| Part |
Picture |
Description |
| C4723-60025 |
RIBBON CABLE ASSEMBLY WITH FERRITE - HAS 28-PIN (F) CONNECTORS - 1.7M (5.6FT) LONG |
| C4723-60040 |
BAIL MOTOR FOR HP DESIGNJET 3000CP |
| C4723-60060 |
MEDIA WEIGHT AND CORE KIT FOR THE TAKE-UP REEL |
| C4723-60063 |
Y-AXIS TENSIONER ASSEMBLY - APPLIES TENSION TO CARRIAGE BELT - INCLUDES WEDGE, TENSIONER SPRING, AND HOUSING |
| C4723-60064 |
TAKE-UP REEL SPINDLE ASSEMBLY |
| C4723-60071 |
TAKE-UP REEL SENSOR ASSEMBLY |
| C4723-60072 |
TAKE-UP REEL LEFT HAND SUPPORT ASSEMBLY |
| C4723-60077 |
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS |
| C4723-60084 |
PLOTTER STAND TRAY ASSEMBLY |
| C4723-60086 |
FOOT ASSEMBLY ONE EA. (INCLUDES CASTERS) - MOUNTS TO THE BOTTOM OF THE PLOTTER STAND LEGS (TWO USED) |
| C4723-60095 |
HARDWARE KIT - INCLUDES SCREWDRIVER AND SCREWS FOR PRINTER STAND |
| C4723-60096 |
CARRIAGE ASSEMBLY - INCLUDES CARRIAGE ASSEMBLY, LINE SENSOR, ENCODER, REAR BUSHING, CALIBRATION PEN, DIGITIZING SIGHT, GUAGES. |
| C4723-60110 |
MEDIA GUIDE BAR |
| C4723-60111 |
LEFT TRIM ASSEMBLY - AT LEFT OF ENTRY PLATEN |
| C4723-60114 |
ELECTRONICS MODULE - INCLUDES POWER SUPPLY, FAN, AND MAIN BOARD |
| C4723-60115 |
RIGHT END COVER - HAS CUT OUTS FOR THE CONTROL PANEL |
| C4723-60116 |
LEFT END COVER FOR HP DESIGNJET 2000CP |
| C4723-60134 |
AUTOCAD DRIVER GERMAN |
| C4723-60135 |
ACAD DRIVER FRENCH |
| C4723-60136 |
AUTOCAD DRIVER SPANISH |
| C4723-60137 |
AUTOCAD DRIVER ITALIAN |
| C4723-60140 |
AUTOCAD DRIVER SCHINESE |
| C4723-60141 |
PREVENTIVE MAINTENANCE KIT - CONTAINS CARRIAGE ASSEMBLY, LINE SENSOR COVER, ENCODER STRIP, Y-AXIS PULLEY, BELT, MOTOR, CUTTER, SILICON GREASE, PLASTIC SURFACE CLEANER, SYNTHETIC OIL AND WIPES (ON CHECK OUT NOTES LET US KNOW IF 36INCH OR 54INCH PLOTTER.) |
| C4723-60147 |
SPACER/MEDIA GUIDE FOR THE SUPPLY SPINDLE |
| C4723-60201 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (ENGLISH) |
| C4723-60202 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (KOREAN) |
| C4723-60203 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (TAIWANESE) |
| C4723-60204 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (GERMAN) |
| C4723-60205 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (FRENCH) |
| C4723-60206 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (SPANISH) |
| C4723-60207 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (ITALIAN) |
| C4723-60208 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (JAPANESE) |
| C4723-60209 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (PORTUGUESE) |
| C4723-60210 |
FRONT PANEL OVERLAY - SHOWS THE FUNCTION OF THE FRONT PANEL BUTTONS AND INDICATOR LIGHTS (CHINESE) |
| C4723-60211 |
MANUAL FOR DESIGNJET 3500 |
| C4723-60232 |
ENCODER STRIP - USED TO DETERMINE CARRIAGE POSITION 54INCH. |
| C4723-60234 |
OVERDRIVE ASSEMBLY - INCLUDES OVERDRIVE SHIMS, CLUTCH AND OVERDRIVE GEAR |
| C4723-60235 |
CARRIAGE (Y-AXIS) BELT - DRIVES THE CARRIAGE ASSEMBLY FOR 54 INCH SIZE PLOTTERS. (36 INCH SIZE ORDER C4704-60207) |
| C4723-60236 |
LIFT-UP VIEWING WINDOW |
| C4723-60237 |
CARRIAGE ASSEMBLY TRAILING CABLE - THREE RIBBON CABLES BUNDLED TOGETHER - 2.4M (7.7FT) LONG, 54 INCHES. |
| C4723-60238 |
ADJUSTMENT KIT - INCLUDES INSTRUCTIONS, EMPTY CARTRIDGE, DIGITIZING SIGHT (MAGNIFIER) AND GAUGE |
| C4723-60240 |
PINCHARM SHAFT ASSEMBLY - INCLUDES CAM JOURNALS MOUNTED ON EACH END |
| C4723-60241 |
ROLLFEED SPINDLE ROD ASSEMBLY - INCLUDES FLANGE AND CORE SPINDLE SPACER |
| C4723-60242 |
PAPER DRIVE (PLATEN) ROLLER ASSEMBLY - LONG GEAR DRIVEN ROLLER |
| C4723-60244 |
CUTTER ASSEMBLY - AUTO CUTTER FOR ROLLFEED PAPER |
| C4723-60245 |
ROLLFEED ACCESS COVER - OPENS FORWARD TO ALLOW ACCESS TO PAPER SPINDLE ASSEMBLY |
| C4723-60246 |
ENTRY PLATEN ASSEMBLY - CURVED COVER/GUIDE THAT IS NEXT TO THE PAPER DRIVE (PLATEN) ROLLER |
| C4723-60247 |
PINCHARM ASSEMBLY - CURVED BLACK PLASTIC PLATE WITH FOUR SMALL RUBBER ROLLERS - DOES NOT INCLUDE SPRING OR BUSHING |
| C4723-60249 |
REFILL ASSEMBLY - MOUNTED INSIDE THE LEFT HAND COVER - INCLUDES MOTOR AND GEARS |
| C4723-60250 |
STARGUARD STARWHEEL COVER ASSEMBLY |
| C4723-60263 |
8MB EDO (EXTENDED DATA OUTPUT) DRAM SIMM MEMORY MODULE |
| C4723-60264 |
16MB, 60NS EDO (EXTENDED DATA OUTPUT) DRAM SIMM MEMORY MODULE |
| C4723-60276 |
SERVICE STATION ASSEMBLY FOR HEWLETT PACKARD DESIGNJET PLOTTERS. |
| C4723-60277 |
CARRIAGE (Y-AXIS) MOTOR ASSEMBLY - DRIVES CARRIAGE BELT - INCLUDES MOTOR, MOTOR HOLDER, AND CABLE |
| C4723-60279 |
BAIL ASSEMBLY - MOUNTING STRIP ASSEMBLY FOR THE STARWHEEL MOUNT ASSEMBLIES (NOT INCLUDED) - EXTENDS WIDTH OF PLOTTER |
| C4723-60290 |
ELECTRONICS SUPPORT FRAME AND COVER SUPPORTS - INCLUDES THE SUPPORT LOCATED ABOVE THE REFILL INTERCONNECT CABLE AND THE TWO SUPPORTS USED TO MOUNT THE REAR COVER |
| C4723-60294 |
FIRMWARE SIMM KIT (REVISION A.04.08) - MOUNTS IN THE ELECTRONICS MODULE - NOTE: THIS IS NOT A POSTSCRIPT SIMM |
| C4723-60303 |
X-AXIS MOTOR ASSEMBLY - INCLUDES MOTOR, BELT, AND WORM GEAR -ORDER X-AXIS MOTOR ASSEMBLY KIT |
| C4723-69071 |
TAKE-UP REEL SENSOR ASSEMBLY |
| C4723-69096 |
CARRIAGE ASSEMBLY - INCLUDES CARRIAGE ASSEMBLY, LINE SENSOR, ENCODER, REAR BUSHING, CALIBRATION PEN, DIGITIZING SIGHT, GUAGES |
| C4723-69114 |
ELECTRONICS MODULE - INCLUDES POWER SUPPLY, FAN, AND MAIN BOARD |
| C4723-69294 |
FIRMWARE SIMM KIT (REVISION A.04.08) - MOUNTS IN THE ELECTRONICS MODULE - NOTE: THIS IS NOT A POSTSCRIPT SIMM |
| C4723-80021 |
EXTENSION SPRING - HOLDS THE ROLLFEED ACCESS COVER CLOSED |
| C4723-80027 |
CUTTER SHIM/BAIL SPRING |
| C4723A |
HP DESIGNJET 3000CP PRINTER |
| C4724-00001 |
NAMEPLATE - DESIGNJET 3500CP LOGO |
| C4724-60011 |
MANUAL KIT FOR DESIGNJET 3500, DESIGNJET 3000, DESIGNJET 3800 |
| C4724-60021 |
4.3GB HARD DISK DRIVE. THIS HARD DISK DRIVE IS THE DIRECT REPLACEMENT PART FOR THE INTERNAL HARD DISK DRIVE FOR THE HP DESIGNJET 2500CP, 3500CP, 3800CP, AND OTHER MODELS. |
| C4724-60053 |
X-AXIS MOTOR ASSEMBLY KIT - NEW DESIGN DOES NOT USE A BELT - KIT INCLUDES MOTOR WITH ATTACHED WORM GEAR, HELICAL GEAR, MOTOR MOUNT, SCREWS AND NUTS FOR MOUNTING THE PARTS. |
| C4724-69021 |
4.3GB HARD DISK DRIVE. THIS HARD DISK DRIVE IS THE DIRECT REPLACEMENT PART FOR THE INTERNAL HARD DISK DRIVE FOR THE HP DESIGNJET 2500CP, 3500CP, 3800CP, AND OTHER MODELS. |
| C4724-69053 |
X-MOTOR ASSEMBLY. MOTOR, BELT, AND WORM GEAR. (SAME AS C4724-60053) |
| C4724A |
HP DESIGNJET 3500CP PRINTER |
| C4780-60100 |
WHOLE UNIT FOR HP 09998390001 |
| C4780-69505 |
MOVES PAPER FROM TRAYS TO FEEDER ASSEMBLY, PAPER PICKUP FOR HP LASERJET. |
| C4780-80200 |
CARTON: MIT FOR HP 09998390001 |
| C4810-60066 |
NO. 11 BLACK INK PRINTHEAD |
| C4810-60067 |
11 CYAN INK PRINTHEAD |
| C4810A |
NO. 11 BLACK INK PRINTHEAD |
| C4811A |
NO. 11 CYAN INK PRINTHEAD |
| C4812-60005 |
11 MAGENTA INK PRINTHEAD |
| C4812A |
NO. 11 MAGENTA INK PRINTHEAD |
| C4813-60004 |
HP 11 - YELLOW INK PRINTHEAD |
| C4813A |
NO. 11 YELLOW INK PRINTHEAD |
| C4820-60015 |
BLACK PRINTHEAD CLEANER |
| C4820-80034 |
NO. 80 BLACK PRINTHEAD AND PRINTHEAD CLEANER BUNDLE |
| C4820-80100 |
INK SYSTEM RETURN KIT (BOX AND INSTRUCTIONS) - FOR RETURNING PRINTHEADS, PRINTHEAD CLEANER, AND INK CARTRIDGES |
| C4820A |
NO. 80 BLACK PRINTHEAD AND PRINTHEAD CLEANER BUNDLE |
| C4821-60005 |
CYAN PRINTHEAD CLEANER |
| C4821-80011 |
NO. 80 CYAN PRINTHEAD AND PRINTHEAD CLEANER BUNDLE |
| C4821A |
NO. 80 CYAN PRINTHEAD AND PRINTHEAD CLEANER BUNDLE |
| C4822-60059 |
MAGENTA PRINTHEAD CLEANER |
| C4822-80009 |
NO. 80 MAGENTA PRINTHEAD AND PRINTHEAD CLEANER BUNDLE |
| C4822A |
NO. 80 MAGENTA PRINTHEAD AND PRINTHEAD CLEANER BUNDLE |
| C4823-60003 |
YELLOW PRINTHEAD CLEANER |
| C4823-80014 |
NO. 80 YELLOW PRINTHEAD AND PRINTHEAD CLEANER BUNDLE |
| C4823A |
NO. 80 YELLOW PRINTHEAD AND PRINTHEAD CLEANER BUNDLE |
| C4836A |
HP 11 CYAN INK CARTRIDGE - PRINTS APPROXIMATELY 1750 COLOR GRAPHICS PAGES |
| C4836AA |
NO. 11 STANDARD CAPACITY CYAN INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (ASIA/PACIFIC) |
| C4836AE |
NO. 11 STANDARD CAPACITY CYAN INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (EUROPE) - |
| C4836AL |
NO. 11 STANDARD CAPACITY CYAN INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (LATIN AMERICA) |
| C4836AN |
HP 11 STANDARD CAPACITY CYAN INK CARTRIDGE - 28CC, PRINTS APPROXIMATELY 1750 PAGES AT 5% DENSITY PER COLOR (USA) |
| C4837A |
HP 11 MAGENTA INK CARTRIDGE - PRINTS APPROXIMATELY 1750 COLOR GRAPHICS PAGES |
| C4837AA |
NO. 11 STANDARD CAPACITY MAGENTA INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (ASIA/PACIFIC) |
| C4837AE |
NO. 11 STANDARD CAPACITY MAGENTA INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (EUROPE) - |
| C4837AL |
NO. 11 STANDARD CAPACITY MAGENTA INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (LATIN AMERICA) |
| C4837AN |
HP 11 STANDARD CAPACITY MAGENTA INK CARTRIDGE - 28CC, PRINTS APPROXIMATELY 1750 PAGES AT 5% DENSITY PER COLOR (USA) |
| C4838A |
HP 11 YELLOW INK CARTRIDGE - PRINTS APPROXIMATELY 1750 COLOR GRAPHICS PAGES |
| C4838AA |
NO. 11 STANDARD CAPACITY YELLOW INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (ASIA/PACIFIC) |
| C4838AE |
NO. 11 STANDARD CAPACITY YELLOW INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (EUROPE) - |
| C4838AL |
NO. 11 STANDARD CAPACITY YELLOW INK CARTRIDGE (HOLDS 28CCS OF INK) - PRINTS APPROXIMATELY1750 PAGES AT 5% DENSITY PER COLOR (LATIN AMERICA) |
| C4838AN |
HP 11 YELLOW INK CARTRIDGE - PRINTS APPROXIMATELY 1750 COLOR GRAPHICS PAGES (NORTH AMERICA) |
