| Part |
Picture |
Description |
| C6072-60161 |
CENTER PLATEN ASSEMBLY - INCLUDES OVERDRIVE ROLLERS AND SCREWS |
| C6072-60162 |
FRONT PLATEN ASSEMBLY - LONG, CURVED ITEM WITHOUT ROLLERS - INCLUDES PLATEN AND SCREWS |
| C6072-60163 |
DRIVE ROLLER GUIDE (GUIDE IS THE FULL WIDTH OF THE PLOTTER) - INCLUDES THE DRIVE ROLLER GUIDE AND MEDIA GUIDE STRIP |
| C6072-60164 |
LIFT-UP VIEWING WINDOW |
| C6072-60165 |
RIGHT COVER - INCLUDES FRONT PANEL CABLE - DOES NOT INCLUDE FRONT PANEL ASSEMBLY OR AEROSOL FAN |
| C6072-60167 |
LEFT COVER - COVERS THE INK TUBE SYSTEM AND HAS A DOOR TO ACCESS THE INK CARTRIDGES |
| C6072-60168 |
TOP COVER - COVERS THE TOP OF THE PRINT MECHANISM (NOT THE WINDOW) |
| C6072-60169 |
BACK COVER - INCLUDES BLANK SERIAL NUMBER LABEL |
| C6072-60170 |
BACK EMC COVER - INSTALLS BETWEEN THE REAR COVER AND THE PRINT MECHANISM |
| C6072-60171 |
LEFT REAR COVER KIT - COVERS ELECTRONICS MODULE NEAR THE DIMM COVER - INCLUDES FERRITE AND CLIP |
| C6072-60172 |
RIGHT REAR COVER - COVERS THE END OF THE ELECTRONICS MODULE THAT IS NOT NEAR THE DIMM COVER |
| C6072-60173 |
LEFT TRIM - ON THE LEFT ARC |
| C6072-60174 |
RIGHT TRIM - ON THE RIGHT ARC |
| C6072-60175 |
FRONT PANEL SEV-RCFRONT PANEL ASSEMBLY - INCLUDES FRONT PANEL CABLE (HAS 4 BUTTONS CANCEL, PRINT QUALITY BUTTON, FORM FEED BUTTON, AND COLOR BUTTON). |
| C6072-60176 |
DIMM COVER - COVERS THE DIMM SOCKETS IN THE ELECTRONICS MODULE |
| C6072-60177 |
EIO COVER - USED WHEN AN EIO SLOT IS EMPTY |
| C6072-60178 |
SERVICE STATION ASSEMBLY - INCLUDES DROP DETECTOR ASSEMBLY |
| C6072-60179 |
DROP DETECTOR (SENSOR) ASSEMBLY - INCLUDES SPITTOON FOAM - INSTALLED IN SERVICE STATION ASSEMBLY |
| C6072-60180 |
HARDWARE KIT FOR PRINTER STAND - INCLUDES SCREWDRIVER AND SCREWS |
| C6072-60182 |
FOOT ASSEMBLY (INCLUDES CASTERS) - MOUNTS TO THE BOTTOM OF THE STAND LEGS (TWO USED) |
| C6072-60183 |
PRINTER STAND TRAY - MOUNTED BETWEEN THE FEET OF PRINTER |
| C6072-60184 |
LEG ASSEMBLY - SIDE SUPPORT FOR THE PRINTER - DOES NOT INCLUDE THE FOOT ASSEMBLY |
| C6072-60185 |
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS |
| C6072-60186 |
REAR PLATEN ASSEMBLY |
| C6072-60188 |
REAR COVER MOUNTING BRACKET KIT - INCLUDES LEFT AND RIGHT BRACKETS |
| C6072-60189 |
CENTER GUIDE AND MEDIA SENSOR (GUIDE IS THE FULL WIDTH OF THE PLOTTER) |
| C6072-60190 |
MEDIA SENSOR FOR HP DESIGNJET 1050C SERIES |
| C6072-60191 |
PAPER DRIVE ROLLER ASSEMBLY - INCLUDES DRIVE ROLLER, ROLLER GEAR, AND ROLLER BRACKET |
| C6072-60192 |
LEFT ARC ASSEMBLY |
| C6072-60193 |
RIGHT ARC ASSEMBLY |
| C6072-60194 |
FRONT GUIDE ASSEMBLY (U-SHAPED) |
| C6072-60195 |
TUBE GUIDE ASSEMBLY |
| C6072-60196 |
TRAILING CABLE FOR HP DESIGNJET JET PLOTTERS, ATTACHES TO CARRIAGE UNIT - 36 INCH CABLE KIT WITH 3 CABLES, ONLY TRAILING CABLES INCLUDED. |
| C6072-60197 |
ENCODER STRIP FOR HP DESIGNJET 1050C SERIES |
| C6072-60198 |
CARRIAGE DRIVE BELT KIT FOR HEWLETT-PACKARD DESIGNJET PLOTTERS INCLUDES BELT CLEANING SPONGES AND SYNTHETIC OIL. |
| C6072-60199 |
CUTTER ACTUATOR ARM |
| C6072-60200 |
CUTTER ASSEMBLY KIT - INCLUDES MOUNTING HARDWARE - INSTALLED UNDER CARRIAGE ASSEMBLY |
| C6072-60206 |
DJ ADVD TECH TNG |
| C6072-60207 |
DJ BASIC TECH TNG |
| C6072-60208 |
MEDIA BIN - BETWEEN PRINTER STAND LEGS |
| C6072-60281 |
TOOLBOX AND DRIVER SOFTWARE - HP-GL/2 AND RTL DRIVERS FOR WINDOWS 3.1/95/98/NT 4.0 (ALL DESIGNJETS), AND TOOLBOX SOFTWARE FOR WINDOWS 95/NT 4.0 (ONLY FOR DESIGNJET 430/450C/455CA/1050C/1055CM) - ON 3.5-INCH 1.44MB FLOPPY DISKS (ENGLISH) |
| C6072-60284 |
SOFTWARE FOR DESIGNJET-C1633A, DESIGNJET 600, DESIGNJET 650, DESIGNJET 200 D SIZE |
| C6072-60285 |
SOFTWARE FOR DESIGNJET 750, DESIGNJET 430, DESIGNJET 450, DESIGNJET 3000 |
| C6072-60286 |
SOFTWARE FOR DESIGNJET-C1633A, DESIGNJET 600, DESIGNJET 650, DESIGNJET 200 D SIZE |
| C6072-60287 |
SOFTWARE FOR DESIGNJET-C1633A, DESIGNJET 600, DESIGNJET 650, DESIGNJET 200 D SIZE |
| C6072-60301 |
HP-GL/2 DRIVER SOFTWARE FOR AUTOCAD - FOR DOS AND WINDOWS 3.1/95/NT 4.0 - ON 3.5-INCH 1.44MB FLOPPY DISKS (ENGLISH) |
| C6072-60304 |
SOFTWARE FOR LASERJET II, LASERJET III, LASERJET 4 SERIES, LASERJET 4L SERIES |
| C6072-60305 |
SOFTWARE FOR LASERJET 8000 SERIES, COLOR LASERJET 4500 SERIES, LASERJET 5000 SERIES, LASERJET 4000 SERIES |
| C6072-60306 |
SOFTWARE FOR LASERJET 2100 SERIES, LASERJET 3100 SERIES, LASERJET 6P SERIES, LASERJET 8100 SERIES |
| C6072-60307 |
SOFTWARE FOR LASERJET II, LASERJET III, LASERJET 4 SERIES, LASERJET 4L SERIES |
| C6072-60368 |
MANUAL KIT - INCLUDES SETUP GUIDE, QUICK REFERENCE GUIDE, AND ASSEMBLY INSTRUCTIONS (JAPANESE) |
| C6072-60387 |
AIR PRESSURIZATION SYSTEM (APS) - INCLUDES PUMP, VALVE, PRESSURE SENSOR, AND APS HOUSING |
| C6072-60391 |
MEDIA GUIDE STRIP FOR HEWLETT-PACKARD (HP) PRINTERS |
| C6072-60393 |
TRAILING CABLE FOR HP DESIGNJET JET PLOTTERS, ATTACHES TO CARRIAGE UNIT - 36 INCH CABLE KIT WITH 3 CABLES |
| C6072-60394 |
CARRIAGE MOTOR - INCLUDES PULLEY |
| C6072-60395 |
MAINTENANCE KIT - ALL MAJOR WEARABLE PARTS INCLUDING, INK TUBE SYSTEM, CARRIAGE TRAILING CABLE KIT, CARRIAGE MOTOR, CARRIAGE DRIVE BELT. |
| C6072-60910 |
AEROSOL FAN ASSEMBLY, SITS INSIDE RIGHT COVER ASSEMBLY - BELOW CONTROL PANEL.(FOR VACUUM FAN C6072-60159) |
| C6072-69146 |
ELECTRONICS MODULE - CONTAINS POWER SUPPLY, MAIN LOGIC BOARD AND COOLING FAN. (ORDER JUST BOARD C6071-60001). |
| C6072-69147 |
CARRIAGE ASSEMBLY KIT - INCLUDES CARRIAGE, CARRIAGE HEIGHT TOOL CUTTER ASSEMBLY, AND LINE SENSOR - DOES NOT INCLUDE CABLE |
| C6074-00017 |
NAMEPLATE - DESIGNJET 1050C PLUS |
| C6074-60003 |
16MB EDO (EXTENDED DATA OUTPUT) DRAM DIMM MEMORY MODULE |
| C6074-60004 |
32MB EDO (EXTENDED DATA OUTPUT) DRAM DIMM MEMORY MODULE |
| C6074-60005 |
64MB EDO (EXTENDED DATA OUTPUT) DRAM DIMM MEMORY MODULE |
| C6074-60021 |
FIRMWARE DIMM FOR DESIGNJET 1050C/1050CM SERIES A.01.07 |
| C6074-60241 |
FRONT PANEL OVERLAY (ENGLISH) |
| C6074-60242 |
FRONT PANEL OVERLAY (KOREAN) |
| C6074-60243 |
FRONT PANEL OVERLAY (TAIWANESE) |
| C6074-60244 |
FRONT PANEL OVERLAY (GERMAN) |
| C6074-60245 |
FRONT PANEL OVERLAY (FRENCH) |
| C6074-60246 |
FRONT PANEL OVERLAY (SPANISH) |
| C6074-60247 |
FRONT PANEL OVERLAY (ITALIAN) |
| C6074-60248 |
FRONT PANEL OVERLAY (JAPANESE) |
| C6074-60249 |
FRONT PANEL OVERLAY (PORTUGUESE) |
| C6074-60250 |
FRONT PANEL OVERLAY (CHINESE) |
| C6074-60275 |
MEDIA FOR HP C6074A |
| C6074-60280 |
ELECTRONICS MODULE COVER |
| C6074-60281 |
PATA HDD 7.5GB HARD DISK DRIVE - INCLUDES THE HDD UNIT. (FOR SATA ORDER C6075-69285). |
| C6074-60282 |
POWER SUPPLY UNIT FOR HEWLETT PACKARD DESIGNJET PLOTTERS. |
| C6074-60283 |
MAIN LOGIC PC FORMATTER BOARD MAIN LOGIC PC BOARD DESIGNJET 1050C PLUS 1055CM PLUS MAIN LOGIC BOARD INCH B INCH VERSION BRG BOARD (HAS THERMISTOR INSTEAD OF CONNECTOR ). FOR INCH A INCH VERSION, PLEASE ORDER C6071-60001. |
| C6074-60284 |
ISS PC BOARD FOR HP DESIGNJET 1050C / 1055 PLOTTER SERIES. |
| C6074-60285 |
ELECTRONICS MODULE BASE - INCLUDES COOLING FAN AND POWER SUPPLY. |
| C6074-60286 |
RIGHT REAR ELECTRONICS MODULE COVER |
| C6074-60287 |
FIRMWARE AND MEMORY DIMM COVER |
| C6074-60288 |
128MB SDRAM DIMM MEMORY MODULE |
| C6074-60289 |
128MB SDRAM DIMM MEMORY MODULE |
| C6074-60310 |
BALANCED VACUUM FAN SERV |
| C6074-60340 |
FIRMWARE DIMM REVISION A.01.13 |
| C6074-60342 |
INK TUBE SYSTEM - DESIGNJET 1050C 1055CM INK TUBE SYSTEM UNIT. |
| C6074-60350 |
FIRMWARE DIMM FOR DESIGNJET 1050C/1050CM SERIES A.01.07 |
| C6074-60353 |
FIRMWARE DIMM - VERSION A.02.05 |
| C6074-60361 |
MAIN LOGIC PC BOARD DESIGNJET 1050C 1055CM PLUS MAIN LOGIC BOARD INCH A INCH VERSION ARE CONNECTORS. (B VERSION HAS THERMISTOR INSTEAD OF CONNECTOR ). |
| C6074-60383 |
AUTOMATIC ROLL SHEET SWITCH (ARSS) PARTS KIT - ARSS TORSION SPRING, ARSS AXLE GEAR, ARSS SWITCH LEVER |
| C6074-60384 |
CRG BASE FOR HP DESIGNJET 1055 SERIES |
| C6074-60385 |
PINCH ASSEMBLY - INCLUDES PINCH CAM, PINCH ROLLERS AND SPRINGS |
| C6074-60386 |
INK SUPPLY STATION (ISS) - HAS FOUR SLOTS FOR INK CARTRIDGES |
| C6074-60387 |
AIR PRESSURIZATION SYSTEM (APS) - INCLUDES PUMP, VALVE, PRESSURE SENSOR, AND APS HOUSING |
| C6074-60388 |
CARRIAGE ASSEMBLY KIT - INCLUDES CARRIAGE, CARRIAGE HEIGHT TOOL CUTTER ASSEMBLY, AND LINE SENSOR - DOES NOT INCLUDE CABLE |
| C6074-60389 |
AUTOMATIC ROLL SHEET SWITCH (ARSS) ASSEMBLY - SMALL, LONG ROLLER AND HOUSING - USED TO FEED CUT SHEET MEDIA |
| C6074-60390 |
RIGHT ROLL FEED MODULE |
| C6074-60391 |
RIGHT ROLL FEED BRAKE - INSTALLED IN RIGHT ROLL FEED MODULE |
| C6074-60392 |
LEFT ROLL FEED BRAKE - INSTALLED IN LEFT ROLL FEED MODULE |
| C6074-60393 |
LEFT ROLL FEED MODULE |
| C6074-60394 |
VACUUM/AEROSOL FAN ASSEMBLY - INCLUDES THE FAN AND AIR FLOW GUIDE |
| C6074-60395 |
PAPER-AXIS MOTOR - INCLUDES HELICAL GEAR AND GREASE - MOTOR THAT PROVIDES POWER TO FEED PAPER FOR PRINTING PROCESS |
| C6074-60396 |
RIGHT COVER - INCLUDES FRONT PANEL CABLE - DOES NOT INCLUDE FRONT PANEL ASSEMBLY OR AEROSOL FAN |
| C6074-60397 |
RIGHT TRIM - ON THE RIGHT ARC |
| C6074-60398 |
FRONT PANEL SEV-RCFRONT PANEL ASSEMBLY - INCLUDES FRONT PANEL CABLE ( HAS CANCEL BUTTON, PRINT QUALITY BUTTON, FORM FEED BUTTON, AND COLOR BUTTON). |
| C6074-60399 |
SERVICE STATION ASSEMBLY - INCLUDES DROP DETECTOR ASSEMBLY |
| C6074-60400 |
DROP DETECTOR (SENSOR) ASSEMBLY - INCLUDES SPITTOON FOAM - INSTALLED IN SERVICE STATION ASSEMBLY |
| C6074-60401 |
CENTER GUIDE AND MEDIA SENSOR (GUIDE IS THE FULL WIDTH OF THE PLOTTER) |
| C6074-60402 |
MEDIA SENSOR FOR HP DESIGNJET 1050C SERIES |
