| Part |
Picture |
Description |
| Q6639A |
PAPER (GLOSSY) FOR PSC 1400 SERIES, OFFICEJET 5610 SERIES, OFFICEJET 5605 SERIES, OFFICEJET 5615 SERIES |
| Q6648A |
HP DESIGNJET 5500MFP |
| Q6651-60039 |
COLOR SENSOR ASSEMBLY - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60048 |
42-INCH SPINDEL - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60049 |
42-INCH SPINDEL - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60051 |
ENCODER SENSOR KIT - INCLUDES THE ENCODER STRIP ENCODER SENSOR AND ENCODER BRACKET FOR 42-INCH PLOTTERS |
| Q6651-60052 |
PREVENTIVE MAINTENANCE KIT - INCLUDES THE SCAN-AXIS MOTOR ENCODER STRIP BELT ASSEMBLY CARRIAGE ASSEMBLY WITHOUT PCA CUTTER ASSEMBLY AND COLOR SENSOR - FOR 42-INCH PLOTTERS (FOR 60 INCH Q6652-60147). |
| Q6651-60053 |
CARRIAGE ASSEMBLY - DOES NOT INCLUDE THE CARRIAGE PCA, ENCODER SENSOR, AND COLOR SENSOR |
| Q6651-60056 |
BACKPLANE BOARD - INTERCONNECTING BOARD |
| Q6651-60060 |
WINDOW SENSOR - FOR THE DESIGNJET Z6100 PHOTO PRINTER SERIES |
| Q6651-60063 |
OMAS CONTROLLER CARD - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60065 |
HARD DISK DRIVE (IDE HARD DRIVE) ASSEMBLY - OEM INCLUDES HOLDER AND SCREWS |
| Q6651-60066 |
PINCH WHEELS KIT SERV PINCHWHEEL KIT - FOR DESIGNJET PLOTTERS. INCLUDES X14PCS MALE AT 3.875" X13PCS FEMALE AT 1" AND X1PC FEMALE 1.625". |
| Q6651-60068 |
HARD DISK DRIVE (SATA) ASSEMBLY - OEM INCLUDES HOLDER AND SCREWS |
| Q6651-60081 |
LUBRICATION FELTS KIT - FOR DESIGNJET PRINTERS |
| Q6651-60254 |
FOOT ASSEMBLY - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60255 |
LEGS ASSEMBLY - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60256 |
HARDWARE KIT - INCLUDES SCREWS FOR LEGS ASSEMBLY |
| Q6651-60257 |
LEG COVER - COVERS BOTH THE LEFT AND RIGHT LEG ASSEMBLIES |
| Q6651-60258 |
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS - FOR 42-INCH PLOTTERS |
| Q6651-60259 |
FOOT BRACE ASSEMBLY - FOR 42-INCH PLOTTERS |
| Q6651-60260 |
BIN ASSEMBLY - INCLUDES THE BIN SUPPORT - FOR 42-INCH PLOTTERS |
| Q6651-60261 |
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS - FOR 60-INCH PLOTTERS |
| Q6651-60262 |
FOOT BRACE ASSEMBLY - FOR 60-INCH PLOTTERS |
| Q6651-60264 |
STAND SUPPORTS - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60265 |
PRIMER ASSEMBLY - HP DESIGNJET PRIMER ASSEMBLY AN ESSENTIAL COMPONENT USED FOR PRINTHEAD MAINTENANCE IN SEVERAL WIDE-FORMAT PRINTER MODELS PRIMER ASS'Y FIT TO HP DESIGNJET Z6200 Z6100 T7100 T7200 Z6800 D5800 |
| Q6651-60266 |
PRIMER VALVES AND PRIMER TUBES ASSEMBLY - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60268 |
OMAS CONTROLLER CARD - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60269 |
OPTICAL MEDIA ADVANCE SENSOR (OMAS) CABLE |
| Q6651-60270 |
OPTICAL MEDIA ADVANCE SENSOR (OMAS) MODULE |
| Q6651-60271 |
COLOR SENSOR ASSEMBLY - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60272 |
COLOR SENSOR ACTUATOR - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60274 |
SPINDLE HUB - 3-INCH - LOCATED AT END OF SPINDLE |
| Q6651-60276 |
CLEANING KIT - FOR DESIGNJET PRINTERS |
| Q6651-60277 |
PREVENTIVE MAINTENANCE KIT NUMBER TWO - INCLUDES THE AEROSOL FILTER, SERVICE STATION AEROSOL ASSEMBLY, INK ABSORBER, LEFT SPITTOON, COLOR SENSOR, LINE SENSOR, AND ENCODER STRIP |
| Q6651-60280 |
COMPLETE PINCHWHEEL ASSEMBLY - INCLUDES THE MEDIA SENSOR - FOR 42-INCH PLOTTERS |
| Q6651-60281 |
PRINT PLATEN (CENTER PLATEN - DENOTED #1) ASSEMBLY - FOR 42-INCH PLOTTERS. THIS PART IS A GENUINE REPLACEMENT COMPONENT USED ACROSS SEVERAL GENERATIONS OF HP DESIGNJET AND PRODUCTION-CLASS WIDE-FORMAT PRINTERS SPANNING A 42-INCH PRINT WIDTH. |
| Q6651-60282 |
PC BOARD FOR DESIGNJET L25500 SERIES, HP DESIGNJET L25500 PRINTER SERIES, DESIGNJET Z6100 |
| Q6651-60284 |
SERVICE STATION ASSEMBLY - INCLUDES THE SERVICE STATION CABLE |
| Q6651-60286 |
VACUUM FAN ASSEMBLY - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60287 |
UPPER INK SUPPLY STATION - INCLUDES THE CARTRIDGE TRAY BUT DOES NOT INCLUDE THE APS ASSEMBLY |
| Q6651-60288 |
LOWER INK SUPPLY STATION - INCLUDES THE CARTRIDGE TRAY BUT DOES NOT INCLUDE THE APS ASSEMBLY |
| Q6651-60289 |
INK SUPPLY TUBES AND TRAILING CABLE - FOR 42-INCH PLOTTERS (FOR 60 INCH ORDER Q6652-60112). |
| Q6651-60290 |
CARRIAGE ASSEMBLY - DOES NOT INCLUDE THE CARRIAGE PCA, ENCODER SENSOR, AND COLOR SENSOR |
| Q6651-60291 |
TOP COVER ASSEMBLY - FOR 42-INCH PLOTTERS |
| Q6651-60292 |
LEFT SIDE COVER ASSEMBLY - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60293 |
RIGHT SIDE COVER ASSEMBLY - DOES NOT INCLUDE THE RIGHT SIDE MAINTENANCE CARTRIDGE DOOR |
| Q6651-60295 |
OUTPUT PLATEN (FRONT PLATEN) ASSEMBLY DESIGNED FOR 42-INCH WIDE-FORMAT PLOTTERS. IT PROVIDES A FLAT STABLE SURFACE TO GUIDE PAPER EXACTLY UNDER THE PRINTHEADS DURING PRINTING. |
| Q6651-60296 |
PREVENTIVE MAINTENANCE KIT - INCLUDES THE SCAN-AXIS MOTOR, ENCODER STRIP, BELT ASSEMBLY, CARRIAGE ASSEMBLY WITHOUT PCA, CUTTER ASSEMBLY, AND COLOR SENSOR - FOR 42-INCH PLOTTERS |
| Q6651-60297 |
LINE SENSOR ASSEMBLY - INCLUDES HOLDER AND CABLE |
| Q6651-60298 |
ELECTRONICS MODULE COVERS KIT |
| Q6651-60300 |
AIR PRESSURE SYSTEM (APS) ASSEMBLY - FOR 42-INCH PLOTTERS |
| Q6651-60305 |
SAUSALITO PCI PC BOARD - FOR 42-INCH PLOTTERS |
| Q6651-60306 |
ELECTRONICS MODULE CABLES KIT - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60311 |
RIGHT ROLLFEED MODULE (RIGHT SIDE ROLLFEED HOUSING) ASSEMBLY - INCLUDES REWINDER COMPONENTS |
| Q6651-60313 |
EMPTY ELECTRONICS MODULE ASSEMBLY |
| Q6651-60315 |
LEFT SIDE SCAN-AXIS BRACKET |
| Q6651-60318 |
RIGHT SIDE MAINTENANCE CARTRIDGE DOOR |
| Q6651-60319 |
PINCHWHEEL (MEDIA) LEVER ASSEMBLY - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60320 |
DRIVE ROLLER ENCODER KIT - FOR 42-INCH PLOTTERS |
| Q6651-60321 |
RIGHT SIDE TRIM ASSEMBLY |
| Q6651-60322 |
LEFT SIDE TRIM ASSEMBLY |
| Q6651-60325 |
EXTERNAL SECONDARY SPITTOON - LOCATED ON THE LEFT SIDE OF THE PLOTTER. HP LEFT SPITOON FOR DESIGNJET PANTHER 6 PANTHER 8 Z6100/Z6200/Z6600/Z6800 AND SIMILAR UNITS. |
| Q6651-60326 |
BLANKING PLATE (SPITTOON) - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60327 |
FRONT PANEL BEZEL ASSEMBLY |
| Q6651-60328 |
CARTRIDGE TRAYS - HOLD THE INK CARTRIDGE ASSEMBLIES |
| Q6651-60330 |
PINCHWHEEL KIT - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60331 |
LEFT SIDE CONNECTOR COVER - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60332 |
RIGHT SIDE CONNECTOR COVER - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60333 |
REAR DOOR ASSEMBLY - FOR THE 42-INCH DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60334 |
INK SUPPLY TUBES CLIPS - FOR 42-INCH PLOTTERS |
| Q6651-60335 |
SETUP PRINTHEAD KIT - FOR THE DESIGNJET Z6100 PRINTER SERIES / DESIGNJET PLOTTER SET OF 8 INK SYSTEM PURGERS |
| Q6651-60336 |
REAR TUBE SHELF - INCLUDES BRACKETS - FOR 42-INCH PLOTTERS |
| Q6651-60337 |
CARRIAGE ASSEMBLY FLEX CABLES - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60338 |
CARRIAGE PRINTED CIRCUIT ASSEMBLY (PCA) BOARD DESIGNED FOR HP DESIGNJET AND LATEX LARGE-FORMAT PRINTERS LIKE Z6100 L25500 L26500 AND LATEX 210/260 SERIES PRINTERS |
| Q6651-60339 |
42-INCH SPINDEL - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-60341 |
CARRIAGE STOPPER - INCLUDES CARRIAGE STOPPER SCREW AND MEDIA-AXIS MOTOR BRACKET |
| Q6651-60343 |
QUICK REFERENCE GUIDE HOLDER |
| Q6651-60345 |
CENTER GUIDE (MEDIA INPUT) ASSEMBLY - FOR 42-INCH PLOTTERS |
| Q6651-60348 |
BACKPLANE BOARD - INTERCONNECTING BOARD |
| Q6651-60349 |
PRINTMECH PC BOARD - CONTROLS THE FUNTION OF THE PRINT MECHANISM |
| Q6651-60352 |
HARD DISK DRIVE (IDE HARD DRIVE) ASSEMBLY FOR HP DESIGNJET PLOTTERS. |
| Q6651-60355 |
STAND SUPPORTS - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6651-80017 |
COLOR SENSOR UNIT FOR HP DESIGNJET Z6100 Z6200 AND L25500 L26500 SERIES PLOTTERS. |
| Q6651A |
HP DESIGNJET Z6100 42-IN PRINTER |
| Q6652-60108 |
MEDIA-AXIS MOTOR - DRIVES THE DRIVE ROLLER ASSEMBLY - INCLUDES THE MEDIA ADVANCE DRIVE MOUNT AND CABLE - FOR 60-INCH PLOTTERS |
| Q6652-60109 |
PAPER DRIVE ROLLER ASSEMBLY - FOR 60-INCH PLOTTERS |
| Q6652-60110 |
COMPLETE PINCHWHEEL ASSEMBLY - INCLUDES THE MEDIA SENSOR - FOR 42-INCH PLOTTERS |
| Q6652-60111 |
PRINT PLATEN (CENTER PLATEN) ASSEMBLY - FOR 60-INCH PLOTTERS |
| Q6652-60112 |
INK SUPPLY TUBES AND TRAILING CABLE (ISS INK TUBES PCA) - FOR 60-INCH PLOTTERS (FOR 42 INCH ORDER Q6651-60289). |
| Q6652-60113 |
TOP COVER ASSEMBLY - FOR 60-INCH PLOTTERS |
| Q6652-60114 |
INPUT FEED ROLLER ASSEMBLY - FOR 60-INCH PLOTTERS |
| Q6652-60115 |
OUTPUT PLATEN (FRONT PLATEN) ASSEMBLY - FOR 60-INCH PLOTTERS |
| Q6652-60116 |
PREVENTIVE MAINTENANCE KIT - INCLUDES THE SCAN-AXIS MOTOR, ENCODER STRIP, BELT ASSEMBLY, CARRIAGE ASSEMBLY WITHOUT PCA, CUTTER ASSEMBLY, AND COLOR SENSOR - FOR 60-INCH PLOTTERS |
| Q6652-60117 |
AIR PRESSURIZATION SYSTEM (APS) ASSEMBLY - INCLUDES PUMP, HOLDER AND RELIEF VALVE - FOR 60-INCH PLOTTERS |
| Q6652-60118 |
BELT ASSEMBLY ONLY. FOR (BELT AND METALLIC PULLEY ORDER CQ869-67072).
BELT IF FOR 60-INCH PLOTTERS |
| Q6652-60119 |
ENCODER KIT - INCLUDES STRIP AND ENCODER SENSOR - FOR 60-INCH PLOTTERS |
| Q6652-60120 |
MEDIA DEFLECTORS - FOR ALL SIZE PLOTTERS |
| Q6652-60121 |
SAUSALITO PCI PC BOARD - FOR 60-INCH PLOTTERS (THIS 60-INCH MODEL CAN BE USED IN A 42-INCH PRINTER BUT A 42-INCH MODEL CANNOT BE USED IN A 60-INCH PRINTER) |
| Q6652-60123 |
DRIVE ROLLER ENCODER KIT (ALSO REFERRED TO AS A DRIVE ROLLER ENCODER SERV 60") DESIGNED FOR 60-INCH LARGE-FORMAT PRINTERS AND PLOTTERS. |
| Q6652-60124 |
REAR DOOR ASSEMBLY - FOR THE 60-INCH DESIGNJET Z6100 PRINTER SERIES |
| Q6652-60125 |
INK SUPPLY TUBES CLIPS - FOR 60-INCH PLOTTERS |
| Q6652-60126 |
REAR TUBE SHELF - INCLUDES BRACKETS - FOR 60-INCH PLOTTERS |
| Q6652-60127 |
60-INCH SPINDLE - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6652-60128 |
SCAN-AXIS MOTOR ASSEMBLY - FOR 60-INCH PLOTTERS DESIGNJET Z6100 Z6200 L25500 60 INCH CARRIAGE MOTOR |
| Q6652-60129 |
FRONT PANEL WINDOW COVER - FOR 60-INCH PLOTTERS |
| Q6652-60130 |
CENTER GUIDE (MEDIA INPUT) ASSEMBLY - FOR 60-INCH PLOTTERS |
| Q6652-60132 |
DESIGNJET MAINTENANCE KIT CLEANING WIPE LUBRICATION AND PADS. |
| Q6652-60145 |
60-INCH SPINDLE - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6652-60146 |
60-INCH SPINDLE - FOR THE DESIGNJET Z6100 PRINTER SERIES |
| Q6652-60147 |
PREVENTIVE MAINTENANCE KIT (ISS INK TUBES PCA) - INCLUDES THE SCAN-AXIS MOTOR ENCODER STRIP BELT ASSEMBLY CARRIAGE ASSEMBLY WITHOUT PCA CUTTER ASSEMBLY AND COLOR SENSOR - FOR 60-INCH PLOTTERS. (FOR 42 INCH Q6651-60052). |
