBE HOLDER |
| C7790-60125 |
BELT TENSIONER SPRING |
| C7790-60129 |
FEED ROLLER ASSEMBLY - INCLUDES SHAFT WITH SIX ROLLERS, GEARS, AND ENCODER DISK |
| C7790-60144 |
INK SERVICE STATION (ISS) REAR ABSORBER FOAM |
| C7790-60145 |
INK SERVICE STATION (ISS) BOTTOM ABSORBER FOAM - ABSORBS INK DURING THE CLEANING PROCESS |
| C7790-60146 |
FILTER ASSEMBLY - LOCATED INSIDE THE RIGHT COVER ASSEMBLY |
| C7790-60147 |
CARRIAGE ROD FOR HP DESIGNJET 30GP |
| C7790-60148 |
INK CARTRIDGE COLOR LABEL - LOCATED UNDER CARTRIDGE ACCESS DOOR |
| C7790-60149 |
OUTPUT TRAY ASSEMBLY - INCLUDES OUTPUT TRAY, SLID OUT TRAY EXTENDER, AND ENVELOPE WIDTH STOP |
| C7790-60150 |
LEFT TRIM ASSEMBLY - LOCATED BETWEEN THE LEFT COVER ASSEMBLY AND THE CHASSIS |
| C7790-60202 |
PRINTHEAD ACCESS INSTRUCTION LABEL - LOCATED UNDER CARTRIDGE ACCESS DOOR |
| C7790-60203 |
CARRIAGE DRIVE BELT |
| C7790-60217 |
ELECTONICS END CAP |
| C7790-60278 |
CARRIAGE FOR DESIGNJET 10PS 20PS 50PS |
| C7790-60279 |
SERVICE STATION ASSEMBLY 6 FOAM INK DRAIN POCKETS. |
| C7790-60292 |
INK CARTRIDGE DOOR - PROVIDES ACCESS TO THE INK CARTRIDGES - FOR THE 10PS VERSION ONLY |
| C7790-60293 |
INK CARTRIDGE DOOR - PROVIDES ACCESS TO THE INK CARTRIDGES - FOR THER 20PS VERSION ONLY |
| C7790-60294 |
INK CARTRIDGE DOOR - PROVIDES ACCESS TO THE INK CARTRIDGES - FOR THE 50PS VERSION ONLY |
| C7790-60295 |
FILTER ASSEMBLY - LOCATED INSIDE THE RIGHT COVER ASSEMBLY |
