| Part |
Picture |
Description |
| B6Y14A |
HP 771C 775-ML LIGHT GRAY DESIGNJET INK CARTRIDGE |
| B6Y15A |
771A 775-ML MATTE BLACK DESIGNJET INK CARTRIDGE |
| B6Y16A |
771A 775-ML CHROMATIC RED DESIGNJET INK CARTRIDGE |
| B6Y17A |
771A 775-ML MAGENTA DESIGNJET INK CARTRIDGE |
| B6Y18A |
771A 775-ML YELLOW DESIGNJET INK CARTRIDGE |
| B6Y19A |
771A 775-ML LIGHT MAGENTA DESIGNJET INK CARTRIDGE |
| B6Y20A |
771A 775-ML LIGHT CYAN DESIGNJET INK CARTRIDGE |
| B6Y21A |
771A 775-ML PHOTO BLACK DESIGNJET INK CARTRIDGE |
| B6Y22A |
771A 775-ML LIGHT GRAY DESIGNJET INK CARTRIDGE |
| B9E24-67015 |
T3500 FORMATTER W/HDD SVC |
| B9E24-67017 |
T3500 ENGINE PCA |
| B9E24-67020 |
SCANNER CONTROLLER UNIT LW2 PCA SV - SCANNER CONTROLLER PCA (SCU) (T3500 AND COMPATIBLE WITH T2500) |
| B9E24-67022 |
PINCH ARM TOP ROLL - FOR T3500 MODELS ONLY |
| B9E24-67023 |
CRYPTO ASIC SIM CHIP PCA ASSEMBLY - MOUNTS ON THE ENGIEN PCA - FOR THE T3500 SERIES |
| B9E24-67029 |
T3500 FORMATTER W/HDD SVC |
| B9E24-67030 |
T3500 HARD-DRIVE / HDD WITH FIRMWARE SVC |
| C0E65A |
HP DESIGNJET 36-INCH ROLLFEED SPINDLE |
| C0F08A |
HP COLORFAST ADH VINYL 36INX40FT 2 PACK |
| C1633-00002 |
ENCODER STRIP SPRING - INSTALLED ON RIGHT SIDE OF PLOTTER |
| C1633-00009 |
AXIAL BIAS PLATE - INSTALLED BETWEEN THE PAPER DRIVE (PLATEN) ROLLER ASSEMBLY AND THE RIGHT FRAME |
| C1633-00019 |
MEDIA BIN BACK - FOR TOP OF WIRE RACK BELOW PLOTTER |
| C1633-00020 |
MEDIA BIN FRONT - MAIN PART OF WIRE RACK BELOW PLOTTER |
| C1633-00031 |
MIO SLOT ACCESS COVER |
| C1633-00033 |
MIO SUPPORT - METAL HOUSING FOR THE PLUG-IN MIO CARD - DOES NOT INCLUDE THE BOARD GUIDES |
| C1633-00044 |
MEDIA BIN ADJUST - ADJUSTABLE MEDIA BOTTOM STOP IN WIRE RACK |
| C1633-00053 |
SIMM PLATE - COVERS ACCESS TO SIMM SLOT CONNECTORS |
| C1633-00056 |
TRAILING CABLE FRONT GUIDE (TRAY) |
| C1633-00068 |
DOOR FOR TENSIONER HOUSING |
| C1633-00080 |
POWER SUPPLY INSULATOR (BOTTOM) |
| C1633-00132 |
ENCODER SPRING BRACKET |
| C1633-18008 |
LOW ROM (REVISION 2.1) - NOTE: THE HIGH AND LOW ROMS MUST BE THE SAME REVISION |
| C1633-18009 |
HIGH ROM (REVISION 2.1) - NOTE: THE HIGH AND LOW ROMS MUST BE THE SAME REVISION |
| C1633-20006 |
X AXIS MOTOR MOUNT |
| C1633-20012 |
PINCH ARM BAR CAM (E-SIZE) - LONG ROD FROM LEFT TO RIGHT SIDE OF PRINTER - USED TO LIFT THE PINCH ARMS |
| C1633-20034 |
BUSHING FOR REDUCTION PULLEY |
| C1633-40001 |
SERVICE STATION HOUSING - THE BASE OF THE SERVICE STATION ASSEMBLY |
| C1633-40003 |
SERVICE STATION COVER |
| C1633-40006 |
WIPER PAD |
| C1633-40019 |
OVERDRIVE GEAR CLUSTER |
| C1633-40027 |
BAIL ENGAGING LEVER GEAR |
| C1633-40028 |
BAIL LIFT CAM GEAR |
| C1633-40030 |
PINCHWHEEL MANUAL LIFT HANDLE - PAPER LOADING LEVER |
| C1633-40037 |
RIGHT BAIL BRACKET |
| C1633-40038 |
LEFT BAIL BRACKET FOR HEWLETT PACKARD DESIGNJET PLOTTERS. |
| C1633-40047 |
RIGHT END COVER - FOR END OF UPPER STAND (CHASSIS) ASSEMBLY |
| C1633-40052 |
BAIL LIFT CAM - ACTIVATES THE BAIL LIFT LEVER (PART OF THE BAIL LIFT MECHANISM KIT) |
| C1633-40064 |
MEDIA SENSOR MOUNTING BRACKET |
| C1633-40065 |
TENSIONER HOUSING - HOLDS THE TENSIONER WEDGE AND TENSIONER SPRING FOR THE CARRIAGE DRIVE BELT IDLER PULLEY |
| C1633-40075 |
LIFT-UP VIEWING WINDOW (CLEAR) |
| C1633-40082 |
PINCHARM SPRING RETAINING BUSHING |
| C1633-40089 |
OVERDRIVE MOUNT BLOCK |
| C1633-40092 |
STARWHEEL CLIP FOR HP DESIGNJET-C1633A |
| C1633-40093 |
ENCODER STRIP BRACKET |
| C1633-40094 |
HOLDER - FOR HELP CARD AND HAND HELD CUTTER |
| C1633-60014 |
CABLE ASSEMBLY WITH FERRITE - 18-PIN (F) CONNECTOR TO FOUR CABLES - OTHER CONNECTORS ARE TWO 4-PIN (F), ONE 4-PIN (M), AND ONE 6-PIN (F) - OVERALL LENGTH IS 93CM (37.8IN) |
| C1633-60020 |
AC POWER RECPTACLE ASSEMBLY - INCLUDES RECEPTACLE, WIRES, GROUNDING LUG, AND SOCKET TO POWER SUPPLY |
| C1633-60029 |
Y-DRIVE ASSEMBLY BRACKET |
| C1633-60030 |
CLUTCH / OVERDRIVE GEAR ASSEMBLY - INCLUDES GEAR, CLUTCH, RETAINING CLIP, AND TWO WASHERS. |
| C1633-60032 |
STARGUARD ASSEMBLY |
| C1633-60033 |
AUTOMATIC CARTRIDGE ADJUST LINKAGE |
| C1633-60039 |
PINCHARM ASSEMBLY - CURVED BLACK PLASTIC PLATE WITH FOUR SMALL RUBBER ROLLERS - DOES NOT INCLUDE SPRING OR BUSHING |
| C1633-60040 |
CONTROL PANEL OVERLAY (JAPANESE) |
| C1633-60041 |
CONTROL PANEL OVERLAY (GERMAN) |
| C1633-60042 |
CONTROL PANEL OVERLAY (FRENCH) |
| C1633-60043 |
CONTROL PANEL OVERLAY (ITALIAN) |
| C1633-60044 |
CONTROL PANEL OVERLAY (SPANISH) |
| C1633-60045 |
CONTROL PANEL OVERLAY (ENGLISH) |
| C1633-60050 |
CARRIAGE ASSEMBLY TRAILING CABLE - 28-PIN (F) CONNECTOR TO 28-PIN (F) CONNECTOR ATTACHED TO MOUNTING HARDWARE - 1.6M (5.3FT) LONG |
| C1633-60051 |
STARWHEEL ASSEMBLY - SMALL PLASTIC WHEEL WITH METAL TEETH |
| C1633-60120 |
CARRIAGE ASSEMBLY - INCLUDES CARRIAGE PC BOARD |
| C1633-68103M |
(INK) DROP SENSE BOARD |
| C1633-68105M |
INTERCONNECT BOARD |
| C1633-69101 |
MAIN LOGIC BOARD |
| C1633-80003 |
BLADE SPRING - INSTALLED ON RIGHT SIDE OF TRAILING CABLE FRONT GUIDE |
| C1633-80004 |
EXTENSION SPRING - HOLDS THE ROLLFEED ACCESS COVER CLOSED |
| C1633-80005 |
COMPRESSION SPRING - INSTALLED BETWEEN PINCHARM ASSEMBLY AND BUSHING |
| C1633-80006 |
BAIL ENGAGING LEVER SPRING |
| C1633-80014 |
COMPRESSION SPRING - FOR THE REAR BUSHING ON THE CARRIAGE |
| C1633-80016 |
LINKAGE SPRING - INSTALLED BETWEEN Y-TENSIONER BRACKET AND AUTOMATIC CARRIAGE ADJUST LINKAGE |
| C1633-90000 |
C1633A/B DESIGNJET PLOTTER SERVICE MANUAL |
| C1633-90001 |
C1633A DESIGNJET PLOTTER USERS MANUAL |
| C1633-90005 |
C1633A DESIGNJET PLOTTER USERS MANUAL (FRENCH) |
| C1633-90006 |
C1633A DESIGNJET PLOTTER USERS MANUAL (SPANISH) |
| C1633-90007 |
C1633A DESIGNJET PLOTTER USERS MANUAL (ITALIAN) |
| C1633-90008 |
C1633A DESIGNJET PLOTTER USERS MANUAL (JAPANESE) |
| C1633-90014 |
C1633A DESIGNJET PLOTTER SET-UP GUIDE (GERMAN) |
| C1633-90015 |
C1633A DESIGNJET PLOTTER SET-UP GUIDE (SPANISH) |
| C1633-90016 |
C1633A DESIGNJET PLOTTER SET-UP GUIDE (FRENCH) |
| C1633-90017 |
C1633A DESIGNJET PLOTTER SET-UP GUIDE (ITALIAN) |
| C1633-90034 |
C1633A DESIGNJET PLOTTER QUICK REFERENCE GUIDE (GERMAN) |
| C1633-90035 |
C1633A DESIGNJET PLOTTER QUICK REFERENCE GUIDE (SPANISH) |
| C1633-90036 |
C1633A DESIGNJET PLOTTER QUICK REFERENCE GUIDE (FRENCH) |
| C1633-90037 |
C1633A DESIGNJET PLOTTER QUICK REFERENCE GUIDE (ITALIAN) |
| C1633-90041 |
C1633B DESIGNJET PLOTTER USERS GUIDE |
| C1633-90044 |
C1633B DESIGNJET PLOTTER USERS GUIDE (GERMAN) |
| C1633-90048 |
C1633B DESIGNJET PLOTTER USERS GUIDE (JAPANESE) |
| C1633A |
HP DESIGNJET PRINTER (C1633A) |
| C1806A |
BLACK INK SYSTEM - INCLUDES PRINT HEAD, PRINT HEAD CLEANER AND INK CARTRIDGE |
| C1807A |
CYAN INK SYSTEM - INCLUDES PRINT HEAD, PRINT HEAD CLEANER AND INK CARTRIDGE |
| C1808A |
MAGENTA INK SYSTEM - INCLUDES PRINT HEAD, PRINT HEAD CLEANER AND INK CARTRIDGE |
| C1809A |
YELLOW INK SYSTEM - INCLUDES PRINT HEAD, PRINT HEAD CLEANER AND INK CARTRIDGE |
| C1824A |
MEDIA FOR HP C5894A |
| C1825A |
MEDIA FOR HP C8136A |
| C1826A |
HIGH-GLOSS WHITE FILM - ARCHITECTURAL E SIZE (36 X 48-INCHES) - 100 SHEETS |
| C1827A |
HIGH-GLOSS WHITE FILM - ARCHITECTURAL D SIZE (24 X 36-INCHES) - 100 SHEETS |
| C1828A |
FILM (GLOSSY) FOR DESIGNJET 700 SERIES, DESIGNJET 455, DESIGNJET 450, DESIGNJET 750 |
| C1829A |
FILM (GLOSSY) FOR DESIGNJET 450, DESIGNJET 455, DESIGNJET 488, DESIGNJET 700 SERIES |
| C1830A |
MEDIA FOR HP C4716A |
| C1831A |
MEDIA FOR HP C6081A |
| C1832A |
MEDIA FOR HP C6083A |
| C1833A |
MEDIA FOR HP C6081A |
